admin 管理员组文章数量: 887018
2024年3月19日发(作者：java数组下标越界异常)
CHAPTER
4
Initial Configuration
This chapter provides instructions for initial configuration of the CiscoIAD880 series integrated access
devices (IADs). For initial configuration, we recommend using
CiscoConfigurationProfessional(CP)Express. CiscoCP Express is a web-based graphical user
interface that guides you through initial configuration.
You may also initially configure your router by using the CiscoIOS command-line interface (CLI) or by
using the setup command facility. To create the initial configuration, the setup command facility prompts
you for basic information about your router and network.
This chapter contains the following sections:
•
•
•
•
•
Cisco Configuration Professional Express, page4-1
Cisco IOS CLI, page4-1
Setup Command Facility, page4-3
Verifying the Initial Configuration, page4-5
Initial Configuration of the Wireless Access Point, page4-5
Cisco Configuration Professional Express
After you connect cables and power up the router, we recommend that you use the CiscoCPExpress
web-based application to configure the initial router settings.
For instructions on how to use CiscoCPExpress to configure the router see the CiscoCP Express User’s
Guide.
Cisco IOS CLI
To configure the initial router settings by using the CiscoIOS CLI, you will need to set up a console
connection. For instructions on how to setup a console connection, see the “Connecting a Terminal or
PC to the Console Port” section on page3-6.
To configure the initial router settings using CiscoIOS CLI, follow these steps:
Step1
Set up a console connection to your router. The following message is displayed:
...
router con0 is now available
Cisco IAD880 Series Integrated Access Device Hardware Installation Guide
OL
4-1
Chapter4 Initial Configuration
Cisco IOS CLI
Step2
Press Return or Enter. The following message is displayed:
Cisco Configuration Professional Express (Cisco CP Express) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco." The default username and password have a privilege level of 15.
Please change these publicly known initial credentials using Cisco CP Express or the Cisco
IOS CLI.
Here are the Cisco IOS commands.
username
no username cisco
Replace
For more information about Cisco CP please follow the instructions in the QUICK START
GUIDE for
...
User Access Verification
Username:
Step3
Enter the username cisco and press Return or Enter. The following prompt is displayed:
Password:
Step4
Enter the password cisco and press Return or Enter. The following prompt is displayed:
Router#
A message is displayed that is similar to the first warning message. The message directs you to change
the username and password.
You are now in privileged EXEC mode.
Note
You must change the username and password before you log off the router. You cannot use the
username cisco or password cisco after you log off from this session.
Step5
To change the username and password, enter the following at the prompt:
username username privilege 15 secret 0 password
Username and password are the username and password that you wish to use.
To continue using CiscoIOS CLI for initial configuration, see the applicable configuration procedures
in the Cisco860 Series and Cisco880 Series Integrated Services Routers Software Configuration Guide.
Note
Save your configuration changes regularly to avoid losing them during resets, power cycles, or
power outages. Use the copyrunning-config startup-config command at the privileged EXEC
mode prompt (Router#) to save the configuration to NVRAM.
Step6
Verify the initial configuration. See the “Verifying the Initial Configuration” section on page4-5.
Cisco IAD880 Series Integrated Access Device Hardware Installation Guide
OL
版权声明：本文标题：InitialConfiguration-Cisco初始配置思科 内容由网友自发贡献，该文观点仅代表作者本人， 转载请联系作者并注明出处：http://www.freenas.com.cn/jishu/1710783900h575143.html， 本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容，一经查实，本站将立刻删除。
发表评论