产品安全申请认证所需资料

UL 产品安全申请认证所需资料

按标准要求,厂商在测试前需提供我方下列资料：

1. 填写：产品安全验证申请客户资料表 附件

2. 填写：产品基本资料清单 附件

----此清单包括所有零件之産品型号、生産厂家、零部件编号及有关参数电流、电压、功率、阻燃等级等;

----对於具有安规认证的元器件,例如：电源线、插头、开关、温控器、保-险管等,请提供欧洲认证证书复印件;与安全有关之零部件,如未具有安全认证,请提供技术参数,包括産品型号、生産厂家、额定电流、电压、工作温度等,以便由我方进行随机测试;

.电路图

.线路图

----请标注实际尺寸;

.最终定型样品

----2-4个/型号按我中心要求准备;

.爆炸图分解图

产品安全验证申请客户资料表

附件

1. 认证标准 Certification UL 其他

2. 产品名称及型号：

附上产品相关资料如目录、结构图、线路图、规格、功能等 有 无

3. 申请人Applicant

公司名称/Name 中文/Chinese

英文/English

地 址/Address 中文/Chinese

英文/English

电话TEL 传真FAX E-mail

联络人/负责人中文/Chinese 英文/English

Contact Person/Representative

4. 工厂Manufacturer 同申请者 若工厂数量在一家以上,请自行加页一一列出

工厂名称/Name 中文/Chinese

英文/English

地 址/Address 中文/Chinese

英文/English

电话TEL 传真FAX E-mail

联络人/负责人中文/Chinese 英文/English

Contact Person/Representative

5. 登录者Listee/Recognized Company/Classified Company 同申请者 同工厂

公司名称/Name 中文/Chinese

英文/English

地 址/Address 中文/Chinese

英文/English

电话TEL 传真FAX E-mail

联络人/负责人中文/Chinese 英文/English

Contact Person/Representative

Product Technical Information 产品基本资料清单

附件

为协助验证单位对 贵公司之产品有更进一步的了解,请提供 贵公司产品之下列初步资料,以供正确估价或预估测试项目;若此表不便详述 贵公司之产品,请以其他方式说明;

1. 产品型号/Grade Designation:

If you wish to submit more than one formulation please provide a unique

designation for each formulation.

2. 原料名称/Generic Polymer Material:

如矽胶silicone or silicone rubber, PC, PP, ABS, PMI,……等, for each

formulation;若是含填充物, 请注明最大及最小百分比; 若是共聚合物如分子量不同,也请注明成份重量百分比;

Please indicate the generic polymer ABS, PPHOX, PC, etc. for each

formulation. If the material will contain filler material, please

indicate the composition of the filler material and the minimum and

maximum percent of filler that will be used in the formulation. If the

material is a co-polymer, please indicate the percent of each polymer

as well as the molecular weight of the co-polymer.

3. 防火等级/Flammability Class:

譬如: 94V-0, V-1, V-2, HB, VTM-0, VTM-1, VTM-2, HBF, HF-1. HF-2, 5VA/5VB

V test ：启动开关後,不需使用者持续操作即可自行运作的家电产品,其所使用的塑料需通过V 燃烧测试;

HB test：灯具及使用时必须由使用者持续操作的电器家电产品,如hair dryer等, 必须要通过HB 燃烧测试;

HBF test：针对发泡塑胶材料使用在电器产品及其他装置的零件上但是不用於结构支撑

VTM test：同V test,只是产品厚度太薄, 约0.25mm.

4. 最大及最小厚度: Min. Thickness mm

Max Thickness mm

如果只申请一个厚度,将来只能生产该厚度+10% 误差以内的产品;

Please note that if only one thickness is specified, we will restrict

your Recognition to that thickness only.

In production an applicable tolerance, usually 10%, will be allowed.

5. 产品运送型式/Form of Shipment:

如颗粒、薄片、粉末、液体 ……….等;

For example, pellets, sheets, powder, two liquid components, finished

products etc.

6. 所欲申请颜色/Colors:

申请all colors请提供natural color原料原色,白色,黑色,及红色, all

colors代表以後可以生产任何颜色;

Natural, White, Black, and Red will represent all colors.

7. 产品成分百分比/Material Composition:

建议提供;

Please include all additives glass, metallic, or other combustible

fillers, lubricants, flame retardants, plasticizers, UV stabilizers,

etc. as well as the total percentage of each in the final polymer. This

information will be for UL internal use only and is requested in order

to help us determine what, if any, testing will be required if you should

decide to make a minor formulation change in the future. The information

is not published in any UL public document. This information is not

required for Recognition of your material but if you decide not to supply

this information, additional testing will may be encountered if you

decide to make a formulation change.

8. RTI-最大操作温度: Electrical

0C

Mechanical w/ impact

0C

Mechanical w/o impact

0C

如silicone及silicone rubber皆已经认定为150℃,若要申请认证超过150℃,则需要另测 Long Term Thermal Aging Test LTTA;各材料RTI请参阅UL 746B

Standard Table 所示;

Depending on the use temperature in the end-use product, some materials

may be required to show temperature stability at elevated temperatures.

Table of UL 746B presents a list of materials which have been assigned

a generic Relative Thermal Index RTI in accordance with significant test

experience and/or field experience UL has had with these materials. A

copy of this table has been attached.

If a material is not referenced in UL746B, the material will be assigned

a generic RTI of 50°C. If you wish to have a higher rating than the

generic RTI, Long Term Thermal Aging in accordance with UL746B will be

required. If you feel your material may require an elevated RTI, please

contact the undersigned and we will provide you with additional

information concerning this test program.

9. 产品制造步骤/Manufacturing Process:

建议提供;

In order to determine the appropriate generic RTI for your epoxy

material, we will need to know how the material is processed such as form

molding, injection molding, etc.. Please advise if polymerization

occurs at elevated temperatures be sure to specify curing time and

temperature or pressures. If the material is furnished in the form of

two or more liquid components we will need a separate identifier for each

component, the mixing ratio of the different components, and the curing

conditions Temperature/Time for the material.

10.加拿大认证/CUL: □ Yes □ No

UL将主动为您办理,并不额外收费,除非您告知不办理;CUL认证可以使您的产品进入加拿大;

UL has established a Canadian Certification Service whereby your

material will also receive Recognition according to a National Standard

of Canada, CAN/CSA- No. -92. Because the service is generally requested

in most cases, we will provide CUL Recognition with every UL Recognition

unless you specifically state that you do not require this additional

certification. You should be aware that Canadian certification

includes a difference in the marking requirement, as follows:

Marking:

UL - Company name or trademark and grade designation on wrapper,

container or part.

CUL - Manufacturer's name, tradename or trademark, polymer

identification, compound number, color number, where appropriate;

batch number, lot number or date of manufacture on bag, carton or

container.

If you have any questions or require any additional information about

the UL Canadian Certification Service, please contact us.

11.其他测试项目/Additional Tests: □ Yes □ No

□ H W I：Hot Wire ignition

□ H A I ：High-Current Arc Ignition Performance Level Categories

□ HVAR：High-Vortage Arc Ignition Performance Level Categories

□ HATR：High-Vortage Arc-Tracking-Rate Performance Level Categories

□ D-495：

□ C T I ： Comparative Tracking Index

□ GWI ： Glow-Wire Ignition Test

□ V R ： Volume Resistivity

□ S R ： Surface Resistivity

□ D S ： Dielectric Strength

如Electrical Tests or Physical Tests等;电气项目包括： HAI, HWI, HVAR,

HVTR, CTI, D-495, Volume/Surface Resistivity 体积电阻与表面电阻,

Dielectric Strength 耐压; 如果您的产品是要用在电器成品上,可能需要做电气测试,此项由客户自选,但若没,您的产品可能不能用於电器成品或将来需要时,则可以另行补测,但Identification Test成份/配方比对可能需再测一次来与先前测试结果比对;请与您的客户联络, 了解他们的成品如电视、电脑萤幕、电话, 烤箱, 烤面包机,………………., etc在向UL申请该成品安全认证时,需要何种额外的安全测试项目;

H A I：产品将来会与非绝缘材料live parts接触或接近 arcing parts- in

non-arcing parts – 1/32 in

H W I：产品将来用在end products 上时会与非绝缘材料live parts接触近於1/32 in以内

The testing you require on your material will depend on the needs of

the end-product manufacturer as defined by the UL Standard for that

product. We recommend checking with the end-product manufacturer

and/or a UL engineer who evaluates the end-product your material will

be used in, to determine what testing should be conducted on your

material in order to meet the needs of your clients. Please let us know

if you require any assistance in contacting the UL engineer who evaluates

the end-product your material will be used in and we will forward your

request to the appropriate department.

12.相关注意事项:

第一次工厂生产检验/INITIAL PRODUCTION INSPECTION IPI:

在工程部门完成报告後,UL会通知当地的检验中心至贵工厂进行第一次生产检验 IPI,完成IPI 後,检验员会将临时的报告交给您,您即授权可以使用UL的标志;

Once our engineering investigation has been completed and your product

is determined to comply with our requirements, a procedure report will

be prepared. We will then send a copy of the procedure report to our

field representative in your area. Our field representative will then

contact the representative at your manufacturer and arrange for a time

to deliver the new report and to conduct an IPI. The purpose of the IPI

will be to determine that your product is appropriately described in

our report and that you are aware of the requirements for marking your

products with the UL Recognition mark. In order to avoid any delays

please provide the following information for each manufacturer that will

be producing a marking your product with the UL Recognition mark:

1). Complete name and address.

2). Name, telephone, and fax number of the factory representative.

3). Date you intend to begin production of UL Recognized Fabricated

Parts.

季检验/FOLLOW-UP SERVICES:

UL检验员将会每季不定期至贵工厂检验及每年抽验样品复测;

Once your IPI has been completed, you may expect to receive a visit from

our field representatives quarterly. In addition, we will pick up

samples of your product from the production line yearly in order to

determine continued compliance with our requirements.

＜请您填写完毕之後,回传给台湾科技验证电子邮件,并请在主旨栏上注明 贵公司的名字＞

敬祝 工作顺利