netapp dateontap 8.1.4初始化配置及升级微码

目录

1.初始化过程.................................................................................................................................... 1

2.升级DataONTAP和SP微码 ......................................................................................................... 2

2.1确认DataONTAP和SP微码版本 ...................................................................................... 3

2.2搭建一个http服务 ............................................................................................................ 3

2.3升级DataONTAP ................................................................................................................. 4

2.4升级SP ................................................................................................................................ 5

1. 初始化过程

(项目只要设置管理地址，不NAS设置数据口地址)

Please enter the new hostname []: Y7‐S12‐2240A /按项目信息表要求设置NODE名称

Do you want to enable IPv6? [n]:

Do you want to configure interface groups? [n]:

Please enter the IP address for Network Interface e0a []:

Please enter the IP address for Network Interface e0b []:

Please

enter the IP address for Network Interface e0c []:

Please enter the IP address for Network Interface e0d []:

e0M is a Data ONTAP dedicated management port.

NOTE: Dedicated management ports cannot be used for data

protocols (NFS, CIFS, iSCSI, NDMP or Snap*),

and if they are configured

they should be on an isolated management LAN.

The default route will use dedicated mgmt ports only as the last resort,

since data protocol traffic will be blocked by default.

Please enter the IP address for Network Interface e0M []: 172.18.53.54 /按项目信息表要

求更改设置管理IP

Please enter the netmask for Network

Interface e0M [255.255.0.0]: 255.255.255.0 /按项目信

息表要求设置子网掩码

Should interface e0M take over a partner IP address during failover? [n]: y

Please enter the IPv4 address or interface name to be taken over by e0M []: 172.18.53.53 /按

项目信息表要求设置partner管理IP

Please enter flow control for e0M {none, receive, send, full} [full]:

Please

enter the name or IP address of the IPv4 default gateway: 172.18.53.254 /按项目信息

表要求更改设置网关IP

The administration host is given root access to the filer's

/etc files for system administration. To allow /etc root access

to all NFS clients enter RETURN below.

Please enter the name or IP address of the administration host:

Please enter timezone []: Asia/Shanghai /设置时区

Where is the filer located? []:

What language will be used for multi‐protocol files (Type ? for list)?:‐8 /设置语言

Language on volume vol0 already set to ‐8 (Simplified Chinese

(GBK) with UTF‐8)

Use vol lang to change language

Language on volume orcalevol already set to ‐8 (Simplified Chinese (GBK) with UTF‐8)

Language on volume vol_02072014_174938 already set to ‐8 (Simplified Chinese (GBK)

with UTF‐8)

Enter the root directory for HTTP files [/vol/vol0/home/http]:

Do you want

to run DNS resolver? [n]:

Do you want to run NIS client? [n]:

The Service Processor (SP) provides remote management capabilities

including console redirection, logging and power control.

It also extends autosupport by sending

additional system event alerts. Your autosupport settings are used

for sending these alerts via

email over the SP LAN interface.

Would you like to configure the SP LAN interface [y]: n

The initial aggregate currently contains 2 disks; you may add more

disks to it later using the "aggr add" command.

Please enter the name or IP address of the mail host [mailhost]:

You may use the autosupport options to configure alert destinations.

Setting the administrative (root) password for Y7‐S12‐2240A ...

New password: /安装项目信息设置密码

admin1234Root

Retype new password: /安装项目信息设置密码

admin1234Root

初始化完成后关闭磁盘自动指派ownship

Y7‐S12‐2240A

>

Y7‐S12‐2240A

> options _assign off /闭磁盘自动指派ownship

2.升级DataONTAP和SP微码