德国软管标准(DIN hose standards)

德国软管标准(DIN hose standards)ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC英文名称Food industry fittings;食品工业用管配hose unions ofDIN 11854-件.不锈钢制软管.stainless steel;1991带螺纹的软管接头threaded hose和软管锥形接头couplings, conical hosecouplingsLaboratory glassware;玻璃实验仪器.软glass tube ends forDIN 12215-管连接用玻璃管hose connections,1975端.橄榄形和毛细olives, capillary tube管端endsDIN 12865-实验室仪器.橡胶Laboratory apparatus;1973管rubber tubingAluminium alloy cap标称压力为16、压fire hose coupling typeDIN 14312-力吸水用消防软管B, for pressure and1985B型铝合金联接器suction purposes;nominal pressure 16Aluminium alloyS 28 消防软管用标delivery coupling typeDIN 14330-称压力PN16 C型C; nominal pressure1-1985铝合金联轴器16, used for fire hosesS 28Aluminium alloyS 38 消防软管用标delivery coupling typeDIN 14330-称压力PN16 C型C; nominal pressure2-1985铝合金联轴器16, used for fire hosesS 32编号中文名称

Delivery coupling,急救S形橡胶管Ctype C, for first aid型输液联接器.第3DIN 14330-rubber hoses S; bind-部分:C-S 28型和C-3-1978apparatus for deliveryS 32型输液联接器coupling type C-S 28用连接装置and C-S 32Aluminium alloy输送管路的C型铝delivery coupling typeDIN 14332-合联接器.公称压C; nominal pressure1986力16 .用于 C42 消16; used for fire hoses防软管C 42Delivery valve与干式灭火上升总installations connectedDIN 14461-管道连接的输送阀with dry rising fire5-1984装置.PN16救火软mains; fire hose valve管阀PN 16Water conduit for fireextinguishing -灭火用引水管.灭Planning andDIN 14462火软管系统和引水installation of fire hoseBerichtigung管道的规划和安systems and water1-2007装.DIN 14462-2007conduit for fire勘误表extinguishing,Corrigenda to DIN14462:2007-01Water systems for fire消防灭火用给水系extinguishing - FillingDIN 14463-统.遥控注水和泄and draining devices1-2007水装置.第1部分:消operated by remote防软管的卷取系统control - Part 1: Forhose reel systemsExhaust gas metal排气金属软管用排DIN 14572-hoses and couplings气金属软管和联轴2002for exhaust gas metal器hosesPick up hose for灭火剂用吸收软

DIN 14819-管.要求.检验方1982法、处理消防水龙管桥架.DIN 14820-第1部分:木制消防1-2000软管桥架消防设备.输水软管运输用笼筐.第1DIN 14827-部分:B、C和D型1-2005输水软管运输用笼筐DIN 14828-绳索软管架2004extinguishing agents;requirements, testmethods, treatmentBridges for fire hoses -Part 1: Bridges for firehoses of woodFire fightingequipment - Cages fortransport of deliveryhoses - Part 1: Cagesfor transport ofdelivery hoses type B,C and DRope hose holdersPolyethylene (PE)灌溉系统用可卷绕coiling pipes and hoses聚乙烯(PE)管道和for irrigation systems -DIN 19658-软管.第2部分:形状Part 2: Hoses with2-1994固定的织物芯层软fabric inlay, rigid管.尺寸和供货技form; dimensions and术条件technical deliveryconditionsPolyethylene (PE)coiling pipes and hoses灌溉系统用可盘绕for use in irrigation聚乙烯(PE)管和软systems; hoses ofDIN 19658-管.带织物内层的nonrigid material with3-1988非刚性材料软管.woven fabric inner第3部分:尺寸和供layer; dimensions and货技术条件technical deliveryconditionsTextile-reinforced织物增强软管.第1DIN 20018-hoses - Part 1:部分:最大工作压1-2003Maximal working力PN 10/16pressure PN 10/16

DIN 20018-织物增强软管.第2Textile-reinforced部分:最大工作压hoses - Part 2:2-2003力PN 40Maximal workingpressure PN 40Textile-reinforced织物增强软管.第3DIN 20018-hoses - Part 3:部分:最大工作压3-2003Maximal working力PN 100pressure PN 100DIN 20018-织物增强软管.第4Textile-reinforced4-2003部分:试验hoses - Part 4: TestingFluid-systems - Hoses液压系统.带衬里with layer -DIN 20021-的软管.DIN ENCompletation for DIN1997853至DIN EN 857EN 853 to DIN EN的补充件857DIN 20029-软管管接头.1:3 锥Hose fittings; 1:3 taper1990度量规gaugesHose fittings; straight-软管连接件.带柄DIN 20030-way-cock with grip;的直旋塞.尺寸、1992dimensions, materials,材料和要求requirementsHose fittings; taperedDIN 20033-软管连接件.带压nozzle with clamping1990紧螺母的锥形管嘴nutHose fittings; flangeDIN 20035-软管管接头.法兰nozzle; nominal1990管嘴.公称压力16pressure 16Hose fittings; couplingDIN 20036-软管管接头.圆螺nipples with round1990纹的管接头套管thread formHose fittings;DIN 20037-软管管接头.连接connecting nipple;1990套管.尺寸dimensionsDIN 20038-软管管接头.接头Hose fittings; coupling1990管嘴nozzlesDIN 20039-软管连接件.软管Hose fittings - Hose

1998夹软管管接头.连接DIN 20040-套管阀.公称压力199016流体动力系统.软DIN 20066-管组件.尺寸、要2002求clampsHose fittings; nipplevalves; nominalpressure 16Fluid power systems -Hose assemblies -Dimensions,requirementsArticles and materials地下矿井用合成器from synthetic for use材和材料.管、管in underground mines;DIN 22100-隔离件和软管.安tubes, tube isolations5-1993全要求、检验、标and hoses; safety识requirements, testing,markingOilhydraulic andDIN 24950-第1部分:液压和气pneumatic; terms for1-1978动软管组件术语hose assembliesTerms for railway有轨机动车部件名vehicle parts -DIN 25624-称.互通通道.第1部Intercommunicating1-2001分:橡胶管通道连gangways - Part 1:接Rubber tube gangwayconnectionHose assemblies ofDIN 2827-化学制品用不锈钢stainless steel for2006软管chemical productsHose clamps withDIN 3017-1-涡轮传动软管卡worm gear drive;1998圈.A型shape AHose clamps - Part 2:DIN 3017-2-软管卡箍.第2部分:Clamps with fastening2002带紧固凸缘的卡箍lugsDIN 3017-3-软管卡箍.第3部分:Hose clamps - Part 3:2002螺栓卡箍Bolt clamps

DIN 3017-4-软管卡圈.第4部分:Hose clamps - Part 4:Technical delivery1998技术交货条件conditions软管卡箍.第5部分:Hose clamps - Part 5:DIN 3017-5-带紧固凸耳的宽带Wide strip hose clamps2002软管卡箍.D型和Ewith fastening lugs;型Types D and E软管夹件.弹簧板Hose clamps - SpringDIN 3021-1-夹件(FBS).第1部band clamp - Part 1:1999分:尺寸、标记、Dimensions, marking,材料和类型materials, typesHose clamps - Spring软管夹子.弹簧带DIN 3021-2-band clamp - Part 2:夹子.第2部分:交货1999Technical delivery技术条件conditions软管夹子.弹簧带Hose clamps - SpringDIN 3021-3-夹子.第3部分:系band clamp - Part 3:1999统: 弹簧带夹子-软System: Spring band管-插口clamp-hose-spigotHoses for gasfired不带外罩和配筋的burners forDIN 30664-实验室用燃气灶软laboratories, without1-1994管.第1部分:安全要shroud and armoring -求和试验Part 1: Safetyrequirements and tests液化石油气用软管Safety devices againstDIN 30693-的防断裂安全防护rupture of flexible1980装置tubes for LPGCouplings forcompressed air - Claw压缩空气匹配件.coupling, 42 mm爪状匹配件,带安internal width, withDIN 3238-全螺母内部宽度securing nut -200142mm,具有凸或凹Coupling with male,软管连接末端的匹female and hose配件连接环connection ends, joint

ringValves for domestic家用供水管道的阀DIN 3285-门.公称压力为10water supply; nipplesand unions nominal1988的螺纹连接管和联pressure 10; hose管节.软管连接管nipples家用供水管道的阀门.公称压力为10DIN 3291-的螺纹连接管和联1988管节.带螺纹的软管连接管Valves for domesticwater supply; nipplesand unions nominalpressure 10; threadedhose nipplesHose assemblies and煤气软管组件和连connection valves forDIN 3383-1-接阀.安全软管组gas; safety hose1990件、带有快速连接assemblies, safety装置的安全阀valves with quickconnecting deviceHose assemblies and燃气软管及连接connection valves forDIN 3383-2-件.第2部分:刚性连gas - Part 2: Hose1996接软管assemblies for rigidconnectionHose assemblies and软管组件和连接配connection fittings;DIN 3383-4-件.煤气用安全连safety connection1991接配件和试验室管fittings for gas and路用接头couplings forlaboratory tubingHose assemblies of燃气用不锈钢软管DIN 3384-stainless steel for gas -组件.安全要求、2007Safety requirements,测试和标记testing, markingCouplings for压缩空气匹配件.compressed air - Claw爪状匹配件,无安coupling, 42 mm全螺母的42mm内internal width, without

DIN 3489-宽,凸形凹形匹配2001件,软管和封闭连接末端旋转匹配件,连接环1KV以下的塑料绝缘电力电缆用热缩DIN 47632-塑料软管的连接套1-1978管.保护性连接套管1KV以下的塑料绝DIN 47632-缘电力电缆用热缩2-1978塑料软管的连接套管.内套管1KV以下的塑料绝缘电力电缆用热缩DIN 47632-塑料软管的连接套3-1978管.导线横截面的配置1KV以下的塑料绝DIN 47632-缘电力电缆用热缩4-1978塑料软管的连接套管.内部结构DIN 4815-2-液化气用软管.软1979管组件液化气用软管.运DIN 4815-3-输车辆用加气和排1985空用软管管道securing nut -Coupling with male,female, hose andclosure connectionends, rotary clawcouplings, joint ringJoint boxes of heat-shrinking plastic-hosefor plastic insulatedpower cables up to1000 V; jointprotection boxesJoint boxes of heat-shrinking plastic-hosefor plastic insulatedpower cables up to1000 V; internal jointboxesJoint boxes of heat-shrinking plastic-hosefor plastic insulatedpower cables up to1000 V; allocation ofconductor crosssectionsJoint boxes of heat-shrinking plastic-hosefor plastic insulatedpower cables up to1000 V; internalconstructionHoses for LPG; hoseassembliesFlexible tubes forLPG; flexible tubes forfilling and emptying of

transportation vehiclesHoses for LPG; hoses液化石油气用软and hose assembliesDIN 4815-4-管.车辆燃气装置for fuel gas1987用软管和软管组件installations in vehiclesHoses for LPG;液化气用软管.车coupling for LPG hose辆液化气管道用软DIN 4815-5-assemblies in vehicles;管接合器.第5部分:1988concepts safety安全要求概念、试requirements, tests,验、标记markingConduits and fittingsfor electrical电气装置用导管和installation; flexibleDIN 49012-管件.用于重机械metal conduits for1982应力的金属软管.heavy mechanical结构形式和要求stresses constructiontypes and requirements包装.金属及塑料Packaging; plasticDIN 5065-软管用端口塑料密closures for metal and1987封物plastic tubesMeans of packaging -包装材料.圆柱形Flexible cylindricalDIN 6103-塑料软管.同轴多plastic tubes - Coex2002层管.尺寸、材料multilayer tube;Dimensions, materialsAerospace - Non航空航天.非金属DIN 65164-metallic braided cable编织软管.第1部分:1-1997sleevings - Part 1:尺寸、重量Dimensions, massesAerospace - Non航空航天.非金属DIN 65164-metallic braided cable编织软管.第2部分:2-1997sleevings - Part 2:技术规范Technical specificationAerospace;

DIN 65178-航空航天.液体管道的构造和设计.6-1987软管组件、制造configuration anddesign of fluidpipelines; hoseassemblies,manufactureAerospace; hose航空航天.额定压assemblies for nominal力最高可达 210 巴DIN 65210-pressures up to 210的软管组件.第1部1-1987bar; technical分:软管技术规范specification for hosesAerospace; hose航空航天.额定压assemblies for nominal力最高可达 210 巴DIN 65210-pressures up to 210的软管组件.第2部2-1987bar; technical分:软管配件技术specification for hose规范fittingsAerospace; hose航空航天.额定压assemblies for nominal力最高可达 210 巴pressures up to 210DIN 65210-的软管组件.第3部bar; technical3-1987分:成套软管组件specification for技术规范complete hoseassembliesAerospace; hose航空航天.额定压assemblies for aDIN 65211-力最高可达 210 巴nominal pressure of1-1987的软管组件.第1部210 bar; technical分:软管技术规范specification for hosesAerospace; hose航空航天.额定压assemblies for a力最高可达 210 巴DIN 65211-nominal pressure of的软管组件.第2部2-1987210 bar; technical分:软管配件技术specification for hose规范fittingsAerospace; hose航空航天.额定压assemblies for a

DIN 65211-力最高可达 210 巴nominal pressure of3-1987的软管组件.第2部210 bar; technical分:成套软管组件specification for技术规范complete hoseassemblies航空航天.仪表的Aerospace;DIN 65212-低压软管.技术规instrumentation low1988pressure hoses;范technical specificationAerospace; hoses for航空航天.公称压sleeve attachment forDIN 65213-力为35巴以下的套nominal pressures up1988管连接用软管.技to 35 bar; technical术规范specificationFuel hoses - Part 1:DIN 73379-燃油软管.第1部分:Dimensions, material,1-1997尺寸、材料、标记markingDIN 73379-燃油软管.第2部分:Fuel hoses - Part 2:2-1997要求和试验Requirements and testsCooling pipes in motor汽车冷却管.软管vehicles - Hoses andDIN 73411-和元件.第1部分:尺compounds - Part 1:1-1996寸、材料、类型Dimensions, materials,typesCooling pipes in motor汽车冷却管.软管DIN 73411-vehicles - Hoses and和化合物.第2部分:2-1996compounds - Part 2:要求和试验Requirements, testing液压制动软管组Brake hose assemblies;DIN 74225-件.制动用软管接brake hose fittings;1991头.制动软管夹brake hose clips气压制动系统.双Air braking systems;DIN 74286-管气压制动系统的packing rings for hose1988软管联结器的密封couplings for double圈line braking systemsDIN 74304-压接管接头.软管Compression coupling;

1987接头气压制动设备.软DIN 74310-管.尺寸、材料、1-1993标志DIN 74310-气压制动设备.软2-1993管.要求、试验气压制动系统.软DIN 74325-管连接管.形状和1988尺寸hose couplingAir braking systems;hoses; dimensions,material, markingAir braking systems;hoses; requirements,testsAir braking systems;hose nipples; shapes,dimensionsWater fittings for家用设备的水管配domestic installation;件.公称压力10巴Screwed unions withDIN 7591-的两端用软管连接flat gasket for hose1981的带扁平垫圈的螺connection on either纹连接管side, designed fornominal pressure 10DIN 7714-硬橡胶管Ebonite pipes1975Rubber products -DIN 7715-橡胶产品.尺寸公Dimmensional40-1998差.软管tolerances; hosesShips and marinetechnology - Graphical船舶和海上技术.symbols for technical技术文献的图形符DIN 85005-documentation - Part号.第2部分:管和软2-19992: Piping and hose管组件.管和软管assemblies, pipe and连接.套管hose-joints,penetrationsHoses for welding,焊接、切割和相关cutting and allied工艺用软管.燃料processes; hoses withDIN 8541-2-气体、氧气和其它protective cover for1987不可燃气体用带外use with fuel gas,保护套的软管oxygen and other non-

焊接、切割和相关工艺用橡胶软管.DIN 8541-3-第3部分:特殊要求1995用有涂层和无涂层的氧化橡胶软管.安全要求和检验灭火和甲板冲洗设DIN 86200-备.软管接头.管件.1989软管.附件.造船用各类管件产品概要船舶用黄铜制公称DIN 86204-压力16的C型整体1993消防软管接头船舶用黄铜制公称DIN 86205-压力16的B型整体1993消防软管接头公称压力（PN）DIN 86211-16、带C或B型消1991防软管管接头和带法兰连接的灭火阀DIN 9462-航空航天.软管组1987件.测量DIN压接和模锻的软管CEN/TS口和金属环14421-2007combustible gasesRubber hoses forwelding, cutting andallied processes - Part3: Oxygen rubberhoses with and withoutcoatings for specialrequirements; safetyrequirements andtestingFire extinguishing andwash deck installation;hose couplings,armatures, hoses,accessories; summaryof types forshipbuildingSolid fire hosecoupling type C, PN16; made of brass, foruse on shipsSolid fire hosecoupling type B, PN16; made of brass foruse on shipsFire valves for PN 16,with fire hosecouplings type C or Band with flangeconnectionAerospace; hoseassemblies; surveyHose tail and ferrulefor crimping andswaging; Germanversion CEN/TS

14421:2006Steel wire and wireproducts - HoseDIN EN钢丝和钢丝制品.reinforcement wire;10324-2004软管加筋线German version EN10324:2004Showers hoses for (PBDIN EN盥洗室(PN 10)管10) sanitary tapware;1113-1997件用淋浴喷头软管German version EN1113:1997Rubber andthermoplastic hosesand hose assembliesfor liquid or gaseouschemicals -Specification -ResistanceRubber andthermoplastics hosesand hose assembliesfor liquid or gaseouschemicals -Specification; Germanversion EN12115:1999Irrigation technic -Reel machine systems- Part 1: Size series;German version EN12324-1:1998Packaging - Flexiblealuminium tubes -Wall thicknessdetermination method;German version EN12375:1998液体或气体化学品DIN EN用橡胶和热塑软管12115 Bb.1-和软管组件.规范.2001耐受性液体或气体化合物DIN EN用橡胶和热塑性软12115-1999管及软管组件.规范DIN EN灌溉方法.喷灌用12324-1-绕软管轮系统.第11999部分:尺寸系列DIN EN包装.铝软管.管壁12375-1998厚度的测定方法

Packaging - Flexible包装材料.软管材.tubes - Test method forDIN EN封闭体的气密性试the air tightness of12377-1998closures; German验方法version EN12377:1998Cryogenic vessels -flexibleDIN EN低温容器.低温软Cryogenic

hoses; German version12434-2000管EN 12434:2000Gas weldingequipment -Specification for hose气焊设备.焊接、DIN ENassemblies for切割和相关工艺设1256-2006equipment for welding,备用软管组件规范cutting and alliedprocesses; Germanversion EN 1256:2006Packaging - Flexiblecylindrical plasticDIN EN包装.圆柱形塑料tubes - Dimensions13045-2000软管.尺寸和公差and tolerances;German version EN13045:2000Packaging - Flexiblecylindrical metallicDIN EN包装.圆柱形金属tubes - Dimensions13046-2000软管.尺寸和公差and tolerances;German version EN13046:2000Packaging - Flexibleconical metallic tubes -DIN EN包装.圆锥形金属Dimensions and13047-2000软管.尺寸和公差tolerances; Germanversion EN13047:2000

包装.铝软管.内部DIN EN清漆薄膜厚度测量13048-2000方法建筑物通风.通气DIN EN管结构.软管尺寸13180-2002和机械要求DIN EN气焊机.焊接及相1327-1996关工艺用热塑软管DIN EN包装.圆柱形层压13461-2001软管.尺寸和公差DIN EN沥青用橡胶软管及13482-2002软管组件.规范Packaging - Flexiblealuminium tubes -Internal lacquer filmthickness measurementmethod; Germanversion EN13048:2000Ventilation forbuildings - Ductwork -Dimensions andmechanicalrequirements forflexible ducts; Germanversion EN13180:2001Gas weldingequipment -Thermoplastic hosesfor welding and alliedprocesses; Germanversion EN 1327:1996Packaging -Cylindrical flexiblelaminated tubes -Dimensions andtolerances; Germanversion EN13461:2001Rubber hoses and hoseassemblies for asphaltand bitumen -Specification; Germanversion EN13482:2001Rubber and plastichoses and hose

可测量的燃料分配DIN EN系统用带内部蒸气13483-2005回收的橡胶和塑料软管和软管组件.规范已测燃料分配系统DIN EN用橡胶和塑料软管1360-2005及软管组件.规范航空燃料输送用橡DIN EN胶软管和软管组1361-2004件.规范烃类、溶剂和化学品输送用热塑性多DIN EN层(非硫化)塑料软13765-2003管和软管组件.规范液化石油气和液化DIN EN天然气输送热塑性13766-2003多层非硫化软管和软管组件.规范assemblies withinternal vapourrecovery for measuredfuel dispensingsystems -Specification; Germanversion EN13483:2005Rubber and plastichoses and hoseassemblies formeasured fueldispensing systems -Specification; Germanversion EN 1360:2005Rubber hoses and hoseassemblies for aviationfuel handling -Specification; Germanversion EN 1361:2004Thermoplastic multi-layer (non-vulcanized)hoses and hoseassemblies for thetransfer ofhydrocarbons, solventsand chemicals -Specification; Germanversion EN13765:2003Thermoplastic multi-layer (non-vulcanized)hoses and hoseassemblies for thetransfer of liquidpetroleum gas andliquefied natural gas -

Specification; Germanversion EN13766:2003Respiratory protectivedevices - Fresh airhose breathing呼吸防护器.清洁apparatus for use with空气.全面罩、半DIN ENfull face mask, half面罩或口罩连接软138-1994mask or mouthpiece管装置.要求、测assembly -试,标记Requirements, testing,marking; Germanversion EN 138:1994Low resistance showerhoses for sanitaryDIN EN卫生设备旋塞用低tapware; German13905-2003阻力淋浴软管version EN13905:2003Hose fittings withclamp units - Part 1:带夹具的软管配DIN ENRequirements, survey,件.第1部分:要求、14420-1-designation and检查、名称与符号2007testing; English和试验version of DIN EN14420-1:2007-04Hose fittings withDIN EN带夹件的软管配clamp units - Part 2:14420-2-件.第2部分:软管尾Hose side parts of hose2005部的软管侧面部件tail; German versionEN 14420-2:2004Hose fittings withclamp units - Part 3:DIN EN带夹件的软管配Clamp units, bolted or14420-3-件.第3部分:栓接或pinned; German2005销接夹件version EN 14420-3:2004

DIN EN带夹具的软管配Hose fittings with14420-4-件.第4部分:法兰接clamp units - Part 4:Flange connections;2007头English version of DINEN 14420-4:2007-04Hose fittings withDIN EN带夹件的软管配clamp units - Part 5:14420-5-件.第5部分:螺纹连Threaded connections;2005接German version EN14420-5:2004Hose fittings withclamp units - Part 6:TW tank truckDIN EN带夹具的软管配couplings (includes14420-6-件.第6部分:TW油Amendment A1:2007);2007罐车接头English version of DINEN 14420-6:2004+A1:2007-04Hose fittings withclamp units - Part 7:DIN EN带夹件的软管配Cam locking couplings14420-7-件.第7部分:凸轮锁(includes Amendment2007紧接头A1:2007); Englishversion of DIN EN14420-7:2007-04Hose fittings withclamp units - Part 8:带夹具的软管配Symmetrical halfDIN EN件.第8部分:对称半coupling (Guillemin14420-8-节管接头(吉尔曼system) (includes2007系统)Amendment A1:2007);English version of DINEN 14420-8:2007-04Clamp type couplingassemblies for LPGDIN ENLPG传送软管用对transfer hoses; German

14422-2005壳式耦合组件version

14422:2004ENClamp type couplingassemblies for use with额定电压18巴及以DIN ENsteam hoses rated for下的蒸汽软管用对14423-2005pressures up to 18 bar;壳式耦合组件German version EN14423:2004Hose fittings withDIN EN带螺旋箍的软管管screwed ferrules;14424-2005件German version EN14424:2004Devices to preventpollution by backflow防饮用水回流污染of potable water - Hosebackflow的装置.软管接头union

DIN EN防回流装置DN 15preventer DN 15 to14454-2005至DN 32. A型H系DN 32 - Family H;type A; German列version EN14454:2005Fire-fighting hoses -Non-percolating layflat灭火软管.固定系DIN ENhoses for fixed统用非渗滤扁平软14540-2007systems; German管version EN14540:2004 + A1:2007Corrugated metal hoseassemblies for pressureapplications -压力设备用波纹金DIN ENGuidance on the use of属软管组件.第2部14585-1conformity assessment分:合格评定程序Bb.1-2006procedures; English使用指南version of DIN EN14585-1 Supplement

DIN EN压力设备用波纹金14585-1-属软管组件.第1部2006分:要求使用气体燃料连接DIN EN家用器具的波纹状14800-2007安全金属软管组件制冷系统和热泵.DIN EN软管元件、隔振器1736-2000和膨胀节.要求、设计和安装1:2006-04Corrugated metal hoseassemblies for pressureapplications - Part 1:Requirements; Germanversion EN 14585-1:2006Corrugated safetymetal hose assembliesfor the connectiondomestic applianceusing gaseous fuels;German version EN14800:2007Refrigerating systemsand heat pumps -Flexible pipe elements,vibration isolators andexpansion joints -Requirements, designand installation;German version EN1736:2000Rubber hoses and hose油罐车输油橡胶软assemblies for fuelDIN EN管和软管组件.规truck delivery -1761-1999范Specification; Germanversion EN 1761:1999Rubber hoses and hoseassemblies for25巴(2.5MPA)及以liquefied petroleum下液化石油气、gas, LPG (liquid orDIN ENLPG(液相和气相)gaseous phase) and1762-2004和天然气用橡胶软natural gas up to 25管和软管组件.规bar (2,5 MPa) -范Specification; German

version EN 1762:2003Rubber and plasticstubing, hoses andassemblies for use with商用汽态丙烷、丁commercial propane,烷及其混合物用橡commercial butane andDIN EN胶和塑料管、软管their mixture in the1763-1-2001和配件.第1部分:橡vapour phase - Part 1:胶管、塑料管和软Requirements for管要求rubber and plasticstubing and hoses;German version EN1763-1:2000Rubber and plasticstubing, hoses andassemblies for use with商用汽态丙烷、丁commercial propane,烷及其混合物用橡commercial butane andDIN EN胶和塑料管、软管their mixture in the1763-1-2001和配件.第1部分:橡vapour phase - Part 1:for胶管、塑料管和软Requirements

rubber and plastics管要求tubing and hoses;German version EN1763-1:2000Rubber hoseassemblies for oil油的吸放设备用橡suction and dischargeDIN EN胶软管组件.组件services - Specification1765-2005规范for the assemblies;German version EN1765:2004Fire-fighting hoses -Semi-rigid delivery消防软管.泵和水hoses and hoseDIN EN车用半刚性输水软assemblies for pumps1947-2007

and vehicles; Germanversion EN 1947:2002+ A1:2007Rubber hoses for watersuction and discharge;DIN EN给排水橡胶软管.specification (ISO24641-1993要求4641:1991); Germanversion EN24641:1993Rubber or plasticshoses; determination ofDIN EN橡胶和塑料软管.volumetric expansion26801-1993体积膨胀的测定(ISO 6801:1983);German version EN26801:1993Rubber and plasticshose and hoseassemblies with wire金属丝增强的橡胶reinforcements;DIN EN和塑料软管组件.hydraulic impulse test26802-1993挠曲状态下液压脉with flexing (ISO冲试验6802:1991); germanversion EN26802:1993Respiratory protective呼吸防护器.加护devices - Powered罩的电动式新鲜空fresh air hoseDIN EN气软管呼吸器.要breathing apparatus269-1994求、检验、标记;incorporating a hood -德文版本 ENRequirements, testing,269:1994marking; Germanversion EN 269:1994Rubber and plasticshoses; assessment of橡胶和塑料软管.ozone resistance underDIN EN静态条件下耐臭氧static conditions (ISO27326-1993管和软管组件

7326:1991); Germanversion EN27326:1993Plastics hose; generalpurpose collapsiblewater hose, textile塑料软管.一般用DIN ENreinforced;途的纺织物增强的28029-1993specification (ISO可折叠水管8029:1985); Germanversion EN28029:1993Dental handpieces -Hose connectors (ISODIN EN手持式牙科器械.9168:1991); German29168-1994软管连接件version EN29168:1994Gas weldingequipment - Rubber气焊机.焊接、切hoses for welding,DIN EN割和相关工艺用橡cutting and allied559-2003胶软管processes; Germanversion EN 559:2003Gas weldingequipment - Hose气焊设备.焊接、connections forDIN EN切割和相关工艺用equipment for welding,560-2005设备的软管连接cutting and alliedprocesses; Germanversion EN 560:2005Flexible insulatingsleeving - Part 3:Specification for绝缘软管套.第3部individual types of分:各类管套的规DIN ENsleeving; Sheet 151:范.第151页:挤压成60684-3-Extruded PVC/nitrile型的聚氯乙烯/腈151-1999sleeving; general橡胶管套.一般应性能的评定

purpose (IEC 60684-3-151:1998); Germanversion EN 60684-3-151:1998Flexible insulatingsleeving - Part 3:Specification for绝缘软管套.第3部individual types of分:各类管套的规DIN ENsleeving; Sheet 151:范.第151页:挤压成60684-3-Extruded PVC/nitrile型的聚氯乙烯/腈151-1999sleeving; general橡胶管套.一般应purpose (IEC 60684-3-用151:1998); Germanversion EN 60684-3-151:1998Flexible insulatingsleeving - Part 3:Specifications forindividual types ofsleeving - Sheet 212:Heat-shrinkablepolyolefin sleevings60684-3-DIN EN绝缘软管.第3部分:(IEC

60684-3-212各种型号软管规212:2005); GermanBerichtigung范.活页212:热收缩version EN 60684-3-212:2006, Corrigenda1-2007聚烯烃软管to DIN EN 60684-3-212 (VDE 0341-3-212):2006-08;CENELEC-CorrigendumNovember 2006 to EN60684-3-212:2006Flexible insulatingsleeving - Part 3:Specifications for用

DIN EN绝缘软套管.第3部individual types of分:各种型号软管sleeving - Sheet 212:60684-3-规范.活页212:热收Heat-shrinkable212-2006缩聚烯烃软管polyolefin sleevings(IEC 60684-3-212:2005); Germanversion EN 60684-3-212:2006Flexible insulatingsleeving - Part 3:Specifications forindividual types of绝缘软套管.第3部sleeving - Sheet 228:分:各种型号软管Heat-shrinkable, semi-DIN EN规范.活页228:阻rigid polyvinylidene60684-3-燃、耐流体、收缩fluoride sleeving,228-2005比2:1的热收缩、flame retarded, fluid半硬质聚偏二氟乙resistant, shrink ratio烯软管2:1 (IEC 60684-3-228:2004); Germanversion EN 60684-3-228:2004Flexible insulatingsleeving - Part 3:Specifications forindividual types of绝缘软管衬.第3部sleeving - Sheet 233:分:各类管衬的规Heat-shrinkable,DIN EN范.第233页:阻燃的fluoroelastomer60684-3-耐流体的收缩比为sleeving, flame233-20062:1的热收缩含氟retarded, fluid弹性管套(IECresistant, shrink ratio60684-3-2:1 (IEC 60684-3-233:2006); Germanversion EN 60684-3-233:2006

Flexible insulatingsleeving - Part 3:for绝缘软管.第3部分:Specifications

individual types ofDIN EN各型软管规范.24060684-3-240至243节:热收缩聚sleeving; Sheets 240 tobis 243-2003四氟乙烯(PTFE)绝243: Heat-shrinkablePTFE sleeving (IEC缘软管60684-3-240 to243:2002); Germanversion EN 60684-3-240 to 243:2002Flexible insulatingsleeving - Part 3:Specifications forindividual types of绝缘软套管.第3部sleeving - Sheet 271:分:各种型号软管Heat-shrinkableDIN EN规范.活页271:阻elastomer sleeving,60684-3-燃、耐流体、收缩flame retarded, fluid271-2005比2:1的热收缩高resistant, shrink ratio弹性软管2:1 (IEC 60684-3-271:2004); Germanversion EN 60684-3-271:2004Flexible insulatingsleeving - Part 3:Specifications forindividual types of绝缘软管.第3部分:DIN ENsleeving; Sheet 300:各型软管规范.30060684-3-Glass textile fibre节:无涂层玻璃纤300-2003sleeving, braided,维编织软管uncoated (IEC 60684-3-300:2002); Germanversion EN 60684-3-300:2002Flexible insulating

sleeving - Part 3:Specifications for绝缘软管.第3部分:individual types ofDIN EN各型软管规范.320sleeving; Sheet 320:60684-3-节:轻度浸渍的聚Polyethylene320-2003对苯二甲酸乙二醇terephthalate textilesleeving, lightly酯编织物impregnated (IEC60684-3-320:2002);German version EN60684-3-320:2002Flexible insulatingsleeving - Part 3:Specification forindividual types ofsleeving; Sheets 343 to绝缘软管.第3部分:345: ExpandableDIN EN各型软管规范.343braided ethylene60684-3-343至345节:无涂层可chlorotrifluoroethylenebis 345-2003扩张乙烯三氟氯乙(E-CTFE) textile烯纤维编织软管sleeving, uncoated(IEC 60684-3-343 to345:2002); Germanversion EN 60684-3-343 to 345:2002Flexible insulatingsleeving - Part 3:Specifications forindividual types of绝缘软管.第3部分:sleeving; Sheets 400 toDIN EN各型软管规范.400402: Glass textile60684-3-400至402节:带硅弹性sleeving with siliconebis 402-2003涂层的玻璃纤维软elastomer coating (IEC管60684-3-400 to402:2002); Germanversion EN 60684-3-

400 bis 402:2002Flexible insulatingsleeving - Part 3:Specifications forindividual types of绝缘软管.第3部分:sleeving; Sheets 403 toDIN EN各型软管规范.403405: Glass textile60684-3-403至405节:丙烯酸酯sleeving with acrylicbis 405-2003玻璃纤维编织软管coating (IEC 60684-3-403 to 405:2002);German version EN60684-3-403 to405:2002Flexible insulatingsleeving - Part 3:Specifications forindividual types of绝缘软管.第3部分:sleeving - Sheets 406DIN EN各种型号软管规to 408: Glass textile60684-3-406范.活页406-408:带sleeving with PVCbis 408-2004PVC涂层的玻璃纤coating (IEC 60684-3-维编织软管406 bis 408:2003);German version EN60684-3-406 bis408:2003Flexible insulatingsleeving - Part 3:Specifications forindividual types ofsleeving; Sheets 420 to绝缘软管.第3部分:DIN EN422: Polyethylene各型软管规范.42060684-3-420terephthalate textile至422节:丙烯酸酯bis 422-2003sleeving with acrylic聚酯纤维软管based coating (IEC60684-3-420 to422:2002); Germanversion EN 60684-3-

420 bis 422:2002Live working -带电作业.绝缘材Flexible conductor料的柔性导体封盖covers (line hoses) of物 (线路软管) (IECDIN ENinsulating material61479:2001 +61479-2002(IEC 61479:2001 +A1:2002); 德文版A1:2002); German本 EN 61479:2001version EN+ A161479:2001 + A1:2002Electric appliancesconnected to the watermains - Avoidance ofbacksiphonage and与总水管连接的电failure of hose-setsDIN EN气器具.避免软管(IEC 61770:1998 +61770-2007组件的反虹吸和失A1:2004 + A2:2006);效German version EN61770:1999 +CorrigendumDecember 2005 +A1:2004 + A2:2006Live working -Insulating hoses withfittings for use with带电作业.液压工hydraulic tools andDIN EN(IEC具和设备用带配件equipment

62237-200562237:2003,的绝缘软管modified); Germanversion EN62237:2005固定式消防系统.Fixed firefighting水龙带系统.第1部systems - HoseDIN EN分:半刚性水龙带systems - Part 1: Hose671-1-2001的软管卷盘; 德文reels with semi-rigid版本 EN 671-hose; German version1:2001EN 671-1:2001

Fixed firefighting固定式消防系统.systems - HoseDIN EN软管系统.第2部分:systems - Part 2: Hose671-2/A1-带吹塑软管的软管systems with lay-flat2004系统hose; German versionEN 671-2:2001/A1:2004Fixed firefightingsystems - Hose固定的消防设备.systems - Part 3:软管系统.第3部分:Maintenance of hoseDIN EN半钢性软管卷曲机reels with semi-rigid671-3-2000和扁平软管系统维hose and hose systems修with lay-flat hose;German version EN671-3:2000 + AC:2000Fire-fighting hoses -Semi-rigid hoses forDIN EN消防软管.固定系fixed systems; German694-2007统用半刚性软管version EN 694:2001 +AC:2002 + AC:2003 +A1:2007Low-pressure hose医疗气体用低压软assemblies for use with管组件(包括修改medical gasesDIN EN件A1:2002); 德文(includes Amendment739-2002版本 EN 739:1998A1:2002); German+ A1:2002version EN 739:1998 +A1:2002Rubber hoses and hose橡胶软管和软管组assemblies - WireDIN EN件.带金属丝编织braid reinforced853-1997层的液压软管.规hydraulic type -范Specification; Germanversion EN 853:1996Rubber hoses and hose

DIN EN橡胶软管和软管组assemblies - Textile件.带织物编织层reinforced hydraulic854-1997的液压软管.规范type - Specification;German version EN854:1996Plastic hoses and hoseassemblies -塑料软管和软管组Thermoplastics textileDIN EN件.带织物编织层reinforced hydraulic855-1997的塑料液压软管.type - Specification;规范German version EN855:1996Rubber hoses and hoseassemblies - Rubber-橡胶软管和软管组covered spiral wireDIN EN件.带金属丝螺旋reinforced hydraulic856-1997垫层的液压软管.type - Specification;规范German version EN856:1996Rubber hoses and hoseassemblies - Wire橡胶软管和软管组braid reinforcedDIN EN件.带金属丝编织compact type for857-1997层的紧凑型液压软hydraulic applications管.规范- Specification;German version EN857:1996Agricultural andforestry machinery -农林机械.带软管DIN ENReel machines for卷筒的喷灌机.安908-1999irrigation - Safety;全性German Version EN908:1999Pipework - Corrugatedmetal hose and hose管道系统.波纹状DIN EN ISOassemblies (ISO金属软管和软管组

10380-2003件10380:2003); Germanversion EN ISO10380:2003Pipework - Fittings forcorrugated metal hosesDIN EN ISO管道工程.波纹状(ISO 10806:2003);10806-2004金属软管用配件German version ENISO 10806:2003Pipework - Corrugatedflexible metallic hoseassemblies for the管道工程.爆燃性protection of electricalDIN EN ISO空气电缆保护用波cables in explosive10807-1997纹金属软管组件atmospheres (ISO10807:1994); Germanversion EN ISO10807:1996Rubber and plasticshoses - Assessment ofozone resistance underDIN EN ISO橡胶和塑料软管.dynamic conditions10960-1996动态耐臭氧性评估(ISO 10960:1994);German version ENISO 10960:1996Rubber and plasticshoses - Exposure to axenon arc lamp -of橡胶和塑料软管.Determination

DIN EN ISO氙弧灯曝光.颜色changes in colour and11758-1997appearance (ISO和外观变化11758:1995); Germanversion EN ISO11758:1997Rubber and plasticshoses for general-工业通用橡胶和塑purpose industrial

料软管.内径和公applications - BoreDIN EN ISO差、长度公差diameters and1307-1996(ISO 1307:1992);tolerances, and德文版本 EN ISOtolerances on length1307:1995(ISO 1307:1992);German version ENISO 1307:1995Petroleum and naturalgas industries - Designand operation of石油天然气工业.subsea production海底生产系统设计systems - Part 2:DIN EN ISO和操作.第2部分:海Unbonded flexible13628-2-底和船用自由软管pipe systems for2006系统(ISO 13628-2-subsea and marine2006)applications (ISO13628-2:2006);English version ENISO 13628-2:2006Rubber hoses foragricultural sprayingDIN EN ISO农业喷灌用橡胶软(ISO 1401:1999);1401-2000管German version ENISO 1401:1999Rubber and plasticshoses and hose橡胶和塑料软管及assemblies -DIN EN ISO软管组件.液压静Hydrostatic testing1402-1996力试验(ISO 1402:1994);German version ENISO 1402:1996Gas weldingequipment - Rubberand plastic hosesassembled forcompressed or气焊设备.最大设

DIN EN ISO计压力不超过450liquefied gases up to a14113-1997巴液化气橡胶及塑maximum design料软管组件pressure of 450 bar(ISO 14113:1997);German version ENISO 14113:1997Pipework - Stripwoundmetal hoses and hoseDIN EN ISO管道工程.带绕金assemblies (ISO15465-2004属软管和软管配件15465:2004); Germanversion EN ISO15465:2004Ships and marinetechnology - Fireresistance of hose船舶和航海技术.DIN EN ISOassemblies - Test软管组件耐燃性.15540-2002methods (ISO试验方法15540:1999); Germanversion EN ISO15540:2001Ships and marinetechnology - Fireresistance of hose-船舶和航海技术.assemblies

DIN EN ISO软管组件耐燃性.Requirements for the15541-2002test bench (ISO试验板要求15541:1999); Germanversion EN ISO15541:2001Rubber or plasticshoses and tubing -Bending tests (ISODIN EN ISO橡胶或塑料软管和1746:1998, including1746-2000管道.弯曲试验TechnicalCorrigendum 1:1999);

German version ENISO 1746:2000Rubber hose, textile-reinforced, for压缩空气用纺织纤compressed air -DIN EN ISO维增强橡胶软管.Specification (ISO2398-1997规范2398:1995); Germanversion EN ISO2398:1997Rubber hoses for sandand grit blasting -DIN EN ISO喷砂橡胶软管.规Specification (ISO3861-1997范3861:1995); Germanversion EN ISO3861:1997Plastics hoses -Helical-thermoplastic-reinforcedthermoplastics hoses塑料软管.给排含for suction andDIN EN ISO水物质用螺旋热塑discharge of aqueous3994-2000塑料增强的热塑塑materials -料软管.规范Specification (ISO3994:1998); Germanversion EN ISO3994:2000蒸汽用橡胶软管.Rubber hoses for试验方法 (ISOsteam - Test methodsDIN EN ISO898-7:1992); 德文(ISO 4023:1991);4023-1995版本 EN 20898-German version EN7:1995ISO 4023:1995Rubber and plastics橡胶和塑料软管和hoses and hose软管组件.透气性assemblies -DIN EN ISO测定 (ISODetermination of4:1991); 德文版permeability to gas

ISO(ISO 4080:1991);German version ENISO 4080:1995Rubber and plasticshoses and hoseassemblies - Methods橡胶和塑料软管及DIN EN ISOof measurement of软管组件.尺寸测4671-2000dimensions (ISO量方法4671:1999); Germanversion EN ISO4671:2000Rubber and plasticshoses - Sub-ambient橡胶和塑料软管.DIN EN ISOtemperature flexibility低于室温的柔性试4672-1999tests (ISO 4672:1997);验German version ENISO 4672:1999Rubber hose and hoseassemblies fortransferring anhydrous输送无水氨用橡胶ammonia -DIN EN ISO软管和软管组件.Specification (ISO5771-1996规范5771:1994, includingCorr 1:1995); Germanversion EN ISO5771:1996Plastics hoses, textile-reinforced, forcompressed air -DIN EN ISO压缩空气用织物增Specification (ISO5774-2000强塑料软管.规范5774:1997); Germanversion EN ISO5774:2000Rubber hoses and hose饱和蒸汽用橡胶软assemblies for管和软管组件.规saturated steam -本 EN

4080:1995

DIN EN ISO范(ISO 6134-2005).Specification (ISO6134-2006德文版本 EN ISO6134:2005); German6134-2005version EN ISO6134:2005Plastics hoses, textile-reinforced, for general-purpose waterapplications -Specification (ISO6224:1995); Germanversion EN ISO6224:1997Rubber or plasticshoses and hoseassemblies -Hydraulic-pressureimpulse test withoutflexing (ISO6803:1994); Germanversion EN ISO6803:1997Rubber hoses and hoseassemblies for use inoil burners -Specification (ISO6806:1992); Germanversion EN ISO6806:1995Rubber hoses and hoseassemblies for rotarydrilling and vibrationapplications -Specification (ISO6807:2003); Germanversion EN ISO6807:2003带织物加固内衬的DIN EN ISO橡胶供水软管.规6224-1997范橡胶和塑料软管及DIN EN ISO软管组件.无弯曲6803-1997液压压力脉冲试验DIN EN ISO油燃烧器软管和软6806-1996管组件.规范旋转式钻探和振动DIN EN ISO装置用橡胶软管和6807-2004软管组件.规范

Plastics hoses and hoseassemblies for suctionand low-pressureDIN EN ISO给排油用塑料软管discharge of petroleum6808-2000及软管组件.规范liquids - Specification(ISO 6808:1999);German version ENISO 6808:2000Rubber hoses -Determination ofabrasion resistance ofthe outer cover (ISODIN EN ISO橡胶软管.外覆层6945:1991) (including6945-2000耐磨性的测定Amendment A1);German version ENISO 6945:1996 +A1:2000Rubber and plastics橡胶和塑料软管和hoses and hose软管组件.吸入阻assemblies -DIN EN ISO力测定 (ISODetermination of7233-19957233:1991); 德文版suction resistance (ISO本 EN ISO7233:1991); German7233:1995version EN ISO7233:1995Pipework - Metalhoses and hose管道工程.金属软assemblies -DIN EN ISO管和软管组件.词Vocabulary (ISO7369-2005汇7369:2004); Trilingualversion EN ISO7369:2004Rubber and plasticshoses - DeterminationDIN EN ISO橡胶和塑料软管.of abrasion of lining(ISO 7662:1988);7662-1996内衬磨损测定

German version ENISO 7662:1996Rubber and plastics橡胶和塑料软管及hoses and hose软管组件.试验压assemblies - Ratios of力和爆破压力与设proof and burstDIN EN ISO计工作压力的比值pressure to design7751-1997(ISO 7751:1991);working pressure (ISO德文版本 EN ISO7751:1991); German775version EN ISO7751:1997Small craft - Fireresistant fuel hosesDIN EN ISO小艇.耐火燃油软(ISO 7840:2004);7840-2004管German version ENISO 7840:2004Rubber and/or plasticshoses and hoseassemblies for airless真空喷漆用橡胶DIN EN ISOpaint spraying -和/或塑料软管组8028-2000Specification (ISO件.规范8028:1999); Germanversion EN ISO8028:2000Rubber and plasticshoses - Method of testDIN EN ISO橡胶和塑料软管.for flammability (ISO8030-1998易燃烧性试验方法8030:1995); Germanversion EN ISO8030:1997Rubber and plasticshoses and hose-橡胶和塑料软管及assemblies

DIN EN ISO软管组件.电阻测Determination of8031-1997定electrical resistance(ISO 8031:1993);

German version ENISO 8031:1997Rubber and plasticshose assemblies -橡胶和塑料软管组Flexing combined with件.结合液压脉冲DIN EN ISOhydraulic impulse test试验的软管弯曲试8032-1999(half-omega test) (ISO验(半Ω 型弯曲试8032:1997); German验)version EN ISO8032:1999Rubber and plasticshoses - Determination橡胶和塑料软管.of adhesion betweenDIN EN ISO元件间附着力的测components (ISO8033-2006定(ISO 8033:2006)8033:2006); Englishversion of DIN ENISO 8033:2006-11Rubber and plasticshoses and tubing -Determination of橡胶和塑料软管及transmission of liquidsDIN EN ISO管系.软管和管壁through hose and8308-1996的透液量测定tubing walls (ISO8308:1993); Germanversion EN ISO8308:1995Rubber and plasticshoses and hoseassemblies -DIN EN ISO橡胶和塑料软管和Vocabulary (ISO8330-2000软管组件.词汇8330:1998); Germanversion EN ISO8330:2000Small craft - Non-fire-小型船舶.非耐火resistant fuel hosesDIN EN ISO燃料软管 (ISO(ISO 8469:2006);8469-2006

English version of DINEN ISO 8469:2006-10Rubber and plastics橡胶和塑料软管.hoses - Determination静定状态下抗紫外of ultra-violetDIN EN ISO线的测定 (ISOresistance under static8580-19958580:1987); 德文版conditions (ISO本 EN ISO8580:1987); German8580:1995version EN ISO8580:1995Aerospace - Hose航空航天.温度为assemblies in230℃以下气压为polytetrafluoroethyleneDIN ISO10500KPa时使用(PTFE) for use up to10502-1997的聚四氟乙烯232 °C and 10500 kPa(PTFE)软管.采购- Procurement规范specification (ISO10502:1992)Connections forhydraulic fluid power液压传动和通用连and general use - Hose接件.软管接头.第2DIN ISOfittings - Part 2: Hose部分:带ISO 8434-112151-2-fittings with ISO 8434-和8434-4 24°锥形20041 and ISO 8434-4 24°连接件末端和O形cone connector ends圈的软管接头with O-rings (ISO12151-2:2003)Connections forhydraulic fluid power液压传动和通用连DIN ISOand general use - Hose接件.软管接头.第312151-3-fittings - Part 3: Hose部分:带ISO 6162法2004fittings with ISO 6162兰末端的软管接头flange ends (ISO12151-3:1999)航空航天.流体系Aerospace - Fluid统.液压软管、管systems - Impulse8469-2006)

DIN ISO道和连接组件的脉testing of hydraulic6772-1996冲试验 (ISOhose, tubing and fitting6772:1988)assemblies (ISO6772:1988)Aerospace;polytetrafluoroethylene航空航天.航空航(PTFE) tubing for天用聚四氟乙烯aerospace applications;DIN ISO(PTFE)软管.密度methods for the7258-1987和相对密度的测定determination of the方法.与ISO7258,density and relative1984相同density; identical withISO 7258, edition 1984Aerospace series -Design andconstruction of flexible航空航天系列.液hoses and hoseDIN V体和气体用的柔性assemblies for fluids in65900-13-软管和软管组件的liquid and gaseous1998设计及制造.安装condition - Installation(AECMA TechnicalReport TR 2675:1996+ Corrigendum 1997)编号中文名称英文名称返回