admin 管理员组文章数量: 887019
U-Boot 2024.04 (Jul 21 2024 - 18:20:25 +0800)
CPU: i.MX6ULL rev1.1 792 MHz (running at 396 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 34C hnlyxacj@163
Reset cause: POR
Model: i.MX6ULL 14x14 EVK Board hnlyxacj@163
Board: MX6ULL 14x14 EVK hnlyxacj@163
DRAM: 512 MiB
Core: 76 devices, 22 uclasses, devicetree: separate
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
[*]-Video Link 0 (800 x 480)
[0] lcdif@21c8000, video
In: serial
Out: serial
Err: serial
switch to partitions #0, OK
mmc0 is current device
flash target is MMC:0
Net: eth1: ethernet@20b4000 [PRIME]
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot: 0
ethernet@20b4000 Waiting for PHY auto negotiation to complete.... done
Using ethernet@20b4000 device
TFTP from server 10.20.18.55; our IP address is 10.20.18.144
Filename 'zImage'.
Load address: 0x80800000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#########################################
396.5 KiB/s
done
Bytes transferred = 6312760 (605338 hex)
Using ethernet@20b4000 device
TFTP from server 10.20.18.55; our IP address is 10.20.18.144
Filename 'imx6ull-14x14-evk.dtb'.
Load address: 0x83000000
Loading: ####
376 KiB/s
done
Bytes transferred = 45905 (b351 hex)
Kernel image @ 0x80800000 [ 0x000000 - 0x605338 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Working FDT set to 83000000
Using Device Tree in place at 83000000, end 8300e350
Working FDT set to 83000000
Modify /soc/bus@2200000/epdc@228c000 disabled
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 6.6.23 (dev@dev-lab) (arm-imx6ull-linux-gnueabihf-gcc.br_real (Buildroot -g932b52fa-dirty) 14.1.0, GNU ld (GNU Binutils) 2.42) #26 SMP PREEMPT Fri Jul 26 17:27:12 CST 2024
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt: Machine model: Freescale i.MX6 ULL 14x14 EVK Board
Memory policy: Data cache writealloc
Reserved memory: created CMA memory pool at 0x96000000, size 160 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
OF: reserved mem: 0x96000000..0x9fffffff (163840 KiB) map reusable linux,cma
Zone ranges:
Normal [mem 0x0000000080000000-0x000000009fffffff]
HighMem empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080000000-0x000000009fffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
percpu: Embedded 12 pages/cpu s18900 r8192 d22060 u49152
Kernel command line: console=ttymxc0,115200 root=/dev/nfs nolock rw nfsroot=10.20.18.55:/home/dev/Documents/dev/buildroot/output/target,tcp,v4 ip=10.20.18.144:10.20.18.55:10.20.18.1:255.255.255.0::eth0 on
Unknown kernel command line parameters "nolock on", will be passed to user space.
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Built 1 zonelists, mobility grouping on. Total pages: 129920
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
Memory: 333636K/524288K available (13312K kernel code, 1371K rwdata, 4436K rodata, 1024K init, 424K bss, 26812K reserved, 163840K cma-reserved, 0K highmem)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
Trampoline variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
Switching to timer-based delay loop, resolution 41ns
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
CPU: Testing write buffer coherency: ok
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
Setting up static identity map for 0x80100000 - 0x80100060
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 1 CPU
SMP: Total of 1 processors activated (48.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
Duplicate name in lcdif@21c8000, renamed to "display#1"
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: 2, 16384 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 256 KiB pool for atomic coherent allocations
thermal_sys: Registered thermal governor 'step_wise'
cpuidle: using governor menu
CPU identified as i.MX6ULL, silicon rev 1.1
platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000
platform 20dc000.gpc: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000
failed to find ocotp node
No ATAGs?
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
imx6ul-pinctrl 20e0000.pinctrl: Invalid fsl,pins or pins property in node /soc/bus@2000000/pinctrl@20e0000/ft5406
imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver
imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000
imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver
imx mu driver is registered.
imx rpmsg driver is registered.
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c i2c-0: IMX I2C adapter registered
imx-i2c 21a4000.i2c: error -6: IRQ index 0 not found
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
MIPI CSI2 driver module loaded
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
vgaarb: loaded
clocksource: Switched to clocksource mxc_timer1
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NET: Registered PF_INET protocol family
IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Bus freq driver module loaded
Initialise system trusted keyrings
workingset: timestamp_bits=14 max_order=17 bucket_order=3
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse: init (API version 7.39)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
mxsfb 21c8000.lcdif: supply lcd not found, using dummy regulator
sii902x bound to mxs-lcdif from 21c8000.lcdif
Console: switching to colour frame buffer device 100x30
mxsfb 21c8000.lcdif: initialized
mxs-dma 1804000.dma-controller: initialized
2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 199, base_baud = 5000000) is a IMX
printk: console [ttymxc0] enabled
21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 200, base_baud = 5000000) is a IMX
serial serial0: tty port ttymxc1 registered
imx_rngc 2284000.rng: Freescale RNGB registered (HW revision 2.129)
random: crng init done
imx sema4 driver is registered.
brd: module loaded
loop: module loaded
spi-nor spi4.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
tun: Universal TUN/TAP device driver, 1.6
CAN device driver interface
pps pps0: new PPS source ptp0
fec 20b4000.ethernet eth0: registered PHC device 0
imx6ul-pinctrl 20e0000.pinctrl: pin MX6UL_PAD_RESERVE14 already requested by 20b4000.ethernet; cannot claim for 2188000.ethernet
imx6ul-pinctrl 20e0000.pinctrl: pin-14 (2188000.ethernet) status -22
imx6ul-pinctrl 20e0000.pinctrl: could not request pin 14 (MX6UL_PAD_RESERVE14) from group enet1grp on device 20e0000.pinctrl
fec 2188000.ethernet: Error applying setting, reverse things back
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
usbcore: registered new device driver r8152-cfgselector
usbcore: registered new interface driver r8152
usbcore: registered new interface driver lan78xx
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver r8153_ecm
usbcore: registered new interface driver usb-storage
imx_usb 2184000.usb: No over current polarity defined
ci_hdrc ci_hdrc.1: EHCI Host Controller
ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 6.6.23 ehci_hcd
usb usb1: SerialNumber: ci_hdrc.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
input: 20cc000.snvs:snvs-powerkey as /devices/platform/soc/2000000.bus/20cc000.snvs/20cc000.snvs:snvs-powerkey/input/input0
SPI driver ads7846 has no spi_device_id for ti,tsc2046
SPI driver ads7846 has no spi_device_id for ti,ads7843
SPI driver ads7846 has no spi_device_id for ti,ads7845
SPI driver ads7846 has no spi_device_id for ti,ads7873
snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0
snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0)
i2c_dev: i2c /dev entries driver
pxp-v4l2 pxp_v4l2: initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Marvell registered
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-esdhc-imx 2190000.mmc: Got CD GPIO
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mma8452 0-001e: mounting matrix not found: using identity...
mma8452 0-001e: supply vdd not found, using dummy regulator
mma8452 0-001e: supply vddio not found, using dummy regulator
mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA
mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA
NET: Registered PF_LLC protocol family
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered PF_PACKET protocol family
can: controller area network core
mmc0: host does not support reading read-only switch, assuming write-enable
NET: Registered PF_CAN protocol family
can: raw protocol
can: broadcast manager protocol
usb 1-1: new high-speed USB device number 2 using ci_hdrc
can: netlink gateway - max_hops=1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
mmc0: new ultra high speed SDR104 SDHC card at address 0001
mmcblk0: mmc0:0001 SD 14.6 GiB
mmcblk0: p1 p2
Registering SWP/SWPB emulation handler
Loading compiled-in X.509 certificates
imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C
usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
mmc1: new DDR MMC card at address 0001
mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
mmcblk1: p1 p2
mmcblk1boot0: mmc1:0001 8GTF4R 4.00 MiB
SMSC LAN8710/LAN8720 20b4000.ethernet-1:01: attached PHY driver (mii_bus:phy_addr=20b4000.ethernet-1:01, irq=POLL)
mmcblk1boot1: mmc1:0001 8GTF4R 4.00 MiB
mmcblk1rpmb: mmc1:0001 8GTF4R 512 KiB, chardev (242:0)
usb 1-1.1: new high-speed USB device number 3 using ci_hdrc
usb 1-1.1: New USB device found, idVendor=32e4, idProduct=4801, bcdDevice= 1.13
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: 48MP USB Camera
usb 1-1.1: Manufacturer: 48M USB Camera
usb 1-1.1: SerialNumber: HU123456
fec 20b4000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IP-Config: Complete:
device=eth0, hwaddr=82:67:83:9e:5d:e4, ipaddr=10.20.18.144, mask=255.255.255.0, gw=10.20.18.1
host=10.20.18.144, domain=, nis-domain=(none)
bootserver=10.20.18.55, rootserver=10.20.18.55, rootpath=
clk: Disabling unused clocks
ALSA device list:
No soundcards found.
VFS: Mounted root (nfs4 filesystem) on device 0:22.
devtmpfs: mounted
Freeing unused kernel image (initmem) memory: 1024K
Run /sbin/init as init process
systemd[1]: System time before build time, advancing clock.
systemd[1]: systemd 252.26-1~deb12u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture arm.
Welcome to Armbian 24.5.3 bookworm!
systemd[1]: Hostname set to <orangepione>.
platform sound-wm8960: deferred probe pending
platform 202c000.sai: deferred probe pending
platform 2090000.can: deferred probe pending
platform 2094000.can: deferred probe pending
platform regulator-can-3v3: deferred probe pending
systemd[1]: Queued start job for default target graphical.target.
systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ OK ] Created slice system-getty.slice - Slice /system/getty.
systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ OK ] Created slice system-modpr…lice - Slice /system/modprobe.
systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ OK ] Created slice system-seria… - Slice /system/serial-getty.
systemd[1]: Created slice user.slice - User and Session Slice.
[ OK ] Created slice user.slice - User and Session Slice.
systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ OK ] Started systemd-ask-passwo…quests to Console Directory Watch.
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ OK ] Started systemd-ask-passwo… Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount proc-sys-…rmats File System Automount Point.
systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0...
Expecting device dev-ttyS0.device - /dev/ttyS0...
systemd[1]: Expecting device dev-ttymxc0.device - /dev/ttymxc0...
Expecting device dev-ttymxc0.device - /dev/ttymxc0...
systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ OK ] Reached target cryptsetup.…get - Local Encrypted Volumes.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ OK ] Reached target integrityse…Local Integrity Protected Volumes.
systemd[1]: Reached target paths.target - Path Units.
[ OK ] Reached target paths.target - Path Units.
systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ OK ] Reached target remote-fs.target - Remote File Systems.
systemd[1]: Reached target slices.target - Slice Units.
[ OK ] Reached target slices.target - Slice Units.
systemd[1]: Reached target swap.target - Swaps.
[ OK ] Reached target swap.target - Swaps.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ OK ] Reached target veritysetup… - Local Verity Protected Volumes.
systemd[1]: Listening on syslog.socket - Syslog Socket.
[ OK ] Listening on syslog.socket - Syslog Socket.
systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ OK ] Listening on systemd-fsckd…sck to fsckd communication Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ OK ] Listening on systemd-initc… initctl Compatibility Named Pipe.
systemd[1]: systemd-journald-audit.socket - Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit).
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ OK ] Listening on systemd-journ…t - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ OK ] Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
[ OK ] Listening on systemd-netwo… - Network Service Netlink Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ OK ] Listening on systemd-udevd….socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ OK ] Listening on systemd-udevd…l.socket - udev Kernel Socket.
systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
Mounting dev-mqueue.mount▒▒POSIX Message Queue File System...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
Mounting sys-kernel-debug.… - Kernel Debug File System...
systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
Starting fake-hwclock.serv…estore / save the current clock...
systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
Starting keyboard-setup.se…Set the console keyboard layout...
systemd[1]: kmod-static-nodes.service - Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/6.6.23/modules.devname).
systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
Starting modprobe@configfs…m - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod...
systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
Starting modprobe@drm.service - Load Kernel Module drm...
systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
Starting modprobe@efi_psto…- Load Kernel Module efi_pstore...
systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
Starting modprobe@fuse.ser…e - Load Kernel Module fuse...
systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
Starting modprobe@loop.ser…e - Load Kernel Module loop...
systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
Starting systemd-modules-l…rvice - Load Kernel Modules...
systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line...
Starting systemd-network-g… units from Kernel command line...
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
Starting systemd-remount-f…nt Root and Kernel File Systems...
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
Starting systemd-udev-trig…[0m - Coldplug All udev Devices...
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ OK ] Mounted dev-mqueue.mount▒▒- POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ OK ] Mounted sys-kernel-debug.m…nt - Kernel Debug File System.
systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[ OK ] Finished fake-hwclock.serv… Restore / save the current clock.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ OK ] Finished modprobe@configfs…[0m - Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod.
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ OK ] Finished modprobe@drm.service - Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore.
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse.
systemd[1]: modprobe@loop.service: Deactivated successfully.
systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ OK ] Finished modprobe@loop.service - Load Kernel Module loop.
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ OK ] Finished systemd-modules-l…service - Load Kernel Modules.
systemd[1]: systemd-network-generator.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: systemd-network-generator.service: Failed with result 'exit-code'.
systemd[1]: Failed to start systemd-network-generator.service - Generate network units from Kernel command line.
[FAILED] Failed to start systemd-ne…rk units from Kernel command line.
See 'systemctl status systemd-network-generator.service' for details.
systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ OK ] Finished keyboard-setup.se…- Set the console keyboard layout.
systemd[1]: Reached target network-pre.target - Preparation for Network.
[ OK ] Reached target network-pre…get - Preparation for Network.
systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
Mounting sys-fs-fuse-conne… - FUSE Control File System...
systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
Mounting sys-kernel-config…ernel Configuration File System...
systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
Starting systemd-sysctl.se…ce - Apply Kernel Variables...
systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ OK ] Mounted sys-fs-fuse-connec…nt - FUSE Control File System.
systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ OK ] Mounted sys-kernel-config.… Kernel Configuration File System.
systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ OK ] Finished systemd-sysctl.service - Apply Kernel Variables.
systemd[1]: systemd-remount-fs.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: systemd-remount-fs.service: Failed with result 'exit-code'.
systemd[1]: Failed to start systemd-remount-fs.service - Remount Root and Kernel File Systems.
[FAILED] Failed to start systemd-re…ount Root and Kernel File Systems.
See 'systemctl status systemd-remount-fs.service' for details.
systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
Starting systemd-random-se…ice - Load/Save Random Seed...
systemd[1]: Starting systemd-sysusers.service - Create System Users...
Starting systemd-sysusers.…rvice - Create System Users...
systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
[ OK ] Finished systemd-random-se…rvice - Load/Save Random Seed.
systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices.
[ OK ] Finished systemd-udev-trig…e - Coldplug All udev Devices.
systemd[1]: Finished systemd-sysusers.service - Create System Users.
[ OK ] Finished systemd-sysusers.service - Create System Users.
systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
Starting systemd-tmpfiles-…ate Static Device Nodes in /dev...
systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ OK ] Finished systemd-tmpfiles-…reate Static Device Nodes in /dev.
systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[ OK ] Reached target local-fs-pr…reparation for Local File Systems.
systemd[1]: Mounting tmp.mount - /tmp...
Mounting tmp.mount - /tmp...
systemd[1]: systemd-udevd.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
Starting systemd-udevd.ser…ger for Device Events and Files...
systemd[1]: Mounted tmp.mount - /tmp.
[ OK ] Mounted tmp.mount - /tmp.
systemd[1]: Reached target local-fs.target - Local File Systems.
[ OK ] Reached target local-fs.target - Local File Systems.
systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config...
Starting armbian-zram-conf…rvice - Armbian ZRAM config...
systemd[1]: Starting console-setup.service - Set console font and keymap...
Starting console-setup.ser…m - Set console font and keymap...
systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats...
Starting systemd-binfmt.se…et Up Additional Binary Formats...
systemd[1]: systemd-machine-id-commit.service - Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
systemd[1]: Finished console-setup.service - Set console font and keymap.
[ OK ] Finished console-setup.ser…[0m - Set console font and keymap.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 128 (systemd-binfmt)
systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System...
Mounting proc-sys-fs-binfm…utable File Formats File System...
systemd[1]: proc-sys-fs-binfmt_misc.mount: Mount process exited, code=exited, status=32/n/a
systemd[1]: proc-sys-fs-binfmt_misc.mount: Failed with result 'exit-code'.
systemd[1]: Failed to mount proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System.
[FAILED] Failed to mount proc-sys-f…ecutable File Formats File System.
See 'systemctl status proc-sys-fs-binfmt_misc.mount' for details.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 128 (systemd-binfmt)
systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System...
Mounting proc-sys-fs-binfm…utable File Formats File System...
systemd[1]: proc-sys-fs-binfmt_misc.mount: Mount process exited, code=exited, status=32/n/a
systemd[1]: proc-sys-fs-binfmt_misc.mount: Failed with result 'exit-code'.
systemd[1]: Failed to mount proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System.
[FAILED] Failed to mount proc-sys-f…ecutable File Formats File System.
See 'systemctl status proc-sys-fs-binfmt_misc.mount' for details.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 128 (systemd-binfmt)
systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System...
Mounting proc-sys-fs-binfm…utable File Formats File System...
systemd[1]: proc-sys-fs-binfmt_misc.mount: Mount process exited, code=exited, status=32/n/a
systemd[1]: proc-sys-fs-binfmt_misc.mount: Failed with result 'exit-code'.
systemd[1]: Failed to mount proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System.
[FAILED] Failed to mount proc-sys-f…ecutable File Formats File System.
See 'systemctl status proc-sys-fs-binfmt_misc.mount' for details.
systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'.
systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats.
[FAILED] Failed to start systemd-bi… Set Up Additional Binary Formats.
See 'systemctl status systemd-binfmt.service' for details.
systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files.
[ OK ] Started systemd-udevd.serv…nager for Device Events and Files.
systemd[1]: Starting systemd-networkd.service - Network Configuration...
Starting systemd-networkd.…ice - Network Configuration...
systemd[1]: armbian-zram-config.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: armbian-zram-config.service: Failed with result 'exit-code'.
systemd[1]: Failed to start armbian-zram-config.service - Armbian ZRAM config.
[FAILED] Failed to start armbian-zr…service - Armbian ZRAM config.
See 'systemctl status armbian-zram-config.service' for details.
systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging...
Starting armbian-ramlog.se…rmbian memory supported logging...
fec 20b4000.ethernet end1: renamed from eth0 (while UP)
[* ] (1 of 4) Job dev-ttyS0.device/start running (10s / 1min 30s)
[ OK ] Found device dev-ttymxc0.device - /dev/ttymxc0.
systemd[1]: Started systemd-networkd.service - Network Configuration.
[ OK ] Started systemd-networkd.service - Network Configuration.
systemd[1]: Created slice system-systemd\x2dbacklight.slice - Slice /system/systemd-backlight.
[ OK ] Created slice system-syste…- Slice /system/systemd-backlight.
systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget.
[ OK ] Reached target usb-gadget.…m - Hardware activated USB gadget.
systemd[1]: Starting systemd-backlight@backlight:backlight-display.service - Load/Save Screen Backlight Brightness of backlight:backlight-display...
Starting systemd-backlight… of backlight:backlight-display...
systemd[1]: Finished systemd-backlight@backlight:backlight-display.service - Load/Save Screen Backlight Brightness of backlight:backlight-display.
[ OK ] Finished systemd-backlight…ss of backlight:backlight-display.
[ *** ] (2 of 2) Job armbian-ramlog.service/start running (19s / 38s)
[ OK ] Finished armbian-ramlog.se… Armbian memory supported logging.
systemd[1]: Starting systemd-journald.service - Journal Service...
Starting systemd-journald.service - Journal Service...
systemd[1]: Started systemd-journald.service - Journal Service.
[ OK ] Started systemd-journald.service - Journal Service.
Starting systemd-journal-f…h Journal to Persistent Storage...
systemd-journald[255]: Received client request to flush runtime journal.
systemd-journald[255]: File /var/log/journal/f4c22704e0224eb28754faaef48e4d16/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ OK ] Finished systemd-journal-f…ush Journal to Persistent Storage.
Starting systemd-tmpfiles-… Volatile Files and Directories...
[ OK ] Finished systemd-tmpfiles-…te Volatile Files and Directories.
Starting systemd-resolved.…e - Network Name Resolution...
Starting systemd-timesyncd… - Network Time Synchronization...
Starting systemd-update-ut…rd System Boot/Shutdown in UTMP...
[ OK ] Finished systemd-update-ut…cord System Boot/Shutdown in UTMP.
[ OK ] Started systemd-timesyncd.…0m - Network Time Synchronization.
[ OK ] Reached target time-set.target - System Time Set.
[ OK ] Started systemd-resolved.s…ice - Network Name Resolution.
[ OK ] Reached target nss-lookup.…m - Host and Network Name Lookups.
[ OK ] Reached target sysinit.target - System Initialization.
[ OK ] Started apt-daily.timer - Daily apt download activities.
[ OK ] Started apt-daily-upgrade.… apt upgrade and clean activities.
[ OK ] Started dpkg-db-backup.tim… Daily dpkg database backup timer.
[ OK ] Started e2scrub_all.timer▒▒etadata Check for All Filesystems.
[ OK ] Started fstrim.timer - Discard unused blocks once a week.
[ OK ] Started logrotate.timer - Daily rotation of log files.
[ OK ] Started man-db.timer - Daily man-db regeneration.
[ OK ] Started systemd-tmpfiles-c… Cleanup of Temporary Directories.
[ OK ] Reached target timers.target - Timer Units.
[ OK ] Listening on dbus.socket▒▒- D-Bus System Message Bus Socket.
[ OK ] Reached target sockets.target - Socket Units.
Starting armbian-hardware-…m - Armbian hardware monitoring...
Starting armbian-hardware-…- Armbian hardware optimization...
Starting armbian-led-state…ervice - Armbian leds state...
[ OK ] Finished armbian-hardware-…[0m - Armbian hardware monitoring.
[ OK ] Finished armbian-led-state.service - Armbian leds state.
[ OK ] Finished armbian-hardware-…m - Armbian hardware optimization.
[ OK ] Reached target basic.target - Basic System.
[ OK ] Started cron.service -…kground program processing daemon.
Starting dbus.service - D-Bus System Message Bus...
Starting e2scrub_reap.serv…e ext4 Metadata Check Snapshots...
Starting rsyslog.service - System Logging Service...
Starting systemd-logind.se…ice - User Login Management...
[ OK ] Started rsyslog.service - System Logging Service.
[ OK ] Started dbus.service - D-Bus System Message Bus.
Starting wpa_supplicant.service - WPA supplicant...
[ OK ] Started systemd-logind.service - User Login Management.
[ OK ] Started wpa_supplicant.service - WPA supplicant.
[ OK ] Reached target network.target - Network.
Starting rc-local.service▒▒m - /etc/rc.local Compatibility...
Starting ssh.service - OpenBSD Secure Shell server...
Starting systemd-user-sess…vice - Permit User Sessions...
[ OK ] Started rc-local.service - /etc/rc.local Compatibility.
[ OK ] Finished systemd-user-sess…ervice - Permit User Sessions.
[ OK ] Started getty@tty1.service - Getty on tty1.
[ OK ] Started serial-getty@ttymx…ice - Serial Getty on ttymxc0.
[ OK ] Started ssh.service - OpenBSD Secure Shell server.
[ OK ] Finished e2scrub_reap.serv…ine ext4 Metadata Check Snapshots.
Armbian 24.5.3 Bookworm ttymxc0
orangepione login: orangepi
Password:
Login incorrect
orangepione login: dev
Password:
___ ____ _ ___
/ _ \| _ \(_) / _ \ _ __ ___
| | | | |_) | | | | | | '_ \ / _ \
| |_| | __/| | | |_| | | | | __/
\___/|_| |_| \___/|_| |_|\___|
Welcome to Armbian 24.5.3 Bookworm with Linux 6.6.23
System load: 97% Up time: 2 min
Memory usage: 19% of 486M IP: 10.20.18.144
CPU temp: 50°C Usage of /: 98% of 98G
[ Menu-driven system configuration (beta): sudo apt update && sudo apt install armbian-config ]
systemd[935]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
systemd-journald[255]: Failed to set ACL on /var/log/journal/f4c22704e0224eb28754faaef48e4d16/user-1000.journal, ignoring: Operation not supported
-bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
dev@orangepione:~$
dev@orangepione:~$
dev@orangepione:~$ ifconfig
-bash: ifconfig: command not found
dev@orangepione:~$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: end1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 82:67:83:9e:5d:e4 brd ff:ff:ff:ff:ff:ff
inet 10.20.18.144/24 brd 10.20.18.255 scope global end1
valid_lft forever preferred_lft forever
inet6 fe80::8067:83ff:fe9e:5de4/64 scope link
valid_lft forever preferred_lft forever
3: sit0@NONE: <NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
inet6 ::10.20.18.144/96 scope global
valid_lft forever preferred_lft forever
inet6 ::127.0.0.1/96 scope host
valid_lft forever preferred_lft forever
dev@orangepione:~$ sudo apt-get update -y
sudo: /etc/sudo.conf is owned by uid 1000, should be 0
sudo: /usr/bin/sudo must be owned by uid 0 and have the setuid bit set
dev@orangepione:~$
版权声明：本文标题：imx6ull 通过nfs方式加载armbian定义的文件系统orangepione 内容由网友自发贡献，该文观点仅代表作者本人， 转载请联系作者并注明出处：http://www.freenas.com.cn/jishu/1725890348h888068.html， 本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容，一经查实，本站将立刻删除。
发表评论