Dell FluidFS 版本 6.0 FS8600 设备固件更新指南说明书

Dell FluidFS Version 6.0FS8600 ApplianceFirmware Update Guide

Notes, Cautions, and WarningsNOTE: A NOTE indicates important information that helps you make better use of your N: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoidthe G: A WARNING indicates a potential for property damage, personal injury, or death.© 2017 - 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its trademarks may be trademarks of their respective owners.

About .4Chapter 1: Updating FluidFS Software on 5Supported 5Performing 6Updating From FluidFS Version 5.0 to 6Performing 7Chapter 2: 8Documents Intended for 8Documents Intended for Dell Installers and Certified 8Contents3

The Dell FluidFS Version 6.0 FS8600 Appliance Firmware Update Guide provides information about updating the software on aDell FS8600 FluidFS cluster. The document describes how to update the FluidFS software from version 5.0 to version 6.0 andalso includes a list of related on HistoryDocument number: 680-112-002Table 1. Revision History

RevisionABDateJuly 2017June 2021DescriptionInitial release of FluidFS version 6.0Update for FluidFS version 6.0.5001354About This Guide

1Updating FluidFS Software on FS8600AppliancesThis section provides information that you need to update the FluidFS software on your FS8600 :••••••Supported Update PathsUpdate ConsiderationsPerforming Pre-Update TasksPre-Update ChecksUpdating From FluidFS Version 5.0 to 6.0Performing Post-Update TasksSupported Update PathsFor the supported update paths to FluidFS version 6.0, see the Dell Fluid File System Version 6 Support Matrix. This matrix isavailable from / ConsiderationsThe internal storage reservation for the cluster-wide data reduction dictionary was increased to 20 GB for the entire ming Pre-Update TasksComplete the tasks in the following list before updating to the latest version of FluidFS version 6.0.●Change the FluidFS cluster name and NetBIOS name to sure the cluster name contains 15 or fewer characters and does not begin with a number.●Delete local user names that have a period as the last character. Recreate these accounts with different names.●Stop all NDMP backup an NDMP backup session is in progress during the update, the temporary NDMP snapshot is left in additional ports on your firewall to allow replication between replication sure SMB shares and NFS exports have only alphanumeric characters in the Comment sure all the defined DNS servers are accessible using ping and dig (DNS lookup utility).Make sure the Active Directory domain controller is accessible using ping, and that the FluidFS cluster system time is in syncwith the Active Directory time.●Make sure the NAS controllers are running, attached, and accessible using ping, SSH, and gh only one NAS controller is required to be running in each NAS appliance, Dell recommends that all NAS controllers berunning.●●●●Updating FluidFS Software on FS8600 Appliances5

Pre-Update ChecksThe following pre-update checks occur when updating to FluidFS v6 or 2. Pre-Update Checks

DescriptionCheck that DataReduction ArchiveMode is notenabled.v5 to v6XN/Av6 to later v6NotesData Reduction Archive mode is deprecatedin v6, the pre-update check will not allowupdating to v6 if NAS volumes have DataReduction Archive mode set. Instead, use 1-day filter for data reduction setting.-----Update is not allowed in No-Service Mode.-The maximum SMB version cannot be set toSMB 1 or SMB 2 if message encryption isrequired.-N/ACheck that all attached controllers are up that File System is in optimal that all LUNS are accessible from that all configuration objects are that the mount table (mtab) is not lockedon all that the File System is not in that there are no more than 400 publicIps defined in all Message Encryption should be set for SMB3.0 and the validity of an NFS Export ACEregarding the Subnet netmask:●Netmask is not set to a Broadcast●Netmask is not set to a Multicast●Netmask is not set to a LinkLocal●Netmask is not set to a LoopBackCheck that there is no NAS Volume accessrestriction to the Admin that there are no invalid Administrators .XXXXXXXXXXXXXXN/AN/AXXXN/AN/A--Updating From FluidFS Version 5.0 to 6.0Use the procedure in this section to update a Dell FS8600 FluidFS cluster from FluidFS version 5.0 to :●Some FluidFS version 5.0 maintenance releases cannot be updated directly to FluidFS version 6.0. See the FluidFS v6Support Matrix for a listing of the supported update paths.●When a service pack is installed, the NAS controllers reboot during the installation process. Rebooting might causeinterruptions in SMB, NFS, and FTP client connections. Therefore, Dell recommends installing service packs during amaintenance uisites●Update to Dell Storage Manager 2016 R3 or later. Dell recommends using the latest Dell Storage Manager version. For moreinformation about updating Dell Storage Manager, see the Dell Storage Manager Release Notes.6Updating FluidFS Software on FS8600 Appliances

●The Storage Center OS must be at version 6.5.10 or later. For more information about updating the Storage Center OS, seethe Storage Center Software Update Guide.●Perform the pre-update tasks as described in Performing Pre-Update Tasks on page 5.●Contact Dell Technical Support to obtain the latest FluidFS version 6.0 service pack. Do not modify the file name of theservice ad and Install the Service ad the service pack using one of the following methods:●Make sure that Dell Storage Manager and SCOS are both running supported versions, and then contact Dell TechnicalSupport to enable the upgrade rule in SupportAssist for your FS8600 cluster. After the rule is enabled, right-clickthe cluster name in Dell Storage Manager, then select Actions > Check for Upgrade to download the service packautomatically.●Request an FTP link from Dell Technical Support, manually download the service pack, and use FTP to upload the servicepack to the FS8600 : When you upload a FluidFS ISO file to the FTP folder, it disappears from the FTP folder after a few minutes. Thefile is being extracted and moved to a different location prior to applying the l the FluidFS version 6.0 service N: The installation process for the service pack cannot be reversed. After the service pack isinstalled, the system cannot revert to the previous the service pack is uploaded to the system, it is displayed in Dell Storage Manager as available, but not -click the service pack and choose upgrade to install ming Post-Update TasksAfter you update FluidFS, complete the tasks in the following list.●If you disabled secured management before the update, reenable this feature.●If you plan to enable data reduction, make sure that you allocate sufficient space for the NAS pool.●If antivirus scanning is enabled, configure the file-size threshold and whether to allow or deny access to files that are largerthan this threshold.●Restart Dell Storage ng FluidFS Software on FS8600 Appliances7

2Related DocumentationThe following documents comprise the core Dell FluidFS for FS8600 Appliance documentation set. The documents are sorted byintended :••Documents Intended for Dell CustomersDocuments Intended for Dell Installers and Certified Business PartnersDocuments Intended for Dell Customers●Dell FluidFS Version 6.0 FS8600 Appliance CLI Reference Guide – Provides information about the FS8600 appliancecommand-line interface.●Dell FluidFS Version 6.0 Release Notes – Provide information about FluidFS releases, including new features andenhancements, open issues, and resolved issues.●Dell FluidFS Version 6.0 Support Matrix – Provides information about supported software and hardware configurations aswell as usage requirements and recommendations for Dell FluidFS v6.x products.●Dell Storage Manager Installation Guide – Provides information about installing and configuring the Dell Storage ManagerData Collector and Dell Storage Manager Client.●Dell Storage Manager Administrator’s Guide – Provides information about using the Dell Storage Manager software tomanage Storage Center and FS8600 appliances.●Dell Storage Manager Release Notes – Provides information about Dell Storage Manager releases, including new featuresand enhancements, open issues, and resolved nts Intended for Dell Installers and CertifiedBusiness Partners●Dell FluidFS Version 6.0 FS8600 Appliance Pre-Deployment Requirements – Provides a checklist that assists in preparingto deploy an FS8600 appliance before a Dell installer or certified business partner arrives onsite to perform an FS8600appliance installation.●Dell FluidFS Version 6.0 FS8600 Appliance Deployment Guide – Provides information about deploying an FS8600 appliance,including cabling the appliance to one or more Storage Centers and the network, and deploying the appliance using the DellStorage Manager software.●Dell FS8600 Appliance Service Guide – Provides information about FS8600 appliance hardware, system componentreplacement, and system troubleshooting.●Dell NAS Appliance SFP+ Replacement Procedure – Provides information about replacing SFP+ transceivers on an inactivesystem.●Dell FluidFS FS8600 Appliance 1Gb to 10Gb Upgrade Procedure – Provides information about upgrading a Fibre ChannelFS8600 appliance from 1Gb Ethernet client connectivity to 10Gb Ethernet client connectivity.8Related Documentation