admin 管理员组文章数量: 887272
2023年12月22日发(作者:linux安装iso镜像文件)
Oracle 11g 静默安装-db_详解
前提安装正常的配置流程,配置完服务器后,将db_、,复制到/app/一份,然后参考后面静默配置文件修改好后安装
静默安装命令:
./runInstaller –silent –responseFile /app/db_ -showProgress
–noconfig –ignoreSysPrereqs
静默配置网络监听命令
./netca –silent –responseFile /app/
静默创建数据库命令
./dbca –silent –responseFile /app/
vi /etc/selinux/config
# 设置SELINUX为disabled
SELINUX=disabled
[root@oracle ~]# service iptables stop
####################################################################
## Copyright(c) Oracle Corporation1998,2008. All rights reserved. ##
## Specify values for the variables listedbelow to customize your
installation. ##
## Each variable is associated with acomment. The comment ##
## can help to populate the variables withthe appropriate values. ##
## IMPORTANT NOTE: This file contains plaintext passwords and ##
## should be secured to have readpermission only by oracle user ##
## or db administrator who owns thisinstallation. ##
##对整个文件的说明,该文件包含参数说明,静默文件中密码信息的保密 ##
####################################################################
#------------------------------------------------------------------------------
# Do not change the following system generatedvalue. 标注响应文件版本,这个版本必须和要#安装的数据库版本相同,安装检验无法通过,不能更改
#------------------------------------------------------------------------------
seFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0
#------------------------------------------------------------------------------
# Specify the installation option.
# It can be one of the following:
# 1. INSTALL_DB_SWONLY
# 2. INSTALL_DB_AND_CONFIG
# 3. UPGRADE_DB
#选择安装类型:1.只装数据库软件 2.安装数据库软件并建库 3.升级数据库
#-------------------------------------------------------------------------------
=INSTALL_DB_SWONLY
#-------------------------------------------------------------------------------
# Specify the hostname of the system as setduring the install. It can
be used
# to force the installation to use analternative hostname rather than
using the
# first hostname found on the system.(e.g., for systems with multiple
hostnames
# and network interfaces)指定操作系统主机名,通过hostname命令获得
#-------------------------------------------------------------------------------
ORACLE_HOSTNAME=dygisapp
#-------------------------------------------------------------------------------
# Specify the Unix group to be set for theinventory directory.
#指定oracle inventory目录的所有者,通常会是oinstall或者dba
#-------------------------------------------------------------------------------
UNIX_GROUP_NAME=oinstall
#-------------------------------------------------------------------------------
# Specify the location which holds theinventory files.
#指定产品清单oracle inventory目录的路径,如果是Win平台下可以省略
#-------------------------------------------------------------------------------
INVENTORY_LOCATION=/app/oracle/oraInventory
#-------------------------------------------------------------------------------
# Specify the languages in which thecomponents will be installed.
# en : English ja : Japanese
# fr : French ko : Korean
# ar : Arabic es : Latin American Spanish
# bn : Bengali lv : Latvian
# pt_BR: Brazilian Portuguese lt : Lithuanian
# bg : Bulgarian ms : Malay
# fr_CA: Canadian French es_MX: Mexican Spanish
# ca : Catalan no : Norwegian
# hr : Croatian pl : Polish
# cs : Czech pt : Portuguese
# da : Danish ro : Romanian
# nl : Dutch ru : Russian
# ar_EG: Egyptian zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk :Slovak
# et : Estonian sl : Slovenian
# fi : Finnish es_ES: Spanish
# de : German sv : Swedish
# el : Greek th : Thai
# iw : Hebrew zh_TW:Traditional Chinese
# hu : Hungarian tr : Turkish
# is : Icelandic uk : Ukrainian
# in : Indonesian vi :Vietnamese
# it : Italian
# Example : SELECTED_LANGUAGES=en,fr,ja
#指定数据库语言,可以选择多个,用逗号隔开。选择en, zh_CN(英文和简体中文)
#------------------------------------------------------------------------------
SELECTED_LANGUAGES=en,zh_CN
#------------------------------------------------------------------------------
# Specify the complete path of the OracleHome.设置ORALCE_HOME的路径
#------------------------------------------------------------------------------
ORACLE_HOME=/app/oracle/product/11.2.0.3/db_1
#------------------------------------------------------------------------------
# Specify the complete path of the OracleBase. 设置ORALCE_BASE的路径
#------------------------------------------------------------------------------
ORACLE_BASE=/app/oracle
#------------------------------------------------------------------------------
# Specify the installation edition of thecomponent.
# The value should contain only one ofthese choices.
# EE : EnterpriseEdition
# SE : Standard Edition
# SEONE Standard Edition One
# PE : Personal Edition (WINDOWS ONLY)
#选择Oracle安装数据库软件的版本(企业版,标准版,标准版1),不同的版本功能不同
#详细的版本区别参考附录D
#------------------------------------------------------------------------------
lEdition=EE
#------------------------------------------------------------------------------
# This variable is used to enable ordisable custom install.
# true : Components mentioned as part of 'customComponents' property
#are considered for install.
# false : Value for 'customComponents' isnot considered.
#是否自定义Oracle的组件,如果选择false,则会使用默认的组件
#如果选择true否则需要自己在下面一条参数将要安装的组件一一列出。
#安装相应版权后会安装所有的组件,后期如果缺乏某个组件,再次安装会非常的麻烦。
#------------------------------------------------------------------------------
omInstall=false
#------------------------------------------------------------------------------
# This variable is considered only if'IsCustomInstall' is set to true.
# Description: List of Enterprise EditionOptions you would like to
install.
# The following choices areavailable. You may specify any
# combination of thesechoices. The components you chooseshould
# be specified in the form"internal-component-name:version"
# Below is a list of components youmay specify to install.
# ioning:11.2.0.1.0- Oracle Partitioning
# :11.2.0.1.0- Oracle Data Mining
# :11.2.0.1.0- Oracle Database Vault
# :11.2.0.1.0- Oracle Label Security
# :11.2.0.1.0- Oracle Real Application Testing
# p:11.2.0.1.0- Oracle OLAP
# omInstall=true的话必须手工选择需要安装组件的话
#------------------------------------------------------------------------------
Components=:11.2.0.1.0,:10.2.7.0.0,:11.2.0.1.0,:11.2.0.1.0,k:11.2.0.1.0,er:11.2.0.1.0,:11.2.0.1.0,s:11.2.0.1.0,ioning:11.2.0.1.0,p:11.2.0.1.0,:11.2.0.1.0,:11.2.0.1.0,:11.2.0.1.0,:11.2.0.1.0
###############################################################################
# PRIVILEGED OPERATING SYSTEM GROUPS
# Provide values for the OS groups to whichOSDBA and OSOPER privileges
#
# needs to be granted. If the install isbeing performed as a member of
the #
# group "dba", then that will beused unless specified otherwise below.
#
#指定拥有OSDBA、OSOPER权限的用户组,通常会是dba组
###############################################################################
#------------------------------------------------------------------------------
# The DBA_GROUP is the OS group which is tobe granted OSDBA privileges.
#------------------------------------------------------------------------------
_GROUP=dba
#------------------------------------------------------------------------------
# The OPER_GROUP is the OS group which isto be granted OSOPER
privileges.
#------------------------------------------------------------------------------
_GROUP=oinstall
#------------------------------------------------------------------------------
# Specify the cluster node names selectedduring the installation.
#如果是RAC的安装,在这里指定所有的节点
#------------------------------------------------------------------------------
R_NODES=
#------------------------------------------------------------------------------
# Specify the type of database to create.
# It can be one of the following:
# - GENERAL_PURPOSE/TRANSACTION_PROCESSING
# - DATA_WAREHOUSE
#选择数据库的用途,一般用途/事物处理,数据仓库
#------------------------------------------------------------------------------
=GENERAL_PURPOSE
#------------------------------------------------------------------------------
# Specify the Starter Database GlobalDatabase Name. 指定GlobalName
#------------------------------------------------------------------------------
DBName=ora11g
#------------------------------------------------------------------------------
# Specify the Starter Database SID.指定SID
#------------------------------------------------------------------------------
=ora11g
#------------------------------------------------------------------------------
# Specify the Starter Database characterset.
# It can be one of the following:
# AL32UTF8, WE8ISO8859P15, WE8MSWIN1252,EE8ISO8859P2,
# EE8MSWIN1250, NE8ISO8859P10,NEE8ISO8859P4, BLT8MSWIN1257,
# BLT8ISO8859P13, CL8ISO8859P5,CL8MSWIN1251, AR8ISO8859P6,
# AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253,IW8ISO8859P8,
# IW8MSWIN1255, JA16EUC, JA16EUCTILDE,JA16SJIS, JA16SJISTILDE,
# KO16MSWIN949, ZHS16GBK, TH8TISASCII,ZHT32EUC, ZHT16MSWIN950,
# ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254,VN8MSWIN1258
#选择字符集。不正确的字符集会给数据显示和存储带来麻烦无数。
#通常中文选择的有ZHS16GBK简体中文库,建议选择unicode的AL32UTF8国际字符集
#------------------------------------------------------------------------------
terSet=AL32UTF8
#------------------------------------------------------------------------------
# This variable should be set to true ifAutomatic Memory Management
# in Database is desired.
# If Automatic Memory Management is notdesired, and memory allocation
# is to be done manually, then set it tofalse.
#11g的新特性自动内存管理,也就是SGA_TARGET和PAG_AGGREGATE_TARGET都#不用设置了,Oracle会自动调配两部分大小。
#------------------------------------------------------------------------------
Option=true
#------------------------------------------------------------------------------
# Specify the total memory allocation forthe database. Value(in MB)
should be
# at least 256 MB, and should not exceedthe total physical memory
available on the system.
# Example:Limit=512
#指定Oracle自动管理内存的大小,最小是256MB
#------------------------------------------------------------------------------
Limit=
#------------------------------------------------------------------------------
# This variable controls whether to loadExample Schemas onto the
starter
# database or not.是否载入模板示例
#------------------------------------------------------------------------------
lExampleSchemas=false
#------------------------------------------------------------------------------
# This variable includes enabling auditsettings, configuring password
profiles
# and revoking some grants to public. Thesesettings are provided by
default.
# These settings may also be disabled. 是否启用安全设置
#------------------------------------------------------------------------------
SecuritySettings=true
###############################################################################
# Passwords can be supplied for thefollowing four schemas in the #
# starter database: #
# SYS #
# SYSTEM #
# SYSMAN (used by Enterprise Manager) #
# DBSNMP (used by Enterprise Manager) #
# Same password can be used for allaccounts (not recommended) #
# or different passwords for each accountcan be provided (recommended)
#
#设置数据库用户密码
###############################################################################
#------------------------------------------------------------------------------
# This variable holds the password that isto be used for all schemas
in the
# starter database.
#设定所有数据库用户使用同一个密码,其它数据库用户就不用单独设置了。
#-------------------------------------------------------------------------------
=oracle
#-------------------------------------------------------------------------------
# Specify the SYS password for the starterdatabase.
#-------------------------------------------------------------------------------
=
#-------------------------------------------------------------------------------
# Specify the SYSTEM password for thestarter database.
#-------------------------------------------------------------------------------
=
#-------------------------------------------------------------------------------
# Specify the SYSMAN password for thestarter database.
#-------------------------------------------------------------------------------
=
#-------------------------------------------------------------------------------
# Specify the DBSNMP password for thestarter database.
#-------------------------------------------------------------------------------
=
#-------------------------------------------------------------------------------
# Specify the management option to beselected for the starter database.
# It can be one of the following:
# 1. GRID_CONTROL
# 2. DB_CONTROL
#数据库本地管理工具DB_CONTROL,远程集中管理工具GRID_CONTROL
#-------------------------------------------------------------------------------
l=DB_CONTROL
#-------------------------------------------------------------------------------
# Specify the Management Service to use ifGrid Control is selected to
manage
# the database. GRID_CONTROL需要设定grid control的远程路径URL
#-------------------------------------------------------------------------------
ntrolServiceURL=
#-------------------------------------------------------------------------------
# This variable indicates whether toreceive email notification for
critical
# alerts when using DB control.是否启用Email通知, 启用后会将告警等信息发送到指定邮箱
#-------------------------------------------------------------------------------
EmailNotification=false
#-------------------------------------------------------------------------------
# Specify the email address to which thenotifications are to be sent.设置通知EMAIL地址
#-------------------------------------------------------------------------------
ddress=
#-------------------------------------------------------------------------------
# Specify the SMTP server used for emailnotifications.设置EMAIL邮件服务器
#-------------------------------------------------------------------------------
rver=
###############################################################################
# SPECIFY BACKUP AND RECOVERY OPTIONS #
# Out-of-box backup and recovery optionsfor the database can be
mentioned #
# using the entries below. #
#安全及恢复设置(默认值即可)out-of-box(out-of-box experience)缩写为OOBE
#产品给用产品给用户良好第一印象和使用感受
###############################################################################
#------------------------------------------------------------------------------
# This variable is to be set to false ifautomated backup is not
required. Else
# this can be set to true.设置自动备份,和OUI里的自动备份一样。
#------------------------------------------------------------------------------
=false
#------------------------------------------------------------------------------
# Regardless of the type of storage that ischosen for backup and
recovery, if
# automated backups are enabled, a job willbe scheduled to run daily
at
# 2:00 AM to backup the database. This jobwill run as the operating
system
# user that is specified in this variable.自动备份会启动一个job,指定启动JOB的系统用户ID
#------------------------------------------------------------------------------
=
#-------------------------------------------------------------------------------
# Regardless of the type of storage that ischosen for backup and
recovery, if
# automated backups are enabled, a job willbe scheduled to run daily
at
# 2:00 AM to backup the database. This jobwill run as the operating
system user
# specified by the above entry. Thefollowing entry stores the password
for the
# above operating system user.自动备份会开启一个job,需要指定OSUser的密码
#-------------------------------------------------------------------------------
=
#-------------------------------------------------------------------------------
# Specify the type of storage to use forthe database.
# It can be one of the following:
# - FILE_SYSTEM_STORAGE
# - ASM_STORAGE
#自动备份,要求指定使用的文件系统存放数据库文件还是ASM
#------------------------------------------------------------------------------
eType=
#-------------------------------------------------------------------------------
# Specify the database file location whichis a directory for datafiles,
control
# files, redo logs.
# Applicable only when
e=FILE_SYSTEM
#使用文件系统存放数据库文件才需要指定数据文件、控制文件、Redo log的存放目录
#-------------------------------------------------------------------------------
cation=
#-------------------------------------------------------------------------------
# Specify the backup and recovery location.
# Applicable only
e=FILE_SYSTEM
#使用文件系统存放数据库文件才需要指定备份恢复目录
#-------------------------------------------------------------------------------
ryLocation=
#-------------------------------------------------------------------------------
# Specify the existing ASM disk groups tobe used for storage.
# Applicable only e=ASM
#使用ASM存放数据库文件才需要指定存放的磁盘组
#-------------------------------------------------------------------------------
oup=
#-------------------------------------------------------------------------------
# Specify the password for ASMSNMP user ofthe ASM instance.
# Applicable only
e=ASM_SYSTEM
#使用ASM存放数据库文件才需要指定ASM实例密码
#-------------------------------------------------------------------------------
PPassword=
#------------------------------------------------------------------------------
# Specify the My Oracle Support AccountUsername.
# Example :MYORACLESUPPORT_USERNAME=metalink
#指定metalink账户用户名
#------------------------------------------------------------------------------
MYORACLESUPPORT_USERNAME=
#------------------------------------------------------------------------------
# Specify the My Oracle Support AccountUsername password.
# Example : MYORACLESUPPORT_PASSWORD=password
# 指定metalink账户密码
#------------------------------------------------------------------------------
MYORACLESUPPORT_PASSWORD=
#------------------------------------------------------------------------------
# Specify whether to enable the user to setthe password for
# My Oracle Support credentials. The valuecan be either true or false.
# If left blank it will be assumed to befalse.
# Example : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
# 用户是否可以设置metalink密码
#------------------------------------------------------------------------------
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
#------------------------------------------------------------------------------
# Specify whether user wants to give anyproxy details for connection.
# The value can be either true or false. Ifleft blank it will be
assumed to be false.
# Example : DECLINE_SECURITY_UPDATES=false
# False表示不需要设置安全更新,注意,在11.2的静默安装中疑似有一个BUG
# Response File中必须指定为true,否则会提示错误,不管是否正确填写了邮件地址
#------------------------------------------------------------------------------
DECLINE_SECURITY_UPDATES=true
#------------------------------------------------------------------------------
# Specify the Proxy server name. Lengthshould be greater than zero.
#代理服务器名
# Example : PROXY_HOST=
#------------------------------------------------------------------------------
PROXY_HOST=
#------------------------------------------------------------------------------
# Specify the proxy port number. Should beNumeric and atleast 2 chars.
#代理服务器端口
# Example : PROXY_PORT=25
#------------------------------------------------------------------------------
PROXY_PORT=
#------------------------------------------------------------------------------
# Specify the proxy user name. LeavePROXY_USER and PROXY_PWD
# blank if your proxy server requires noauthentication.
#代理服务器用户名
# Example : PROXY_USER=username
#------------------------------------------------------------------------------
PROXY_USER=
#------------------------------------------------------------------------------
# Specify the proxy password. LeavePROXY_USER and PROXY_PWD
# blank if your proxy server requires noauthentication.
#代理服务器密码
# Example : PROXY_PWD=password
#------------------------------------------------------------------------------
PROXY_PWD=
###############################################################
## Copyright(c) Oracle Corporation 2002. All rights reserved.##
## ##
## Specify values for the variables listed below to customize##
## your installation. ##
## ##
## Each variable is associated with a comment. The comment ##
## identifies the variable type. ##
## ##
## Please specify the values in the following format: ##
## ##
## Type Example ##
## String "Sample Value" ##
## Boolean True or False ##
## Number 1000 ##
## StringList {"String value 1","String Value 2"} ##
## ##
###############################################################
## ##
## This sample response file causes the Oracle Net ##
## Configuration Assistant (NetCA) to complete an Oracle Net ##
## configuration during a custom install of the Oracle11g ##
## server which is similar to what would be created by the ##
## NetCA during typical Oracle11g install. It also documents ##
## all of the NetCA response files variables so you can ##
## create your own response file to configure Oracle Net ##
## during an install the way you wish. ##
## ##
###############################################################
[GENERAL]
RESPONSEFILE_VERSION="11.2"
CREATE_TYPE="CUSTOM"
#-------------------------------------------------------------------------------
# Name : SHOW_GUI
# Datatype : Boolean
# Description: This variable controls appearance/suppression of the NetCA
GUI,
# Pre-req : N/A
# Default : TRUE
# Note:
# This must be set to false in order to run NetCA in silent mode.
# This is a substitute of "/silent" flag in the NetCA command line.
# The command line flag has precedence over the one in this response file.
# This feature is present since 10.1.0.3.
#-------------------------------------------------------------------------------
#SHOW_GUI=false
#-------------------------------------------------------------------------------
# Name : LOG_FILE
# Datatype : String
# Description: If present, NetCA will log output to this file in addition
to the
# standard out.
# Pre-req : N/A
# Default : NONE
# Note:
# This is a substitute of "/log" in the NetCA command line.
# The command line argument has precedence over the one in this response
file.
# This feature is present since 10.1.0.3.
#-------------------------------------------------------------------------
------
#LOG_FILE=""/oracle11gHome/network/tools/log/""
[]
#INSTALLED_COMPONENTS;StringList;list of installed components
# The possible values for installed components are:
# "net8","server","client","aso", "cman", "javavm"
INSTALLED_COMPONENTS={"server","net8","javavm"}
#INSTALL_TYPE;String;type of install
# The possible values for install type are:
# "typical","minimal" or "custom"
INSTALL_TYPE=""custom""
#LISTENER_NUMBER;Number;Number of Listeners
# A typical install sets one listener
LISTENER_NUMBER=1
#LISTENER_NAMES;StringList;list of listener names
# The values for listener are:
# "LISTENER","LISTENER1","LISTENER2","LISTENER3", ...
# A typical install sets only "LISTENER"
LISTENER_NAMES={"LISTENER"}
#LISTENER_PROTOCOLS;StringList;list of listener addresses (protocols and
parameters separated by semicolons)
# The possible values for listener protocols are:
# "TCP;1521","TCPS;2484","NMP;ORAPIPE","IPC;IPCKEY","VI;1521"
# A typical install sets only "TCP;1521"
LISTENER_PROTOCOLS={"TCP;1521"}
#LISTENER_START;String;name of the listener to start, in double quotes
LISTENER_START=""LISTENER""
#NAMING_METHODS;StringList;list of naming methods
# The possible values for naming methods are:
# LDAP, TNSNAMES, ONAMES, HOSTNAME, NOVELL, NIS, DCE
# A typical install sets only: "TNSNAMES","ONAMES","HOSTNAMES"
# or "LDAP","TNSNAMES","ONAMES","HOSTNAMES" for LDAP
NAMING_METHODS={"TNSNAMES","ONAMES","HOSTNAME"}
#NOVELL_NAMECONTEXT;String;Novell Directory Service name context, in
double quotes
# A typical install does not use this variable.
#NOVELL_NAMECONTEXT = ""NAMCONTEXT""
#SUN_METAMAP;String; SUN meta map, in double quotes
# A typical install does not use this variable.
#SUN_METAMAP = ""MAP""
#DCE_CELLNAME;String;DCE cell name, in double quotes
# A typical install does not use this variable.
#DCE_CELLNAME = ""CELL""
#NSN_NUMBER;Number;Number of NetService Names
# A typical install sets one net service name
NSN_NUMBER=1
#NSN_NAMES;StringList;list of Net Service names
# A typical install sets net service name to "EXTPROC_CONNECTION_DATA"
NSN_NAMES={"EXTPROC_CONNECTION_DATA"}
#NSN_SERVICE;StringList;Oracle11g database's service name
# A typical install sets Oracle11g database's service name to "PLSExtProc"
NSN_SERVICE={"PLSExtProc"}
#NSN_PROTOCOLS;StringList;list of coma separated strings of Net Service
Name protocol parameters
# The possible values for net service name protocol parameters are:
#
"TCP;HOSTNAME;1521","TCPS;HOSTNAME;2484","NMP;COMPUTERNAME;ORAPIPE","VI;HOSTNAME;1521","IPC;IPCKEY"
# A typical install sets parameters to "IPC;EXTPROC"
NSN_PROTOCOLS={"TCP;HOSTNAME;1521"}
##############################################################################
##
##
##
DBCA response
file
##
##
------------------
##
## Copyright 1998, 2007, Oracle Corporation. All
Rights Reserved. ##
##
##
## Specify values for the variables listed below to
customize Oracle ##
## Database Configuration
installation.
##
##
##
## Each variable is associated with a comment. The
comment identifies the ##
## variable
type.
##
##
##
## Please specify the values in the following
format : ##
##
##
##
False
##
value>
##
e2>"}
##
##
##
##
##
: Example
"
True or
Type String : Boolean : Number : ## StringList : {" ## ## Examples : ## ## 1. dbca -progress_only -responseFile ## Display a progress bar depicting progress of database creation ## ## process. ## ## ## ## 2. dbca -silent -responseFile file> ## ## Creates database silently. No user interface is displayed. ## ## ## ## 3. dbca -silent -createDatabase -cloneTemplate ## ## -responseFile file> ## ## Creates database silently with clone template. The template in ## ## responsefile is a clone template. ## ## ## ## 4. dbca -silent -deleteDatabase -responseFile ## Deletes database silently. ## ############################################################################## #----------------------------------------------------------------------------- # GENERAL section is required for all types of database creations. #----------------------------------------------------------------------------- [GENERAL] #----------------------------------------------------------------------------- # Name : RESPONSEFILE_VERSION # Datatype : String # Description : Version of the database to create # Valid values : "11.1.0" # Default value : None # Mandatory : Yes 响应模板文件版本 #----------------------------------------------------------------------------- RESPONSEFILE_VERSION = "11.2.0" #----------------------------------------------------------------------------- # Name : OPERATION_TYPE # Datatype : String # Description : Type of operation # Valid values : "createDatabase" "createTemplateFromDB" "createCloneTemplate" "deleteDatabase" "configureDatabase" "addInstance" (RAC-only) "deleteInstance" (RAC-only) # Default value : None # Mandatory : Yes 操作类型为创建数据库 #----------------------------------------------------------------------------- OPERATION_TYPE = "createDatabase" #-----------------------*** End of GENERAL section ***------------------------ #----------------------------------------------------------------------------- # CREATEDATABASE section is used when OPERATION_TYPE is defined as "createDatabase". #----------------------------------------------------------------------------- [CREATEDATABASE] #----------------------------------------------------------------------------- # Name : GDBNAME # Datatype : String # Description : Global database name of the database # Valid values : database domain isn't NULL # - when database domain is NULL # Default value : None # Mandatory : Yes 配置数据库名称 #----------------------------------------------------------------------------- GDBNAME = "" #----------------------------------------------------------------------------- # Name : POLICYMANAGED # Datatype : Boolean # Description : Set to true if Database is policy managed and # set to false if Database is admin managed # Valid values : TRUEFALSE # Default value : FALSE # Mandatory : No #----------------------------------------------------------------------------- #POLICYMANAGED = "false" #----------------------------------------------------------------------------- # Name : CREATESERVERPOOL # Datatype : Boolean # Description : Set to true if new server pool need to be created for database # if this option is specified then the newly created database # will use this newly created serverpool. # Multiple serverpoolname can not be specified for database # Valid values : TRUEFALSE # Default value : FALSE # Mandatory : No #----------------------------------------------------------------------------- #CREATESERVERPOOL = "false" #----------------------------------------------------------------------------- # Name : FORCE # Datatype : Boolean # Description : Set to true if new server pool need to be created by force # if this option is specified then the newly created serverpool # will be assigned server even if no free servers are available. # This may affect already running database. # This flag can be specified for Admin managed as well as policy managed db. # Valid values : TRUEFALSE # Default value : FALSE # Mandatory : No #----------------------------------------------------------------------------- #FORCE = "false" #----------------------------------------------------------------------------- # Name : SERVERPOOLNAME # Datatype : String # Description : Only one serverpool name need to be specified # if Create Server Pool option is specified. # Comma-separated list of Serverpool names if db need to use # multiple Server pool # Valid values : ServerPool name # Default value : None # Mandatory : No [required in case of RAC service centric database] #----------------------------------------------------------------------------- #SERVERPOOLNAME = #----------------------------------------------------------------------------- # Name : CARDINALITY # Datatype : Number # Description : Specify Cardinality for create server pool operation # Valid values : any positive Integer value # Default value : Number of qualified nodes on cluster # Mandatory : No [Required when a new serverpool need to be created] #----------------------------------------------------------------------------- #CARDINALITY = #----------------------------------------------------------------------------- # Name : SID # Datatype : String # Description : System identifier (SID) of the database # Valid values : Check Oracle11g Administrator's Guide # Default value : # Mandatory : No #----------------------------------------------------------------------------- SID = "ora11g" #----------------------------------------------------------------------------- # Name : NODELIST # Datatype : String # Description : Comma-separated list of cluster nodes # Valid values : Cluster node names # Default value : None # Mandatory : No (Yes for RAC database-centric database ) #----------------------------------------------------------------------------- #NODELIST= #----------------------------------------------------------------------------- # Name : TEMPLATENAME # Datatype : String # Description : Name of the template # Valid values : Template file name # Default value : None # Mandatory : Yes #----------------------------------------------------------------------------- TEMPLATENAME = "General_" #----------------------------------------------------------------------------- # Name : OBFUSCATEDPASSWORDS # Datatype : Boolean # Description : Set to true if passwords are encrypted # Valid values : TRUEFALSE # Default value : FALSE # Mandatory : No #----------------------------------------------------------------------------- #OBFUSCATEDPASSWORDS = FALSE #----------------------------------------------------------------------------- # Name : SYSPASSWORD # Datatype : String # Description : Password for SYS user # Valid values : Check Oracle11g Administrator's Guide # Default value : None # Mandatory : Yes #----------------------------------------------------- ------------------------ #SYSPASSWORD = "password" #----------------------------------------------------------------------------- # Name : SYSTEMPASSWORD # Datatype : String # Description : Password for SYSTEM user # Valid values : Check Oracle11g Administrator's Guide # Default value : None # Mandatory : Yes #----------------------------------------------------------------------------- #SYSTEMPASSWORD = "password" #----------------------------------------------------------------------------- # Name : EMCONFIGURATION # Datatype : String # Description : Enterprise Manager Configuration Type # Valid values : CENTRAL|LOCAL|ALL|NOBACKUP|NOEMAIL|NONE # Default value : NONE # Mandatory : No #----------------------------------------------------------------------------- #EMCONFIGURATION = "NONE" #----------------------------------------------------------------------------- # Name : DISABLESECURITYCONFIGURATION # Datatype : String # Description : Database Security Settings # Valid values : ALL|NONE|AUDIT|PASSWORD_PROFILE # Default value : NONE # Mandatory : No #----------------------------------------------------------------------------- #DISABLESECURITYCONFIGURATION = "NONE" #----------------------------------------------------------------------------- # Name : SYSMANPASSWORD # Datatype : String # Description : Password for SYSMAN user # Valid values : Check Oracle11g Administrator's Guide # Default value : None # Mandatory : Yes, if LOCAL specified for EMCONFIGURATION #----------------------------------------------------------------------------- #SYSMANPASSWORD = "password" #----------------------------------------------------------------------------- # Name : DBSNMPPASSWORD # Datatype : String # Description : Password for DBSNMP user # Valid values : Check Oracle11g Administrator's Guide # Default value : None # Mandatory : Yes, if EMCONFIGURATION is specified #----------------------------------------------------------------------------- #DBSNMPPASSWORD = "password" #----------------------------------------------------------------------------- # Name : CENTRALAGENT # Datatype : String # Description : Grid Control Central Agent Oracle Home # Default value : None # Mandatory : Yes, if CENTRAL is specified for EMCONFIGURATION #----------------------------------------------------------------------------- #CENTRALAGENT = #----------------------------------------------------------------------------- # Name : HOSTUSERNAME # Datatype : String # Description : Host user name for EM backup job # Default value : None # Mandatory : Yes, if ALL or NOEMAIL are specified for EMCONFIGURATION #-----------------------------------------------------
版权声明:本文标题:Oracle 11g 静默安装-db_install.rsp详解 内容由网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:http://www.freenas.com.cn/free/1703188656h441539.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论