admin 管理员组文章数量: 887021
2024年3月21日发(作者：table or view does not exist)
解决在VMware虚拟机系统中安装hyper
解决在VMware虚拟机系统中安装hyper-V
(2012-12-21 04:55:38)
标签：
虚拟化
hyper-v
vm
it
So, following are the steps to create a Microsoft Hyper-V VM running in VMware Workstation 8, but later I’ll show you how to do it
in ESXi 5 as well:
1. Create a New VM with version 8 hardware
2. Give it 4 GB RAM and 2 x vCPUs with about 80-100 GB disk space, depending upon how many VMs you wanted nested
underneath Hyper-V.
3. The instructions lead you to believe that you should pick a VMware ESX option as the STOP! DON’T! Select
Windows 2008 R2 x6
4.
4. When you are finished, make sure you add another NIC to the VM used as the Hyper-V virtual network,
5. Under the settings of the VM > CPU, make sure you have the option to pass-through the Intel VT-x/EPT feature.
6. Make sure you have set the VM to boot from Windows 2008 R2 x64 media ISO.
7. Before booting, you should edit the config file .vmx and add the parameter: .v0 = “FALS E”
8. Now Boot and Install Windows 2008 R2 x64.
9. Once finished, open up Server Manager and click ―Add Role‖.
10. Select and install the Hyper-V option. At this point, you will know if your system is working correctly and passing the Intel EPT
feature, because if it doesn’t, you won’t be able to go past this point.
11. You’ll also have to select the network adapter used for the virtual network.
12. Now install Hyper-V, which will need a reboot.
13. After it is completed, open Server Manager drill down to Hyper-V and connect to the local server.
14. Now create and install a virtual machine.
Once done, you should be able to use it as normal, albeit slow.
Nesting Hyper-VM running E S Xi 5
Now, doing the same thing on ESXi 5 is a little trickier although some of the steps are the same.
1. Before anything you need to place an entry in the /etc/vmware/config file found in the tech support mode on your ESXi 5. I
enabled SSH through the security profile in the vSphere Client. Then used putty SSH into the ESXi system.
2. From there I executed the following command which is needed to allow nested hypervisors :
# echo ' = "TRUE" ' >> /etc/vmware/config
Notice the use of single and double quotes in the command-line
3. Now create a virtual machine using version 8 hardware, 4GB (or as much as you can spare), 2 x vCPUs, 2 or more vNICs and
a 100GB virtual disk.
4. Before booting up the VM and installing Hyper-V we need to add two lines the virtual machines config file .vmx
You can try this through the vSphere Client in the settings of the virtual machine > Configuration Parameters, whereas I had
better luck doing it from command-line
版权声明：本文标题：解决在VMware虚拟机系统中安装hyper 内容由网友自发贡献，该文观点仅代表作者本人， 转载请联系作者并注明出处：http://www.freenas.com.cn/free/1711010558h586246.html， 本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容，一经查实，本站将立刻删除。
发表评论