博科BrocadeSAN交换机常用命令

博科BrocadeSAN交换机常用命令

博科BrocadeSAN交换机常用命令

编辑整理：

尊敬的读者朋友们：

这里是精品文档编辑中心，本文档内容是由我和我的同事精心编辑整理后发布的，发布之前我们对文中内容进行仔细校对，但是难免会有疏漏的地方，但是任然希望（博科BrocadeSAN交换机常用命令）的内容能够给您的工作和学习带来便利。同时也真诚的希望收到您的建议和反馈，这将是我们进步的源泉，前进的动力。

本文可编辑可修改，如果觉得对您有帮助请收藏以便随时查阅，最后祝您生活愉快 业绩进步，以下为博科BrocadeSAN交换机常用命令的全部内容。

博科BrocadeSAN交换机常用命令

博科Brocade SAN交换机常用命令

1.查看IP地址命令 ............................................. 3

2。查看firmware版本 .......................................... 3

3.查看交换机状态 .............................................. 3

4.查看交换机license—id ...................................... 4

5.配置ZONE ................................................... 4

6。查看zone配置文件 .......................................... 5

7.查看ZONE ................................................... 6

8.查看系统日志信息 ............................................ 7

9.关机 ........................................................ 7

10.设置博科Brocade交换机IP地址 .............................. 7

11。博科brocade交换机查看OS版本信息 ......................... 7

12。博科brocade交换机添加license授权信息 .................... 7

13。查看博科brocade交换机license授权信息 .................... 7

14。博科Brocade Slikworm 300交换机license ................... 8

15。博科Brocade交换机修改密码命令 ............................ 8

16。博科 brocade SAN交换机密码重置 ........................... 8

17。登陆后是用passwddefault命令恢复出厂密码 .................. 9

18。交换机升级 ............................................... 10

19.帮助信息 .................................................. 14

博科BrocadeSAN交换机常用命令

1.查看IP地址命令

swd77:admin> ipaddrshow

SWITCH

Ethernet IP Address： 10.77.77。77

Ethernet Subnetmask： 255。255.255.0

Fibre Channel IP Address： none

Fibre Channel Subnetmask: none

Gateway IP Address： none

DHCP： Off

swd77:admin〉

2.查看firmware版本

swd211：admin〉

swd211:admin〉 firmwareshow

Appl Primary/Secondary Versions

-—-——--——-——------————-—---———-—-—---——-—-

FOS v6。2。1

v6。2.1

3。查看交换机状态

swd211：admin> switchoshow

rbash: switchoshow: command not found

swd211：admin〉 switchshow

switchName： swd211

switchType: 34。0

switchState： Online

switchMode： Native

switchRole： Principal

switchDomain： 1

switchId： fffc01

switchWwn: 10：00:00：05:1e:02:a2:10

zoning： ON （FC01）

switchBeacon： OFF

Area Port Media Speed State Proto

=====================================

0 0 id N2 Online F—Port 50:08:05：f3：00：1b:4e:91

1 1 id N4 Online F-Port 10:00：00：00：c9:53：b2：8d

2 2 id N4 Online F-Port 10:00:00：00：c9：53：b3:c1

3 3 id N4 Online F—Port 10:00:00：00:c9:53:b3：c2

4 4 id N4 Online F-Port 50:06：0b：00：00:66:00：c4

5 5 id N4 Online F-Port 50:06：0b:00:00：66：01:1e

6 6 id N2 Online F—Port 50:05：08：b3:00:93:b2：81

7 7 —- N4 No_Module

8 8 id N4 Online F—Port 50:01：43:80：04:c7：87:d8

9 9 id N4 Online F-Port 50:01：43：80:04:c7:87：dc

博科BrocadeSAN交换机常用命令

10 10 id N4 Online F—Port 50:01：43：80:06：31：cf：7c

11 11 —— N4 No_Module

12 12 -— N4 No_Module

13 13 —- N4 No_Module

14 14 —- N4 No_Module

15 15 —— N4 No_Module

swd211:admin〉

4.查看交换机license-id

swd211:admin>

swd211:admin> licenseidshow

10：00：00:05：1e:02：a2：10

swd211:admin〉

5。配置ZONE

案例：

1) Create Aliases

〉alicreate “Eng_Host"，“1，0”

>alicreate “Eng_Stor”，“1，4; 1，5”

>alicreate “Mkt_Host”,“Mktwwn”

〉alicreate “Mkt_Stor”，“s3wwn; s4wwn； s5wwn"

2） Create Zones

〉zonecreate “Zone_Eng”，“Eng_Host; Eng_Stor”

〉zonecreate “Zone_Mkt”,“Mkt_Host; Mkt_Stor"

3) Create Configuration

〉cfgcreate “Cfg_EngMkt"，“Zone_Eng; Zone_Mkt"

sw4100:admin〉 cfgshow

Defined configuration:

cfg： Cfg_EngMkt

Zone_Eng； Zone_Mkt

zone： Zone_Eng Eng_Host; Eng_Stor

zone: Zone_Mkt Mkt_Host; Mkt_Stor

alias： Eng_Stor 1，4； 1，5

alias: Eng_Host 1,0

alias： Mkt_Stor 21:00:00:20：37：87：49:29; 21：00：00:20:37:87:e5：20；

21：00:00：20:37：87：20：c5

alias： Mkt_Host 21:00:00：20：37:87：23：e2

Effective configuration：

no configuration in effect

4） Enable Configuration

〉cfgenable “Cfg_EngMkt”

sw4100:admin〉 cfgshow

Defined configuration:

博科BrocadeSAN交换机常用命令

cfg: Cfg_EngMkt

one_Eng; Zone_Mkt

zone: Zone_Eng Eng_Host； Eng_Stor

zone： Zone_Mkt Mkt_Host; Mkt_Stor

alias： Eng_Stor 1,4; 1，5

alias: Eng_Host 1,0

alias: Mkt_Stor 21:00:00：20：37:87:49:29； 21：00:00:20:37：87：e5:20; 21：00:00:20：37:87：20:c5

alias: Mkt_Host 21：00:00：20:37:87：23：e2

Effective configuration:

cfg： Cfg_EngMkt

zone: Zone_Eng 1,0； 1，4; 1，5

zone: Zone_Mkt 21:00:00:20：37:87:23：e2; 21：00:00：20：37：87：e5:20；

21:00:00：20:37：87：49：29； 21：00:00：20：37:87：20:c5

6。查看zone配置文件

swd211：admin>

swd211：admin> cfgshow

Defined configuration：

cfg: FC01 OADB_ML6030； SPC_MSA1000; SFDB_EVA4400； SFDB04_MSA1500;

SFEVA4400_SMA

zone: OADB_ML6030

1,7； 1，14; 1,15

zone: SFDB04_MSA1500

1，10； 1，6

zone： SFDB_EVA4400

1,3； 1,4; 1,5; 1,7; 1,8； 1,9

zone: SFEVA4400_SMA

1,8； 1,9； 1，11

zone: SPC_MSA1000

1，0; 1，1； 1,2； 1，7

Effective configuration：

cfg: FC01

zone： OADB_ML6030

1，7

1,14

1,15

zone： SFDB04_MSA1500

1,10

1，6

zone: SFDB_EVA4400

1,3

1,4

1,5

1,7

博科BrocadeSAN交换机常用命令

1,8

1，9

zone: SFEVA4400_SMA

1,8

1,9

1，11

zone: SPC_MSA1000

1，0

1,1

1,2

1,7

swd211：admin〉

swd211:admin〉

7.查看ZONE

swd211：admin〉 zoneshow

Defined configuration:

cfg： FC01 OADB_ML6030; SPC_MSA1000; SFDB_EVA4400; SFDB04_MSA1500;

SFEVA4400_SMA

zone: OADB_ML6030

1，7； 1，14； 1,15

zone： SFDB04_MSA1500

1，10； 1，6

zone： SFDB_EVA4400

1,3; 1,4; 1，5； 1,7; 1，8; 1,9

zone: SFEVA4400_SMA

1,8； 1,9； 1，11

zone： SPC_MSA1000

1,0; 1,1； 1,2； 1,7

Effective configuration：

cfg: FC01

zone: OADB_ML6030

1,7

1，14

1，15

zone: SFDB04_MSA1500

1,10

1,6

zone： SFDB_EVA4400

1，3

1，4

1，5

1,7

1,8

博科BrocadeSAN交换机常用命令

1，9

zone: SFEVA4400_SMA

1，8

1,9

1，11

zone： SPC_MSA1000

1,0

1，1

1,2

1，7

swd211:admin〉

8。查看系统日志信息

swd211:admin〉 supportshow

日志比较多,建议log出来查看.

9。关机

swd211:admin> sysshutdown

10。设置博科Brocade交换机IP地址

博科交换机的默认IP地址是10.77.77.77，在命令行模式下可以通过ipaddrset命令对交换机的IP地址进行设置和修改

swd77：admin> ipaddrset

Ethernet IP Address ［10.77.77.77］: ＃输入交换机需要设置的IP地址

Ethernet Subnetmask ［255。255.255。0]: #输入掩码

Fibre Channel IP Address [none］:

Fibre Channel Subnetmask [none］：

Gateway IP Address [none］： ＃ 输入网关

DHCP ［Off]:

＃是否开启DHCP

swd77:admin〉

11.博科brocade交换机查看OS版本信息

swd77：admin> version

Kernel： 2.6。14.2 //linux内核版本

Fabric OS: v6.1。0a // 交换机OS版本

Made on： Thu Apr 17 21：45:31 2008 // 生产日期

Flash： Tue Jan 13 23：33：44 2009

BootProm： 4.6.6

swd77:admin>

12.博科brocade交换机添加license授权信息

swd77:admin> licenseadd XXXXXXXX（博科的激活号）

13。查看博科brocade交换机license授权信息

博科BrocadeSAN交换机常用命令

在命令行模式下使用licenseshow命令可以查看博科交换机的授权情况，使用licenseadd命令可以添加授权。

博科Brocade Slikworm 210E交换机授权情况

swd77:admin> licenseshow

RzcQSXXXCS0RTc:

Unknown1 license

S9zXXXCSzRTScl：

Unknown2 license

b9QQGGHJHARRdF：

Fabric license

swd77：admin〉

其中两个Unknown1 和Unknown2这两个授权应该是两个4端口的授权。Fabric license是级联license授权，是我后来添加的，默认的210E交换机是没有的.

14。博科Brocade Slikworm 300交换机license

swd77:admin〉 licenseshow

XSCJBCmH3SARFa7BXrVVBGGFFRRXBArGR:

Fabric license //级联License

Enhanced Group Management license //增强组管理授权

8 Gig FC license //8Gb的授权

swd77:admin〉

15.博科Brocade交换机修改密码命令

Brocade交换机在命令行模式下可以通过passwd命令来修改用户密码：

以brocade 300为例:

swd77：admin> passwd #使用passwd命令修改当前用户密码

Changing password for admin

Enter old password： ＃输入目前使用的密码

Enter new password： ＃输入新密码

Re—type new password： ＃确认新密码

passwd: all authentication tokens updated successfully

Saving password to stable storage.

Password saved to stable storage successfully。

swd77：admin〉

16.博科 brocade SAN交换机密码重置

博科300的默认用户名是admin，默认密码是password。由于这台机器用户做过设置,密码改过了需要重设一下。博科交换机是没有reset按钮的，必须通过console线连接通过命令重置.

博科300的os是用的linux 2。6的核心，最高权限的管理帐号是root。重置交换机密码就是用这个帐号。

swd77 login: root

Password： fibranne

使用该帐号登陆后会出现下面的信息:

Disclaimer for Root and Factory Accounts Usage！

This Fibre Channel switch is equipped with Root and Factory accounts

that are intended for diagnostics and debugging purposes solely by

博科BrocadeSAN交换机常用命令

the Equipment vendor's trained engineers。 Improper use of the

functionality made available through the Root or Factory account could

cause significant harm and disruption to the operation of the SAN fabric.

Your use of the functionality made available through the Root or Factory

account is at your sole risk and you assume all liability resulting from

such use. The Equipment vendor shall have no liability for any losses

or damages arising from or relating to the use of the Root or Factory

account （and the functionality enabled thereby) by anyone other than

the Equipment vendor’s authorized engineers。

Proceeding with the usage of this switch as the Root or Factory user

explicitly indicates your agreement to the terms of this disclaimer。

Please change passwords for switch default accounts now.

Use Control-C to exit or press ’Enter' key to proceed.

这里用Control-C结束就行了,如果回车会让分别设置各个帐号的密码,出现如下信息：

Warning: Access to the Root and Factory accounts may be required for

proper support of the switch. Please ensure the Root and Factory

passwords are documented in a secure location. Recovery of a lost Root

or Factory password will result in fabric downtime。

for user — root

Changing password for root

Enter new password：

Password unchanged.

passwd: Authentication token manipulation error

Please change passwords for switch default accounts now。

for user — factory

Changing password for factory

Enter new password:

Password unchanged。

passwd： Authentication token manipulation error

Please change passwords for switch default accounts now.

for user - admin

Changing password for admin

Enter new password:

Password unchanged。

passwd： Authentication token manipulation error

Please change passwords for switch default accounts now。

for user - user

Changing password for user

Enter new password:

Password unchanged。

passwd: Authentication token manipulation error

17.登陆后是用passwddefault命令恢复出厂密码

swd77:root> passwddefault

Password policies are already set to default.

博科BrocadeSAN交换机常用命令

All account passwords have been successfully set to factory default.

swd77:root〉

18.交换机升级

将Brocade 200E交换机现有微码版本v5。0。1b 升级至v6。2.1,具体操作步骤如下:

1、 资源准备：网线一根,BROCADE 200E firmware version ,控制台（PC或笔记本），要安装Java JRE 1。5版本以上

2、 设备连接：用网线将控制台（PC 或笔记本）的网卡连接到交换机的管理口上。

3、 控制台环境设置：将控制台的网卡IP地址设备为10.77.77.1，子网掩码为255.255.255。0。然后在控制台的安装FTP服务或软件，FTP的根目录设置为版本软件所在的目录，并设置一个用户lab，密码为lab123。

确认控制台与交换机（brocade)的网络连接正常.执行以下命令：

Ping 10.77.77.77 (默认管理口地址)

4、 登陆交换机：输入telnet 10。77.77。77 ,用户名为：admin，密码为:password，登录到交换机。登陆进入后，会提示更改admin帐户的密码,如需更改直接回车，不更改则按ctrl

+ c 。

5、 登录后输入firmwareshow，回车，可以查看现有的微码版本，如果不是v6。2.1，则需要升级到v6。2.1。

Concept

1）. Every Brocade switch has 2 partitions (one is master， the other is slave)。

2）. Switch can be upgrade online

3）. Slave upgrade first, after the slave partition upgraded, slave partition

become master， master become slave, then firmware copy from master to slave

Version Information：

Port Speed Product Firmware Version Upgrade info

2GB 3900 4.x or 5。x v5。2。0a or v5。3.0c

2GB 12000 4.x or 5.x v5.2.0a or v5.3。0c

4GB 42000 4。x or 5.x v5.2.0a or v5。3。0c

NOTICE:

1> when current Version is 4。4。2 or later, Please Online Upgrade。

2〉 Before Upgrade firmware, please backup current configuration.

3> Copy new version firmware packages to ftp server directory.

Upgrade Firmware process （Step by Step)

This is demo switch from Brocade Shanghai office。 Don’t change IP address

please。 If you meeproblem

swd77 login： admin

Password:

swd77:admin〉 version

Kernel: 2.4。19

博科BrocadeSAN交换机常用命令

Fabric OS： v4。4.0d

// Please check current version

Made on: Wed May 18 21：08:14 2007

Flash: Mon Jun 6 06：35：26 2007

BootProm: 4。5.0

swd77:admin> configupload //backup

the switch configuration

Protocol (scp or ftp） ［ftp]： ftp

Server Name or IP Address [host］: 202。134。79.36 //ftp server ip—address

User Name ［user]： lab //ftp server user name

File Name ［]: config。txt // specify configuration file

name

Password:

//ftp server user password

Upload complete

swd77:admin> firmwaredownload //download new version firmware

You can run firmwareDownloadStatus to get the status of this command。

This command will cause the switch to reset and will

require that existing telnet， secure telnet or SSH

sessions be restarted。

Do you want to continue [Y]: y

Server Name or IP Address： 10.77.77.1 //ftp server ip—address

User Name: admin

//ftp server user name

File Name:

/v5。1。0/v5。1.0/

/v5.2.0/v5.2.0/release。plist

/v5。3。0/v5.3。0/

/v6。0.0/v6.0。0/release。plist

/v6。1。0/v6。1.0/release。plist

/v6.2.1/v6.2.1/

Password:

//ftp server user password

注意： 升级需要30分钟的格式化,需要10分钟的备分区同步版本,总共花销时间需:40分钟

［0]： Sun Feb 19 05:59：40 2012 Firmware is being downloaded to the switch. This

step may take up to 30 minutes。

［1］： Sun Feb 19 06：04:35 2012 Firmware has been downloaded to the secondary

partition of the switch。

［2]： Sun Feb 19 06:06：15 2012 The firmware commit operation has started。 This

may take up to 10 minutes。

博科BrocadeSAN交换机常用命令

firmwareshow 检查版本是否主分区与备分区同步

Firmwaredownload has started。

Start to install packages。。。。。.

dir #＃###＃##＃＃#＃####＃＃＃#＃＃#＃#＃＃#＃##＃#＃＃＃##＃#＃##＃#＃＃＃＃＃

ldconfig ＃###＃＃##＃＃＃#＃##＃###＃##＃#＃＃#＃＃＃#＃#＃####＃#＃＃#＃＃##＃##

glibc ＃#＃#＃#＃#＃#＃##＃####＃#＃###＃＃#＃＃#＃###＃#＃#＃＃##＃##＃＃#＃#

bash ##＃###＃＃##＃###＃####＃＃#＃＃#＃#＃#＃#＃#####＃＃##＃＃#＃＃#＃＃＃

readline ＃＃#＃＃＃##＃＃＃＃##＃＃＃#＃＃#＃#####＃＃＃＃＃#＃##＃＃＃＃##＃#＃＃####

terminfo ＃#＃＃##＃#＃＃＃＃＃＃#＃#####＃＃＃#＃#＃#＃#＃#＃#＃#＃＃##＃＃##＃＃#＃＃

termcap #＃##＃##＃####＃＃＃＃#＃＃##＃#＃＃＃＃＃＃＃＃#＃##＃＃#＃###＃＃#＃＃＃##

setup ＃##＃#＃####＃＃＃##＃###＃＃####＃###＃＃###＃＃#＃#＃##＃＃＃＃#＃＃#

swbd12-setup ＃＃＃＃＃＃###＃＃＃########＃＃#＃#＃#＃＃＃＃#＃#＃＃＃＃#＃＃＃########

which #＃＃＃###＃＃##＃#＃#＃＃＃#＃＃＃＃＃＃#＃＃＃＃###＃＃＃##＃##＃＃＃＃＃＃＃＃#

findutils ＃＃##＃#＃＃＃＃##＃＃＃#＃##＃##＃###＃＃#＃＃＃＃＃＃＃#＃#＃####＃#＃#＃#

bzip #＃#＃###＃###＃########＃###＃＃＃##＃＃＃###＃###＃#＃#＃＃#＃＃#＃

zlib ＃#####＃＃＃＃＃＃＃#＃＃＃#＃＃＃＃＃##＃####＃#＃＃#＃＃#####＃＃#＃＃#＃＃

chkconfig ###＃＃#＃＃＃＃＃＃##＃###＃＃#＃####＃##＃＃＃＃###＃###＃＃#＃＃＃##＃#

fileutils ##＃＃＃#＃##＃＃#＃＃##＃＃#＃＃#＃####＃##＃#＃＃＃＃##＃#＃##＃＃＃####

sed #####＃#＃####＃#＃＃＃#＃＃＃##＃#＃＃＃#＃＃＃＃###＃###＃＃＃＃##＃##＃

textutils #＃＃＃####＃＃＃#＃##＃###＃###＃＃###＃＃＃＃##＃#＃＃＃＃＃#＃#＃##＃##

procps ＃#＃＃#＃＃＃#＃＃####＃#＃＃##＃###＃＃#####＃#＃＃#＃##＃＃#＃##＃＃##

博科BrocadeSAN交换机常用命令

psmisc ＃＃##＃＃#＃#＃#＃＃＃＃#＃＃##＃#＃＃＃＃#＃###＃#####＃#＃###＃＃＃＃＃＃＃

modutils #＃#＃##＃##＃#＃＃#＃＃####＃#＃＃＃##＃###＃＃##＃###＃#＃#＃＃＃＃＃＃＃

sin #＃＃＃##＃＃＃#＃##＃＃##＃＃＃#＃####＃＃＃＃＃＃#＃＃＃＃＃#＃＃#＃＃##＃＃##

rcinit ##＃#＃＃＃####＃#＃####＃＃＃####＃#＃＃＃#＃＃＃＃＃＃#＃##＃#＃#＃#＃＃#

misc #＃＃####＃＃＃###＃＃#＃#＃＃#＃＃＃＃＃#＃#＃＃＃＃##＃#＃＃＃＃#＃##＃＃#＃＃

pam #＃＃#＃＃＃###＃＃#＃##＃#＃＃＃＃#####＃＃＃####＃#####＃#＃＃＃#＃＃##

util—linux ＃＃#＃#＃#####＃###＃#＃＃##＃#＃##＃＃###＃###＃＃###＃＃#＃＃＃##＃＃

sh—utils #＃#＃#＃###＃#＃#＃＃##＃＃##＃＃＃＃######＃#＃#＃####＃#＃＃＃＃##＃#

popt ＃＃＃＃＃＃###＃#＃##＃＃##＃###＃＃#＃#＃#########＃＃#####＃###＃＃

grep ＃#＃＃######＃＃#＃###＃######＃＃#＃＃##＃＃####＃＃####＃＃＃####

rpm ###＃＃####＃＃＃＃＃＃＃＃#＃##＃##＃#＃###＃####＃##＃####＃＃＃＃＃＃＃

sysvinit ＃#＃#＃＃#＃＃#＃＃＃#＃###＃＃##＃##＃＃＃###＃＃＃##＃＃####＃＃＃＃＃＃＃#

man ＃＃＃＃#####＃＃####＃＃#＃＃#＃＃####＃＃##＃###＃＃＃#＃＃##＃#＃#＃#＃

less ###＃#######＃##＃#＃＃＃####＃＃＃＃###＃＃＃＃＃###＃##＃#＃＃#＃#＃＃

gzip ###＃＃＃＃#＃＃＃##＃###＃##＃#＃＃##＃#＃#＃#＃##＃＃##＃##＃#####＃＃

tar ＃##＃#＃#＃###＃##＃##＃＃＃##＃###＃＃＃#＃##＃###＃＃＃#＃#＃###＃##

rsync ##＃#＃##＃＃#＃#＃＃＃＃＃##＃#＃＃＃#＃###＃＃#####＃＃＃＃＃###＃#＃###

cpio ＃＃＃#＃######＃＃##＃###＃＃###＃＃＃###＃#＃＃＃＃＃＃＃##＃＃＃###＃＃＃

dev ＃###＃＃##＃＃###＃＃#＃＃###＃＃＃#＃＃＃＃＃#＃＃#####＃＃＃##＃##＃＃＃＃

swbd23—bootenv ＃##＃＃＃＃#####＃#＃＃＃#＃＃＃＃###＃＃＃#＃＃＃＃#＃#＃#＃####＃#＃#＃＃＃

wdtd ＃＃＃###＃＃######＃#＃＃＃＃#＃#＃#＃＃＃＃##＃＃#＃#＃#＃#＃##＃#＃#＃＃＃

wget ＃＃＃＃＃##＃＃#＃＃#＃#＃#＃###＃#＃＃＃＃####＃＃#＃##＃#####＃＃＃＃＃＃#

博科BrocadeSAN交换机常用命令

fwdl #＃#＃＃＃＃＃＃＃＃＃＃#＃####＃##＃＃＃#####＃＃#＃＃#＃＃＃##########＃

swbd23—prom ＃###＃#＃＃＃#＃#＃＃＃#＃#＃##＃####＃＃###＃＃######＃＃＃#＃#####＃

Please avoid powering off the system during prom update.

kernel ＃＃＃#＃##＃＃#＃＃##＃#＃＃#＃＃#＃＃＃＃＃#＃＃＃＃#＃#＃#＃＃#＃＃＃＃＃#＃＃＃#

swbd21-drivers ＃＃#####＃##＃＃#＃＃＃####＃##＃##＃#＃＃####＃#＃####＃＃#＃#＃＃#＃

pcmcia—cs ##＃#＃＃＃＃#＃#＃#＃#＃###＃＃＃###＃#＃##＃#＃#＃##＃#＃##＃####＃##

sysklogd #＃#＃##＃＃＃##＃#＃###＃＃########＃#####＃＃＃＃#＃######＃＃#＃＃

Write kernel image into flash。

..。...。.。...。...。.。.。..。。..。。。

Verification SUCCEEDED

Removing unneeded files, please wait 。..

Finished removing unneeded files.

All packages have been downloaded successfully。

Firmwaredownload has completed successfully。

HA Rebooting 。.。 // waiting for upgrade another

controller

Fabric OS (swd77）

Firmwaredownload command has completed successfully.

swd77:admin〉 firmwareshow //check firmware version for all

controller

Primary partition: v4.4。2

Secondary Partition： v4。4.2

swd77：admin〉

－End－

19。帮助信息

swd211：admin〉 help

aaaconfig Configure RADIUS for AAA services

ad Specifies all administration domain （AD)—level

operations

ag Configure the Access Gateway feature

agshow Displays the Access Gateway information registered

with the fabric

agtcfgdefault Reset SNMP agent to factory default

aliadd Add a member to a zone alias

博科BrocadeSAN交换机常用命令

alicreate Create a zone alias

alidelete Delete a zone alias

aliremove Remove a member from a zone alias

alishow Print zone alias information

aptpolicy Get and set Advanced Performance Tuning policy

auditcfg Modifies and displays audit log filter

configuration。

auditdump Display audit log

authutil Get and set authentication configuration

backplanetest Backplane connection test for multi—blade systems。

backport Test for back-end ASIC pair to ASIC pair linksbannerset Set security bannerbannershow Display security bannerbcastshow Display broadcast routing informationbladedisable Disables all user ports on a bladebladeenable Enables all User Ports on a blade. bpportloopbacktest Functional test of port via blade processor oramtest MBIST test for AP blade BP ASICsburninerrclear Clear errors that are stored in the non-volatile

storageburninerrshow Display errors that are stored in the non-volatile

storageburninstatus Display the diagnostics burnin t Verify QuickLoop's Content Addressable Memory

(CAMcentralmemorytest Test ASIC central memory vshow Display Effective zone configuration informationcfgadd Add a member to a configurationcfgclear Clear all zone configurationscfgcreate Create a zone configurationcfgdelete Delete a zone configurationcfgdisable Disable a zone configurationcfgenable Enable a zone configurationcfgmcdtmode Configure legacy MCDT zoning behaviorcfgremove Remove a member from a configurationcfgsave Save zone configurations in flashcfgsaveactivetodefined Moves the effective configuration to the defined

configurationcfgshow Print zone configuration informationcfgsize Print size details of zone databasecfgtransabort Abort zone configuration transactioncfgtransshow Print zone configurations in transaction bufferchassisbeacon Set chassis beacon on or offchassisconfig Display or set the chassis configurationchassisdisable Disable all ports in chassis。

。

）.SID translation

博科BrocadeSAN交换机常用命令

chassisenable Enable all ports in chassis

chassisname Display or set the chassis's Name

chassisshow Display all Field Replaceable Units (FRU）

chipregshow Displays the port registers for a given chip

number。

clihistory Displays a log of most recently executed CLI

commands

cmemretentiontest Data retention test of the central memory SRAMs.

cmitest Verify CMI bus between ASICs.

configdefault Reset config to factory default

configdownload Load switch config from a serverconfiglist List the stored config filesconfigremove Remove a stored config fileconfigshow Print switch config parametersconfigupload Save switch config to a serverconfigure Set logical switch config parametersconfigurechassis Set chassis config parameterscryptocfg Configure encryption node functionsdatatypeshow Display available diagnostic data Print/set the system date and timedbgshow Display debug levels of various modulesdefzone Activates or deactivates a default zone

configuration. diagclearerror Clears diagnostics failure mmandshow Display diagnostic command sablepost Disable diagnostic ablepost Enable diagnostic lp Display diagnostic command opid Select the diagnostics loop deshow Displays diagnostic mode configurationdiagpost Displays the contents of port registers and

memoriesdiagretry Sets diagnostic retry modediagsetcycle Set diagnostic script parametersdiagsetesdmode Set or display ESD tshowtime Set or display diagnostic showdiagshow Display diagnostic statusdiagshowtime Set or display diagnostic showdiagstatus Display currently running diagnostic bute Distributes data to switches in a et Turn off the dynamic load sharing (DLS) optiondlsset Turn on the dynamic load sharing

dlsshow Display the state of the dynamic load sharing

optiondnsconfig Configure DNS service

。

。

。

—time mode。

。

—time mode。

（DLS) option

博科BrocadeSAN交换机常用命令

enclosureshow Display the switch enclosure attributes

errclear Clear error log

errdelimiterset Sets the error log start and end delimiter for

messages sent to the console and syslog

errdump Print error log （no page breaks)

errfilterset Sets a filter for an error log destination

errmoduleshow Displays all the defined modules in the system

errshow Print error log

fabportshow Display contents of a particular port’s data

fabretryshow Display retry count of various fabric commands

fabriclog Displays or manipulates the fabric logfabricprincipal Configure Principal Switch Selection modefabricshow Print fabric membership infofabstateclear Clears the fabric state informationfabstateresize Changes the number of state entriesfabstateshow Displays the fabric state informationfabstatsshow Displays the fabric statistics informationfabswitchshow Display fabric switch state information fandisable Disables a fan unitfanenable Enables a fan unitfanshow Print fan statusfastboot Reboot this switch and bypass POSTfastwritecfg Configure FC fastwrite featurefcipchiptest Functional Test of Components in FCIP Complexfciphelp Print FCIP help infofcippathtest Data Path Test of the FCIP Sends a FC ELS ECHO request to a portfcplogclear Clear the FCP logfcplogdisable Disable logging of FCP eventsfcplogenable Enable logging of FCP eventsfcplogshow Display FCP probing log informationfcpprobeshow Display FCP probing informationfcprlsshow Display FCP RLS

fcrbcastconfig Configure interfabric broadcast frame forwardingfcrchiptest Functional Test of FCR figure Sets FC Router configuration ricshow Displays FC Routers on a backbone n Configure LSAN policiesfcrlsancount Display maximum LSAN zone limitfcrlsanmatrix Manage LSAN fabric matrix configurationfcrpathtest Data Path Test on Connection between FCR FPGA and

Central ASICfcrphydevshow Displays FC Router physical device xyconfig Displays or configures proxy devices presented by

an FC Router

。

。

。

（read link state） information

。

。

。

。

博科BrocadeSAN交换机常用命令

fcrproxydevshow Displays FC Router proxy device information。

fcrresourceshow Displays FC Router physical resource usage。

fcrrouterportcost Modify FC Router port cost configuration。

fcrrouteshow Displays FC Router route information.

fcrxlateconfig Displays or persistently configures a translate

（xlate) domain's domain ID for both

EX_Port-attached fabric and backbone fabric.

fddcfg fddcfg manages the fabric data distribution

configuration parameters.

fdmicacheshow Display abbreviated remote FDMI device information

according to remote domain IDfdmishow Display detailed FDMI device informationficonclear Clears contents of the specified FICON management

databaseficoncupset Sets FICONficoncupshow Displays FICON-CUP parameters for a switchficonhelp Displays FICON commandsficonshow Displays contents of the specified FICON management databasefiltertest Run frame filter test for bloom ASICs. fipscfg Configure FIPS mode operationfirmwarecommit Commit firmware to stable storagefirmwaredownload Download firmware into switchfirmwaredownloadstatus Display the progress and status of firmwareDownloadfirmwarekeyshow Manage the keys used to check firmware signaturesfirmwarekeyupdate Manage the keys used to check firmware signaturesfirmwarerestore Restore the old firmware in the switchfirmwareshow Display firmware versions in the switchfosconfig Enable/disable FabOS servicesfosexec Invoke command in alternate VF contextfporttest Functional test of F-framerpathtest Tests data path between ASICsfrureplace Replace a Field Replacable Unitfspfshow Print FSPF global informationfwalarmsfilterset Configure alarms filtering for Fabric Watchfwalarmsfiltershow Show alarms filtering for Fabric Watchfwclassinit Initialize all Fabric Watch classesfwconfigreload Reload Fabric Watch configurationfwconfigure Configure Fabric Watchfwfrucfg Configure FRU state and notificationfwhelp Print Fabric Watch help infofwmailcfg Configure Fabric Watch Email Alertfwportdetailshow Create a report with detailed port informationfwsamshow Show availability monitor informationfwset Set port persistence time

—CUP parameters for a switch

〉N N—〉F point to point path.

博科BrocadeSAN交换机常用命令

fwsettocustom Set boundary & alarm level to custom

fwsettodefault Set boundary ＆ alarm level to default

fwshow Show thresholds monitored and port persistence time

grep Linux grep command

h Print shell history

hadisable Disables the High Availability feature in the

switch.

hadump Displays information about the status of the High

Availability feature in the switch.

haenable Enables the High Availability feature in the switch

hafailover Forces the failover mechanism so that the Standby

Control Processor (CP)becomes the Active Displays control processor (CP) statushasyncstart Enables HA state stop Disables the HA state Print this listhistorylastshow Displays last history recordhistorymode Display or set the mode of the history loghistoryshow Displays entire history log httpcfgshow Used to show the version of the Java plug by the Webtoolsi Display process summaryiclcfg Configure ICL stateifmodeset Set the link operating mode for a network interfaceifmodeshow Display the link operating mode for a network

interfaceinterfaceshow Display the FSPF (TM) interface informationinteropmode Displays/enables/disables Brocade switch

interoperability with switches from other

manufacturersioddelayreset Configure in-orderioddelayshow Configure in-orderiodreset Turn off the in-order delivery

iodset Manage the iniodshow Display the state of the in-order delivery optionipaddrset Set ethernet and FC IP addressesipaddrshow Print ethernet and FC IP addressesipfilter Manage/display IP filtersipsecconfig Configure IPSec featureiscsihelp Print iSCSI help infoislshow Display the current connections and statuskilltelnet Terminate telnet/serial login sessions

interactivelyldapcfg Configure LDAP role mappingledtest Cycle system LEDs.

—in used

—delivery （IOD) delay parameter

—delivery （IOD) delay parameter

（IOD) option

—order delivery （IOD) option

博科BrocadeSAN交换机常用命令

lfcfg Configure logical fabrics

lfexec Invoke command in alternate VF context

licenseadd Adds license keys to switch

licensehelp Print license help info

licenseidshow Displays the system license ID

licenseport Configure per-port POD license assignments

licenseremove Removes a license key from this system

licenseshow Displays current license keys

linkcost Set or print the FSPF cost of a link

login Login as a new user

logout Logout from remote sessionloopporttest Functional test of L-port M->M path on a Configure logical switcheslsdbshow Displays the FSPF link state databasememshow Display memory usage in the ropshow Displays ASIC pair properties. more Linux more commandmscapabilityshow Display Management Server Capabilitymsconfigure Configure Management Servermsplatshow Display the Management Server Platform Databasemsplatshowdbcb Display the Management Server Database Control

Blockmsplcleardb Clear the Management Server Platform Database

fabricmsplmgmtactivate Activate the Management Server Platform Database

fabricmsplmgmtdeactivate Deactivate the Management Server Platform Database

fabricmstddisable Disables the Management Server Topology Discovery

Management Servicemstdenable Enables the Management Server Topology Discovery

Management Servicemstdreadconfig Display status of Management Server Topology

Discovery Servicemyid Display the current login session detailsnbrstateshow Display FSPF (TM) neighbors’ statenbrstatsclear Reset the FSPF (TMnetstat Display network connections and statisticsnodefind Display all the devices' PID matching the given

world wide namensaliasshow Display local Name Server information with Aliasesnsallshow Print global Name Server informationnscamshow Print local Name Server Cache informationnsshow Print local Name Server information informationnszonemember Display the information of all the online devices

。

—wide

—wide

—wide

s

） interface counters

博科BrocadeSAN交换机常用命令

which are zoned with the given device。

opensource Display information on open source software

utilized in FabOS

passwd Set usernames and passwords

passwdcfg passwdcfg manages the password policies。

pathinfo Display routing information between two ports

pdshow Show information from Panic Dump file

perfaddeemonitor Add end-to—end monitor

perfaddipmonitor Add monitor for IP trafic frame count

perfaddreadmonitor Add filter-based monitor - SCSI Read

perfaddrwmonitor Add monitor - SCSI Read and Writeperfaddscsimonitor Add monitor for SCSI frame countperfaddusermonitor Add filterperfaddwritemonitor Add filterperfcfgclear Clear Performance settings from FLASHperfcfgrestore Restore Performance configuration from FLASHperfcfgsave Save Performance configuration to FLASHperfclearalpacrc Clears the CRC error count associated with a port

and Arbitrated Loop Physical Address (AL_PAperfcleareemonitor Clears statistics counters of one or more

endperfclearfiltermonitor Clears counters of one or more filter performance monitorsperfdeleemonitor Delete endperfdelfiltermonitor Delete filterperfhelp Print Performance Monitoring help infoperfmonitorclear Clear endperfmonitorshow Show endperfsetporteemask Set overall mask for end-toperfshowalpacrc Get ALPA CRC count by port and ALPAperfshoweemonitor Show userperfshowfiltermonitor Show filterperfshowporteemask Show the current end-to-end maskperfttmon Configure bandwidth usage monitorping Display the link operating mode for a network

interfaceping6 Display the link operating mode for a network

interfacepkicreate Creates public key infrastructure

pkiremove Removes existing public key infrastructure (PKI)

objectspkishow Displays existing public key infrastructure (PKI objectspolicy Configure IPSec encryption and authentication

algorithms

—based monitor

—based monitor — SCSI Write

）.

—to—end performance monitors.

—based

。

—to-end monitor

—based monitor

—to—end/filter—based/ISL monitors

—to-end/filter-based/ISL monitors

—end monitors

—defined end—to—end monitors

—based monitors

（PKI) objects

）

博科BrocadeSAN交换机常用命令

portaddress Configure low 16 bits of Fibre Channel Porrt ID

portalpashow Show the ALPAs of a port

portbuffershow Print the buffer allocations for the ports of a

quad

portcamshow Display filter utilization

portcfg Create/Delete a new ip interface/route/arp entry on

the GigE port

portcfgalpa Set AL_PA to 0x0 （default) or 0x13

portcfgautodisable Configure auto disable

portcfgcreditrecovery Configure credit recovery

portcfgdefault Restore the port configuration to defaultsportcfgeport Enable/Disable a port from becoming E_Portportcfgexport Sets a port to be an EX_Port and sets and displays

EX_Port configuration acon Configure a port to do port beaconportcfgfillword Configure a port to a particular fill wordportcfgfportbuffers Configure F_Port buffersportcfggport Lock a port as a G_Portportcfgislmode Configure a port to be ISL R_RDY Mode

enabled/disabledportcfglongdistance Configure a Long Distance Portportcfglosstov Configure frontend port signal debounceportcfglport Lock a port as a L_Portportcfgnpivport Enables and disables NPIV functionality on a gnport Enable/disable N_Port capability for a portportcfgpersistentdisable Persistently disable a portportcfgpersistentenable Enable a persistently disabled portportcfgqos Configure QoS featureportcfgshow Displays port configuration gspeed Configure a port to a particular speed levelportcfgtrunkport Configure a port for trunkingportcfgvexport Sets a port to be an VEX_Port connected to FC-IP

and sets and displays VEX_Port configuration

parametersportcmd Execute commands

portdebug Set debug level and verbosity level of port modulesportdisable Disable a specified portportenable Enable a specified portporterrshow Print port error summaryportflagsshow Display the port status bitmaps of all ports in a

switchportledtest Cycle user port gclear Clear port activity logportlogconfigshow Display portlog configurationportlogdisable Disable portlog facility

。

（ping etc) on the GigE port

博科BrocadeSAN交换机常用命令

portlogdump Print port log （no page breaks)

portlogdumpport Print port log (no page breaks）

portlogenable Enables port log facility

portlogeventshow Display information about port log events

portloginshow Display port login information

portlogpdisc Set or clear the debug_pdisc_flag

portlogreset Enable portlog facility

portlogresize Resize the port log

portlogshow Print port activity log

portlogshowport Print port activity log

portlogtypedisable Disable port loggingportlogtypeenable Enable port loggingportloopbacktest Functional test of port N-portmirror Set a port’s configuration to be disabled or

enabledportname Assign or display the name associated with a portportperfshow Print port throughput numbersportregtest Write/read test of the ASIC SRAMs portregtestportrouteshow Display various routing tables for a portportshow Show configured ip interfaces/routes/arp entries on the GigE Portportstats64show Display the 64-bit hardware statistics for a portportstatsclear Clear the status of a specified switch portportstatsshow Print hardware statisticsportswap Swaps area numbersportswapdisable Disable portswap featureportswapenable Enable portswap featureportswapshow Display port and area informationporttest Functional test on a live fabricporttestshow Retreive information from unkarea Configure area trunkingportzoneshow Displays the enforced zone type of the F/FL of a switchpowerofflistset sets slot power off list orderpowerofflistshow Displays slot powerpsshow Print power supply statusquietmode Displays/enables/disables quietmode on telnet

sessionreboot Reboot this processorroutehelp Print routing help infosaschiptest Functional Test of Components in SAS Complexsaspathtest Data Path Test of the SAS ivesize Displays size of the active (security) databasesecauthsecret Creates/Manages DHCHAP secret key detailsseccertutil Creates/Manages/Displays third party PKI

〉N path。

。

。 Starts porttest.

—ports

。

—off order。

。

博科BrocadeSAN交换机常用命令

certificates

secdefinesize Displays size of the defined （security) database

secglobalshow Displays current internal security state

information

sechelp Displays information about security commands

secpolicyabort Aborts changes to defined policy

secpolicyactivate Activates all policy sets

secpolicyadd Adds members to an existing policy

secpolicycreate Creates a new policy

secpolicydelete Deletes an existing policy

secpolicydump Displays all members of existing policiessecpolicyfcsmove Moves a member in the FCS policysecpolicyremove Removes members from an existing policysecpolicysave Saves defined policy set and sends to all switchessecpolicyshow Shows members of one or more policiessecstatsreset Resets security statisticssecstatsshow Displays security statisticssensorshow Display sensor readingssetdbg Set debug level of the specified modulesetesdmode Set or display ESD modesetmfgmode Set or display diagnostic MFG modesetmodem Enables or disables modem login to a control

processor (CPsetsplbmode Set or display SPLB modesetverbose Set verbosity level of the specified modulesfpshow Print Serial ID SFP informationshellflowcontroldisable Disable xon-xoff flow control on console serial

portshellflowcontrolenable Enable xonslotpoweroff Removes power from a weron Restores power to a ow Displays the status of all slots in the systemsltest Serial link test of port Nsnmpconfig Configure SNMPsnmpmibcapset Set options for configuring SNMP Mib/Trap

Capabilitysnmpmibcapshow Show SNMP Mib/Trap Configurationspinfab Functional test of switch to switch ISL cabling and trunk group tter linespinsilk Functional test of internal and external transmit

and receive paths at full speedsramretentiontest Data retention test of the miscellaneous SRAMs in

ASICsshutil Configure SSH authentication options

。

。

）

。

—xoff flow control on console serial port

。

—>N path.

—speed jitter measurement

。

博科BrocadeSAN交换机常用命令

statsclear Clear port and diagnostic statistics。

statstest Statistics counter test for the ASICs.

stopporttest Terminate the running porttest。

supportffdc Modifies or displays first—failure data capture

（FFDC) configuration。

supportftp set support Ftp parameters

supportsave retrieve support data from switch to host

supportshow Prints switch information for debugging purposes.

supportshowcfgdisable Disables a group of commands under supportshow

command.

supportshowcfgenable Enables a group of commands under supportshow

command。

supportshowcfgshow Displays the groups of commands enabled for

display. by the supportshow command.

switchbeacon Set switch beacon on or off

switchcfgpersistentdisable Persistently disable a switch

switchcfgpersistentenable Enable a persistently disabled switch

switchcfgspeed Configures all ports of the switch to a particular

speed level

switchcfgtrunk Configure all ports on the switch for trunking

switchdisable Disable this switch

switchenable Enable this switch

switchname Print/set this switch's name

switchshow Print switch and port status

switchstatuspolicyset Set policy parameters for overall switch status

switchstatuspolicyshow Print policy parameters for overall switch status

switchstatusshow Print overall switch status

switchuptime Display the amount of time for which the switch is

up

switchviolation Display policy violations recorded in RAS log

syslogdfacility Change the syslog facility

syslogdipadd Add syslog daemon IP address

syslogdipremove Remove syslog daemon IP address

syslogdipshow Print the syslog daemon targets

sysshutdown Provides a graceful shutdown to protect the switch

file systems。

systemverification Run a suit of diagnostic tests on all switches in a

system。

tempshow Print temperature readings

timeout Set/show the IDLE timeout value for a login session

topologyshow Display the unicast fabric topology

tracedump generate/remove trace dump or display trace dump

status

traceftp enable/disable trace auto-FTP or transfer trace

dump

博科BrocadeSAN交换机常用命令

trackchangeshelp Print Track Changes help info

trackchangesset Configure alert for login/logout/config update

trackchangesshow Displays status of track changes

trunkdebug Debug a trunk link failure

trunkshow Display trunking information

tsclockserver Displays or sets the NTP server address

tstimezone Displays or sets the time zone

turboramtest Turbo SRAM test for bloom ASICs。

txdpath Functional test of ASIC pair TXA TXD connections。

uptime Print how long switch has been up

urouteconfig Configure a static route

urouteremove Remove a static route

urouteshow Display unicast routing information

usbstorage Manage USB storage device （available on Brocade

Data Center Director only）。

userconfig Display or configure user accounts

userrename Rename user login name

version Print firmware version

wwn Display or set the world wide name

zone Configure zone objects

zoneadd Add a member to a zone

zonecreate Create a zone

zonedelete Delete a zone

zonehelp Print zoning help info

zoneobjectcopy Copies a zone object

zoneobjectexpunge Expunges a zone object

zoneobjectrename Rename a zoning Object

zoneremove Remove a member from a zone

zoneshow Print zone information

博科BrocadeSAN交换机常用命令