WHO - GUIDELINES ON EVALUATION OF SIMILAR BIOTHERAPEUTIC PRODUCTS

ENGLISH ONLY

FINAL

EXPERT COMMITTEE ON BIOLOGICAL STANDARDIZATION

Geneva, 19 to 23 October 2009

GUIDELINES ON EVALUATION OF SIMILAR

BIOTHERAPEUTIC PRODUCTS (SBPs)

© World Health Organization 2009

All rights reserved. Publications of the World Health Organization can be obtained from WHO Press, World Health

Organization, 20 Avenue Appia, 1211 Geneva 27, Switzerland (tel.: +41 22 791 3264; fax: +41 22 791 4857; e-mail:

bookorders@). Requests for permission to reproduce or translate WHO publications – whether for sale or for noncommercial

distribution – should be addressed to WHO Press, at the above address (fax: +41 22 791 4806; e-mail: permissions@).

The designations employed and the presentation of the material in this publication do not imply the expression of any opinion

whatsoever on the part of the World Health Organization concerning the legal status of any country, territory, city or area or of its

authorities, or concerning the delimitation of its frontiers or boundaries. Dotted lines on maps represent approximate border lines for

which there may not yet be full agreement.

The mention of specific companies or of certain manufacturers’ products does not imply that they are endorsed or recommended by the

World Health Organization in preference to others of a similar nature that are not mentioned. Errors and omissions excepted, the names

of proprietary products are distinguished by initial capital letters.

All reasonable precautions have been taken by the World Health Organization to verify the information contained in this

publication. However, the published material is being distributed without warranty of any kind, either expressed or implied. The

responsibility for the interpretation and use of the material lies with the reader. In no event shall the World Health Organization be liable

for damages arising from its use. The named authors [editors] alone are responsible for the views expressed in this publication.

Adopted by the 60th meeting of the WHO Expert Committee on Biological Standardization, 19-23 October 2009. A

definitive version of this document, which will differ from this version in editorial but not scientific details, will be

published in the WHO Technical Report Series.

Page 2

Table of contents

1. 3

2. 4

3. 4

4. 5

5. Scientific considerations and concept for 7

6. Key principles for the licensing 8

7. Reference 9

8. 10

9. .16

10. 19

11. 28

12. Prescribing information 29

13. Roles and responsibilities .29

Authors 31

33

Page

3

1 Introduction

Biotherapeutic products (biotherapeutics) have a successful record in treating many life-threatening and chronic diseases. However, their cost has often been high, thereby limiting their

access to patients, particularly in developing countries. Recently, the expiration of patents and/or

data protection for the first major group of originator’s biotherapeutics has ushered in an era of

products that are designed to be ‘similar’ to a licensed originator product. These products rely, in

part, for their licensing on prior information regarding safety and efficacy obtained with the

originator products. The clinical experience and established safety profile of the originator

products should contribute to the development of similar biotherapeutic products (SBPs). A

variety of terms, such as 'biosimilar products', 'follow-on protein products' and 'subsequent-entry

biologics' have been coined by different jurisdictions to describe these products.

The term 'generic' medicine is used to describe chemical, small molecule medicinal products that

are structurally and therapeutically equivalent to an originator product whose patent and/or data

protection period has expired. The demonstration of bioequivalence of the generic medicine with

a reference product is usually appropriate and sufficient to infer therapeutic equivalence between

the generic medicine and the reference product. However, the approach established for generic

medicines is not suitable for development, evaluation and licensing of SBPs since

biotherapeutics consist of relatively large, and complex proteins that are difficult to characterize.

The clinical performance of biotherapeutics can also be much influenced by the manufacturing

process and some clinical studies will also be required to support the safety and efficacy of a

SBP.

As part of its mandate for assuring global quality, safety and efficacy of biotherapeutics, the

World Health Organization (WHO) provides globally accepted norms and standards for the

evaluation of these products 1, 2. Written standards established through the Expert Committee on

Biological Standardization (ECBS) serve as a basis for setting national requirements for

production, quality control and overall regulation of biological medicines. In addition,

International Standards for measurement are essential tools for the establishment of potency for

biological medicines worldwide 3. Often they are used as primary standards for calibration of the

secondary standards that are directly used in the biological assays.

An increasingly wide range of ‘SBPs1’ are under development or are already licensed in many

countries and a need for guidelines for their evaluation and overall regulation was formally

recognized by the WHO in 2007 4. This document is intended to provide guidance for the

development and evaluation of such biotherapeutics. However, the guidelines will serve as a

living document that will be developed further in the line with the progress in scientific

knowledge and experience.

It is essential that the standard of evidence supporting the decisions to license SBPs be sufficient

to ensure that the product meets acceptable levels of quality, safety and efficacy to ensure public

health. Also, it is expected that the elaboration of the data requirements and considerations for

1

Not all products deemed to be ‘SBPs’ will be consistent with the definition and/or process for evaluation of SBPs

as described in this guideline

Page 4

the licensing of these products will facilitate development of and worldwide access to

biotherapeutics of assured quality, safety and efficacy at more affordable prices. In most cases,

their authorization will be evaluated on a case-by-case basis, and the amount of data required by

a National Regulatory Authority (NRA) may vary. However, it is expected that a guideline on

the scientific principles for evaluation of SBPs will help harmonize the requirements worldwide

and will lead to greater ease and speed of approval and assurance of the quality, safety and

efficacy of these products. It is important to note that biotherapeutics which are not shown to be

similar to a RBP as indicated in this guideline should not be described as 'similar', nor called a

'SBP'. Such products could be licensed through the usually processes using a more extensive

non-clinical and clinical data set or full licensing application.

It was recognized that a number of important issues associated with the use of SBPs need to be

defined by the national authorities. They include but are not limited to the following:

•

•

•

intellectual property issues;

interchangeability and substitution of SBP with RBP; and

labelling and prescribing information.

Therefore, the above mentioned issues are not elaborated in this document.

2 Aim

The intention of this document is to provide globally acceptable principles for licensing

biotherapeutic products that are claimed to be similar to biotherapeutic products of assured

quality, safety, and efficacy that have been licensed based on a full licensing dossier. On the

basis of proven similarity, the licensing of a SBP will rely, in part, on non-clinical and clinical

data generated with an already licensed reference biotherapeutic product (RBP). This guideline

can be adopted as a whole, or partially, by NRAs worldwide or used as a basis for establishing

national regulatory frameworks for licensure of these products.

3 Scope

This guideline applies to well-established and well-characterized biotherapeutic products such as

recombinant DNA-derived therapeutic proteins.

Vaccines, plasma derived products, and their recombinant analogues are excluded from the scope

of this document. WHO recommendations and regulatory guidance for these products are

available elsewhere (/biologicals/areas/en/).

Page

5

4 Glossary

The definitions given below apply to the terms used in this guideline. They may have different

meanings in other contexts.

Comparability exercise

Head-to-head comparison of a biotherapeutic product with a licensed originator product with the

goal to establish similarity in quality, safety, and efficacy. Products should be compared in the

same study using the same procedures.

Drug product

A pharmaceutical product type that contains a drug substance, generally in association with

excipients.

Drug substance

The active pharmaceutical ingredient and associated molecules that may be subsequently

formulated, with excipients, to produce the drug product. It may be composed of the desired

product, product-related substances, and product- and process-related impurities. It may also

contain other components such as buffers.

Equivalent

Equal or virtually identical in the parameter of interest. Equivalent efficacy of two medicinal

products means they have similar (no better and no worse) efficacy and any observed differences

are of no clinical relevance.

Generic medicine

A generic medicine contains the same active pharmaceutical ingredient as and is bioequivalent to

an originator (comparator) medicine. Since generic medicines are identical in the active

pharmaceutical substance, dose, strength, route of administration, safety, efficacy, and intended

use, they can be substituted for the originator product.

Head-to-head comparison

Direct comparison of the properties of the SBP with the RBP in the same study.

Immunogenicity

The ability of a substance to trigger an immune response or reaction (e.g. development of

specific antibodies, T cell response, allergic or anaphylactic reaction).

Page 6

Impurity

Any component present in the drug substance or drug product that is not the desired product, a

product-related substance, or excipient including buffer components. It may be either process- or

product-related.

Non-inferior

Not clinically inferior to a comparator in the parameter studied. A non-inferiority clinical trial is

one which has the primary objective of showing that the response to the investigational product

is not clinically inferior to a comparator by a pre-specified margin.

Originator product

A medicine which has been licensed by the national regulatory authorities on the basis of a full

registration dossier; i.e. the approved indication(s) for use were granted on the basis of full

quality, efficacy and safety data.

Pharmacovigilance

The science and activities relating to the detection, assessment, understanding and prevention of

adverse effects or any other drug related problems.

Reference biotherapeutic product (RBP)

A reference biotherapeutic product is used as the comparator for head-to-head comparability

studies with the similar biotherapeutic product in order to show similarity in terms of quality,

safety and efficacy. Only an originator product that was licensed on the basis of a full

registration dossier can serve as a RBP. It does not refer to measurement standards such as

international, pharmacopoeial, or national standards or reference standards.

Similarity

Absence of a relevant difference in the parameter of interest.

Similar biotherapeutic product (SBP)

A biotherapeutic product which is similar in terms of quality, safety and efficacy to an already

licensed reference biotherapeutic product.

Well-established biotherapeutic product

Well-established biotherapeutic product is the one that has been marketed for a suitable period of

time with a proven quality, efficacy and safety.

Page

7

5 Scientific considerations and concept for licensing SBPs

For the licensing of generic medicines, the regulatory framework is well-established in most

countries. Demonstration of structural sameness and bioequivalence of the generic medicine with

the reference product is usually appropriate to infer (conclude) therapeutic equivalence between

the generic and the reference product. However, the generic approach is not suitable for the

licensing of SBPs since biotherapeutic products usually consist of relatively large and complex

entities that are difficult to characterize. In addition, SBPs are manufactured and controlled

according to their own development since the manufacturer of a SBP normally does not have

access to all the necessary manufacturing information on the originator product. However, even

minor differences in the manufacturing process may affect the pharmacokinetics,

pharmacodynamics, efficacy and/or safety of biotherapeutic products. As a result, it has been

agreed that the normal method for licensing generic medicines through bioequivalence studies

alone is not scientifically appropriate for SBPs.

Decision making regarding the licensing of SBPs should be based on scientific evidence. The

onus is on a manufacturer of a SBP to provide the necessary evidence to support all aspects of an

application for licensing. As with any drug development program, the development of a SBP

involves a stepwise approach starting with characterization and evaluation of quality attributes of

the product and followed by non-clinical and clinical studies. Comprehensive characterization

and comparison at the quality level are the basis for possible data reduction in the non-clinical

and clinical development. If differences between the SBP and the RBP are found at any step, the

underlying reasons for the differences should be investigated. Differences should always be

explained and justified and may lead to the requirement of additional data (e.g. safety data).

In addition to the quality data, SBPs require non-clinical and clinical data generated with the

product itself. The amount of non-clinical and clinical data considered necessary will depend on

the product or class of products, the extent of characterization possible undertaken using state-of-the-art analytical methods, on observed or potential differences between the SBP and the RBP,

and on the clinical experience with the product class (e.g. safety/immunogenicity concerns in a

specific indication). A case by case approach is clearly needed for each class of products.

A SBP is intended to be similar to a licensed biotherapeutic product for which there is a

substantial evidence of safety and efficacy. The ability for the SBP to be authorized based on

reduced non-clinical and clinical data depends on proof of its similarity to an appropriate RBP

through the comparability exercise. Manufacturers should demonstrate a full understanding of

their product, consistent and robust manufacture of their product, and submit a full quality

dossier that includes a complete characterization of the product. The comparability exercise

between the SBP and the RBP in the quality part represents an additional element to the

‘traditional’ full quality dossier. The reduction in data requirements is therefore only possible for

the non-clinical and/or clinical parts of the development program. The dosage form and route of

administration of the SBP should be the same as for the RBP.

Studies must be comparative in nature employing analytical strategies (methods) that are

sensitive to detect potential differences between the SBP and the RBP. The main clinical studies

should use the final formulation derived from the final process material of the SBP. Otherwise,

Page 8

additional evidence of comparability will be required to demonstrate that the SBP to be marketed

is comparable to that used in the main clinical studies.

If similarity between the SBP and the RBP has been convincingly demonstrated, the SBP may be

approved for use in other clinical indications of the RBP that have not directly been tested in

clinical trials if appropriate scientific justification for such extrapolation is provided by the

manufacturer (see section 10.7). Significant differences between the SBP and the chosen RBP

detected during the comparability exercise would be an indication that the products are not

similar and more extensive non-clinical and clinical data may be required to support the

application for licensing.

Comparability exercise

The comparability exercise for a SBP is designed to show that the SBP has highly similar quality

attributes when compared to the RBP. However, it also includes the non-clinical and clinical

studies to provide an integrated set of comparative data. The comparability data at the level of

quality can be considered to be an additional set of data over that which is normally required for

an originator product developed as a new and independent product. This is the basis for reducing

the non-clinical and clinical data requirements.

Although the quality comparisons are undertaken at various points throughout the quality

application/dossier, a distinction should be made between usual quality data requirements and

those presented as part of the comparability exercises. It may be useful to present these as a

separate section in the quality module.

6 Key principles for the licensing of SBPs

a. The development of a SBP involves stepwise comparability exercise(s) starting with

comparison of the quality characteristics of the SBP and RBP. Demonstration of

similarity of a SBP to a RBP in terms of quality is a prerequisite for the reduction of the

non-clinical and clinical data set required for licensure. After each step of the

comparability exercise, the decision to proceed further with the development of the SBP

should be evaluated.

b. The basis for licensing a product as a SBP depends on its demonstrated similarity to a

suitable RBP in quality, non-clinical, and clinical parameters. The decision to license a

product as a SBP should be based on evaluation of the whole data package for each of

these parameters.

c. If relevant differences are found in the quality, non-clinical, or clinical studies, the

product will not likely qualify as a SBP and a more extensive non-clinical and clinical

data set will likely be required to support its application for licensure. Such a products

should not qualify as a SBP as defined in this guideline.

Page

9

d. If comparability exercises and/or studies with the RBP are not performed throughout the

development process as outlined in this guidance document, the final product should not

be referred to as a SBP.

e. SBPs are not “generic medicines” and many characteristics associated with the

authorization process generally do not apply.

f. SBPs, like other biotherapeutic products, require effective regulatory oversight for the

management of their potential risks and in order to maximize their benefits.

7 Reference biotherapeutic product

Comprehensive information on the RBP provides the basis for establishing the safety, quality,

and effectiveness profile to which the SBP is compared. The RBP also provides the basis for

dose selection and route of administration, and is utilized in the comparability studies required to

support the licensing application. The demonstration of an acceptable level of similarity between

the SBP and RBP provides the rationale for utilizing a reduced non-clinical and clinical data set

to support the application for market authorization of the SBP. Hence the RBP is central to the

licensing of a SBP.

To support licensure of the SBP, similarity of the SBP to the RBP should be demonstrated

through head-to-head comparisons with the RBP. The same RBP should be used throughout the

entire comparability exercise.

The choice of a RBP is of critical importance for the evaluation of SBP. The rationale for the

choice of the RBP should be provided by the manufacturer of the SBP in the submission to the

NRA. Traditionally, NRAs have required the use of a nationally licensed reference product for

licensing of generic medicines. This practice may not be feasible for countries lacking

nationally-licensed RBPs. NRAs may need to consider establishing additional criteria to guide

the acceptability of using a RBP licensed or resourced in other countries. The use of reference

products with proven efficacy and safety in a given population will be one of the factors to

consider. Another parameter may be market experience in addition to the duration and marketed

use.

Considerations for choice of reference biotherapeutic product

Since the choice of a RBP is essential to the development of a SBP, the following should be

considered.

• The RBP should have been marketed for a suitable duration and have a volume of

marketed use such that the demonstration of similarity to it brings into relevance a

substantial body of acceptable data regarding the safety and efficacy.

• The manufacturer needs to demonstrate that the chosen RBP is suitable to support the

application for marketing authorization of a SBP.

• The RBP should be licensed based on a full quality, safety, and efficacy data. Therefore a

SBP should not be considered as a choice for RBP.

Page 10

• The same RBP should be used throughout the development of the SBP (i.e. for the

comparative quality, non-clinical, and clinical studies).

• The drug substance of the RBP and the SBP must be shown to be similar.

• The dosage form and route of administration of the SBP should be the same as that of the

RBP.

• The following factors should be considered in the choice of a RBP that is marketed in

another jurisdiction.

o The RBP should be licensed and widely marketed in another jurisdiction which

has well-established regulatory framework and principles, as well as considerable

experience of evaluation of biotherapeutic products, and post-marketing

surveillance activities.

o The acceptance of a RBP for evaluation of a SBP in a country does not imply

approval for use of the RBP by the NRA of that country.

8 Quality

The quality comparison showing molecular similarity between the SBP and the RBP is

indispensable to provide rationale for predicting that the clinical safety and efficacy profile of the

RBP should also apply to the SBP so that the extent of the non-clinical and clinical data required

with the SBP can be reduced. Ideally, development of a SBP involves thorough characterization

of a number of representative lots of the RBP and then engineering a manufacturing process that

will reproduce a product that is highly similar to the RBP in all clinically relevant product quality

attributes; i.e. those product attributes that may impact clinical performance. A SBP is generally

derived from a separate and independent master cell bank using independent manufacturing

processes and control. These should be selected and designed to meet the required comparability

criteria. A full quality dossier for both drug substance and drug product is always required,

which complies with the standards as required by NRAs for originator products.

Increased knowledge of the relationship between biochemical, physicochemical, and biological

properties of the product and clinical outcomes will facilitate development of a SBP. Due to the

heterogeneous nature of proteins (especially those with extensive post-translational

modifications such as glycoproteins), the limitations of some analytical techniques, and the

generally unpredictable nature of the clinical consequences of minor differences in protein

structural/ physico-chemical properties, the evaluation of comparability will have to be carried

out independently for each product. For example, oxidation of certain methionine residues in one

protein may have no impact on clinical activity whereas in another protein it may significantly

decrease the intrinsic biological activity of the protein, or may increase its immunogenicity.

Thus, differences in the levels of Met oxidation in the RBP and SBP would need to be evaluated

and, if present, their clinical relevance would be evaluated and discussed.

Page

11

To evaluate comparability, the manufacturer should carry out a comprehensive physicochemical

and biological characterization of the SBP in head-to-head comparisons with the RBP. All

aspects of product quality and heterogeneity should be assessed (see characterization below).

A high degree of similarity between the SBP and the RBP is the basis for reducing non-clinical

and clinical requirements for licensing. However, some differences are likely to be found, e.g.

due to differences in impurities or excipients. Such differences should be assessed for their

potential impact on clinical safety and efficacy of the SBP and a justification, e.g. own study

results or literature data, for allowing such differences provided. Differences of unknown clinical

relevance, particularly regarding safety, may have to be addressed in additional studies pre- or

post-marketing. Differences in quality attributes known to have potential impact on clinical

activity will influence the judgment of consideration whether to name such product as 'SBP'. For

example, if differences are found in glycosylation patterns that alter the biodistribution of the

product and thereby change the dosing scheme, then this product can not be considered a SBP.

Other differences between the SBP and RBP may be acceptable, and would not trigger the need

for extra non-clinical and/or clinical evaluation. For example, a therapeutic protein that has lower

levels of protein aggregates would, in most cases, be predicted to have a better safety profile than

the RBP and would not need added clinical evaluation. Along the same lines, if heterogeneity in

the terminal amino acids of the RBP is known, and sufficiently documented, without affecting

the bioactivity, distribution, or immunogenicity of the RBP or similar products in its class, then

there may be no need for added clinical safety or efficacy studies based upon this heterogeneity

of the RPB and SBP.

Due to the unavailability of drug substance for the RBP, the SBP manufacturer will usually be

using commercial drug product for the comparability exercise. The commercial drug product will,

by definition, be in the final dosage form containing the drug substance(s) formulated with

excipients. It should be verified that these do not interfere with analytical methods and thereby

impact the test results. If the drug substance in the RBP needs to be purified from a formulated

reference drug product in order to be suitable for characterization, studies must be carried out to

demonstrate that product heterogeneity and relevant attributes of the active moiety are not

affected by the isolation process. The approach employed to isolate and compare the SBP to the

RBP should be justified and demonstrated, with data, to be appropriate for the intended purpose.

Where possible, the product should be tested with and without manipulation.

8.1 Manufacturing process

Manufacture of a SBP should be based on a comprehensively designed production process taking

all relevant guidelines into account. The manufacturer needs to demonstrate the consistency and

robustness of the manufacturing process by implementing Good Manufacturing Practices 5,

modern quality control and assurance procedures, in-process controls, and process validation.

The manufacturing process should meet the same standards as required by the NRA for

originator products. The manufacturing process should be optimized to minimize differences

between the SBP and RBP in order to (a) maximize the ability to reduce the clinical testing

requirements for the SBP based upon the clinical history of the RBP, and (b) minimize any

predictable impact on the clinical safety and efficacy of the product. Some differences between

the SBP and RBP are expected and may be acceptable, provided, appropriate justification with

regard to lack of impact on clinical performance is given.

Page 12

It is understood that a manufacturer developing a SBP does not have access to confidential

details of the manufacturing process of the RBP such that the process will differ from the

licensed process for the RBP (unless there is a contractual arrangement with the manufacturer of

the RBP). The manufacturing process for a SBP should employ state-of-the-art science and

technology to achieve a high quality SBP that is as similar as possible to the RBP. This will

involve evaluating the RBP extensively prior to developing the manufacturing process for the

SBP. The SBP manufacturer should assemble all available knowledge of the RBP concerning the

type of host cell, formulation and container closure system used for marketing the RBP. If

applicable, the SBP manufacturer should then determine the potential impact of changing any

one of these elements on product quality, safety and efficacy based on available evidence from

public information, experience with previous use of the RBP. SBP manufacturer is encouraged to

apply this knowledge to the design of the manufacturing process. The rationale for accepting

these differences needs to be justified based upon sound science and clinical experience, either

with the SBP, or the RBP.

As a general rule, the product should be expressed and produced in the same host cell type as the

RBP (e.g. , CHO cells, etc.) in order to minimize the potential for important changes to

critical quality attributes of the protein and to avoid introduction of certain types of process-related impurities (e.g. host cell proteins, endotoxins, yeast mannans) that could impact clinical

outcomes and immunogenicity. The host cell type for manufacture of the SBP should only be

changed if the manufacturer can demonstrate convincingly that the structure of the molecule is

not affected or that the clinical profile of the product will not change. For example, somatropin

produced in yeast cells appears to have similar characteristics to somatropin expressed in E. coli.

In most cases, however, the use of a different host cell type will not be feasible for glycoproteins

because glycosylation patterns vary significantly between different host cell types.

A complete description and data package should be provided that delineates the manufacturing

process, starting with development of expression vectors and cell banks, cell culture/

fermentation, harvest, purification and modification reactions, filling into bulk or final containers,

and storage. The development studies conducted to establish and validate the dosage form,

formulation, and container closure system (including integrity to prevent microbial

contamination) and usage instructions should be also documented (see relevant guidelines such

as ICH).

8.2 Characterization

Thorough characterization of both RBP and SBP should be carried out using appropriate, state-of-the-art biochemical, biophysical, and biological analytical techniques. For the active

ingredient(s) (i.e. the desired product), details should be provided on primary and higher-order

structure, post-translational modifications (including but not limited to glycoforms), biological

activity, purity, impurities, product-related (active) substances (variants), and immunochemical

properties, where relevant.

When conducting a comparability exercise, head-to-head characterization studies are required to

compare the SBP and the RBP. The primary structure of SBP and the RBP should be identical.

If differences between the SBP and the RBP are found, their potential impact on safety and

efficacy of the SBP should be evaluated. The predefined limits need to be considered in advance.

The assessment of the results should include the investigation of the differences found between

Page

13

SBP and RBP. This determination will be based upon knowledge of the relationship between

product quality attributes and clinical activity of the RBP and related products, the clinical

history of the RBP, and lot-to-lot differences for commercial lots of the RBP. For example,

quality attributes such as composition and profile of glycosylation, biological activity which is

known to be related to clinical activity, and receptor binding activity should be justified.

Knowledge of the analytical limitations of each technique used to characterize the product (e.g.

limits of sensitivity, resolving power) should be applied when making a determination of

similarity. Representative raw data should be provided for all complex analytical methods (e.g.

high quality reproductions of gels, chromatograms, etc.) in addition to tabular data summarizing

the complete data set and showing the results of all release and characterization analyses carried

out on the SBP and the RBP.

The following criteria should be considered when conducting the comparability exercise:

8.2.1 Physicochemical Properties

The physicochemical characterization should include the determination of primary and higher

order structure (secondary/tertiary/quaternary) using appropriate analytical methods (e.g. mass

spectrometry, NMR) and other biophysical properties. An inherent degree of structural

heterogeneity occurs in proteins due to the biosynthesis process such that the RBP and the SBP

are likely to contain a mixture of post-translationally modified forms. Appropriate efforts should

be made to investigate, identify and quantify these forms.

8.2.2 Biological Activity

Biological activity is the specific ability or capacity of the product to achieve a defined

biological effect. It serves multiple purposes in the assessment of product quality and is required

for characterization, and batch analysis. Ideally, the biological assay will reflect the understood

mechanism of action of the protein and will thus serve as a link to clinical activity. A biological

assay is a quality measure of the ‘function’ of the protein product and can be used to determine

whether a product variant has the appropriate level of activity (i.e. a product-related substance)

or is inactive (and is therefore defined as an impurity). The biological assay also complements

the physicochemical analyses by confirming the correct higher order structure of the molecule.

Thus, the use of a relevant biological assay(s) with appropriate precision and accuracy provides

an important means of confirming that a significant functional difference does not exist between

the SBP and the RBP.

For a product with multiple biological activities, manufacturers should perform, as part of

product characterization, a set of relevant functional assays designed to evaluate the range of

activities of the product. For example, certain proteins possess multiple functional domains that

express enzymatic and receptor-binding activities. In such situations, manufacturers should

evaluate and compare all relevant functional activities of the SBP and RBP.

Potency is the quantitative measure of the biological activity. A relevant, validated potency assay

should be part of the specification for drug substance and/or drug product. The results of the

potency assay should be provided and expressed in units of activity. Where possible (e.g. for in

vitro biochemical assays such as enzyme assays or binding assays), the results may be expressed

Page 14

as specific activities (e.g. units/mg protein). Assays should be calibrated against an international

or national standard or reference reagent, when available and appropriate. WHO provides

international standards and reference reagents, which serve as reference sources of defined

biological activity expressed in an international unit or Unit. International standards and

reference reagents are intended for calibration of national reference standards.

(/biologicals/reference_preparations/en/). Therefore, international or national

standards and reference reagents should be used to determine the potency and to express results

in IU or U. They are not intended for use as a RBP during the comparability exercise.

Biological assays can be used for other purposes than determination of potency. For example, a

relevant biological assay is essential for determining whether antibodies that develop in response

to the product have neutralizing activity that impacts the biological activity of the product and/or

endogenous counterparts, if present (see section 10.6).

8.2.3 Immunochemical Properties

When immunochemical properties are part of the characterization (e.g. for antibodies or

antibody-based products), the manufacturer should confirm that the SBP is comparable to the

RBP in terms of specificity, affinity, binding kinetics, and Fc functional activity, where relevant.

8.2.4 Impurities

Due to the limited access to all necessary information on the manufacturing process as well as

the drug substance of the originator product, it is recognized that the evaluation of similarity of

the impurity profiles between SBP and RBP will be generally difficult. Nevertheless, process-

and product-related impurities should be identified, quantified by state-of-the-art technology and

compared between the SBP and RBP. Some differences may be expected because the proteins

are produced by different manufacturing processes. If significant differences are observed in the

impurity profile between the SBP and the RBP, their potential impact on efficacy and safety,

including immunogenicity, should be evaluated. It is critical to have suitable assays for process-related impurities, specific to the cell line used for production.

8.3 Specifications

Specifications are employed to verify the routine quality of the drug substance and drug product

rather than to fully characterize them. As for any biotherapeutic product, specifications for a SBP

should be set as described in established guidelines and monographs, where these exist. It should

be noted that pharmacopoeial monographs may only provide a minimum set of requirements for

a particular product and additional test parameters may be required. Reference to analytical

methods used and acceptance limits for each test parameter of the SBP should be provided and

justified. All analytical methods referenced in the specification should be validated; the

corresponding validation should be documented.

Specifications for a SBP will not be the same as for the RBP since the manufacturing processes

will be different and different analytical procedures and laboratories will be used for the assays.

Nonetheless, the specifications should capture and control important product quality attributes

known for the RBP (e.g. correct identity; purity, potency; molecular heterogeneity in terms of

Page

15

size, charge, and hydrophobicity, if relevant; degree of sialylation; number of individual

polypeptide chains; glycosylation of a functional domain; aggregate levels; impurities such as

host cell protein and DNA). The setting of specifications should be based upon the

manufacturer’s experience with the SBP (e.g. manufacturing history; assay capability; safety and

efficacy profile of the product) and the experimental results obtained by testing and comparing

the SBP and RBP. Sufficient lots of SBP should be employed in setting specifications. The

manufacturer should demonstrate, whenever possible, that the limits set for a given specification

are not significantly wider than the range of variability of the RBP over the shelf-life of the

product, unless justified.

8.4 Analytical techniques

Although the power of analytical methods for characterization of proteins has increased

dramatically over the past few decades, there are still obstacles to completely characterizing

complex biotherapeutic products. A battery of state-of-the-art analyses is needed to determine

structure, function, purity, and heterogeneity of the products. The methods employed should

separate and analyze different variants of the product based upon different underlying chemical,

physical, and biological properties of protein molecules. For example, PAGE, ion exchange

chromatography, isoelectric focusing, and capillary electrophoresis all separate proteins based

upon charge, but they do so under different conditions and based upon different physicochemical

properties. As a result, one method may detect variants that another method does not detect. The

goal of the comparability investigation is to be as comprehensive as possible in order to

minimize the possibility of undetected differences between the RBP and SBP that may impact

clinical activity. The analytical limitations of each technique (e.g. limits of sensitivity, resolving

power) should be considered when making a determination of similarity between a SBP and a

RBP.

The measurement of quality attributes in characterization studies (versus in the specifications)

does not necessarily require the use of validated assays, but the assays should be scientifically

sound and qualified; i.e. they should provide results that are meaningful and reliable. The

methods used to measure quality attributes for lot release should be validated in accordance with

relevant guidelines, as appropriate. A complete description of the analytical techniques employed

for release and characterization of the product should be provided in the license application.

8.5 Stability

The stability studies should be in compliance with relevant guidance as recommended by the

NRA. Studies should be carried out to show which release and characterization methods are

stability-indicating for the product. Generally, stability studies should be summarized in an

appropriate format such as tables, and they should include results from accelerated degradation

studies and studies under various stress conditions (e.g. temperature, light, humidity, mechanical

agitation). Accelerated stability studies comprise an important element of the determination of

similarity between a SBP and a RBP because they can reveal otherwise-hidden properties of a

product that warrant additional evaluation. They are also important for identifying the

degradation pathways of a protein product. The results obtained from accelerated stability studies

may show that additional controls should be employed in the manufacturing process and during

shipping and storage of the product in order to ensure the integrity of the product. Head-to-head

Page 16

accelerated stability studies comparing the SBP to the RBP will be of value in determining the

similarity of the products by showing a comparable degradation profile. However, currently,

stress testing carried out in a comparative manner does not provide an added value.

Representative raw data showing the degradation profiles for the product should be provided in

the license application. The stability data should support the conclusions regarding the

recommended storage and shipping conditions and the shelf life/storage period for the drug

substance, drug product, and process intermediates that may be stored for significant periods of

time. Stability studies on drug substance should be carried out using containers and conditions

that are representative of the actual storage containers and conditions. Stability studies on drug

product should be carried out in the intended drug product container-closure system. Real

time/real temperature stability studies will determine the licensed storage conditions and

expiration dating for the product. This may or may not be the same as for the RBP.

9 Non-clinical evaluation

The non-clinical part of the guideline addresses the pharmaco-toxicological assessment of the

SBP. The establishment of safety and efficacy of a SBP usually requires the generation of some

non-clinical data with the SBP.

9.1 General considerations

The demonstration of a high degree of molecular similarity between the SBP and RBP should

significantly reduce the need for non-clinical studies since the RBP will already have a

significant clinical history. Non-clinical studies, should be conducted with the final formulation

of the SBP intended for clinical use, unless otherwise justified.

The design of an appropriate non-clinical study program requires a clear understanding of the

product characteristics. Results from the physico-chemical and biological characterization

studies should be reviewed from the point-of-view of potential impact on efficacy and safety.

When developing a SBP some existing guidelines may be relevant and should therefore be taken

into account; e.g. the ´Note for preclinical safety evaluation of biotechnology-derived

pharmaceuticals` (ICH S6) 6.

SBPs often require the application of unique approaches to assessing their safety in non-clinical

studies. Problems in the non-clinical evaluation of SBPs containing biotechnology-derived

recombinant proteins as drug substance are often related to the fact that these products:

- may show species-specific pharmacodynamic activity such that it is sometimes difficult to

identify a relevant species for pharmacodynamic and toxicological evaluation; and/or

- will, as ´foreign proteins`, usually elicit an antibody response in long-term animal studies. Thus,

the results of subchronic or chronic repeat dose studies may be difficult to interpret due to the

formation of antibody complexes with the drug substance.

Page

17

9.2 Special considerations

Non-clinical evaluation of a new biotherapeutic normally encompasses a broad spectrum of

pharmacodynamic, pharmacokinetic and toxicological studies 6. The amount of additional non-clinical data required to establish safety and efficacy of a SBP is considered to be highly

dependent on the product and on substance-class related factors. Factors that often elicit the need

for additional non-clinical studies include, but are not restricted to:

- Quality-related factors:

• Significant differences in the cell expression system compared with the RBP

• Significant differences in purification methods used

• The presence of a complex mixture of less well characterized product- and/or process-related impurities

- Factors related to pharmaco-toxicological properties of the drug substance:

• Mechanism(s) of drug action are unknown or poorly understood

• The drug substance is associated with significant toxicity and/or has a narrow therapeutic

index

• Limited clinical experience with the RBP

Depending on these factors, the spectrum of studies required to establish safety and efficacy of

the SBP may vary considerably and should be defined on a case-by-case basis. For example, in

the case of a highly complex drug substance that is difficult to characterize by analytical

techniques and which possesses a narrow therapeutic index, the non-clinical development

program may encompass a significant portion of the spectrum of studies described in relevant

guidelines such as ICH S6 6. On the other hand, for products for which the drug substance and the

impurity profile are well characterized by analytical means, which possess a wide therapeutic

index and for which an extensive clinical experience is available, the non-clinical development

program will likely be more limited. However, a head-to-head repeat dose toxicity study should

usually constitute a minimum requirement for non-clinical evaluation of a SBP. The non-clinical

studies constitute a part of the overall comparability exercise. Therefore, the studies should be

comparative in nature and designed to detect differences in response between the SBP and the

RBP and not just the response to the SBP alone. Any deviation to this approach should be

appropriately justified.

In vitro studies:

Assays like receptor-binding studies or cell-based assays (e.g. cell-proliferation or cytotoxicity

assays) should normally be undertaken in order to establish comparability of the biological/

pharmacodynamic activity of the SBP and RBP. Such data are usually already available from the

Page 18

biological assays described in the quality part of the dossier (see chapter 8.2.2). Reference to

these studies can be made in the non-clinical part of the dossier.

In vivo studies:

Animal studies should be designed to maximize the information obtained. Such studies should be

comparative in nature (see above), should be performed in (a) species known to be relevant (i.e.

a species in which the RBP has been shown to possess pharmacodynamic and/or toxicological

activity) and employ state-of-the-art technology. Where the model allows, consideration should

be given to monitoring a number of endpoints such as:

- Biological/ pharmacodynamic activity relevant to the clinical application. These data should

usually be available from biological assays described in the quality part of the dossier (see

chapter 8.2.2) and reference to these studies can be made in the non-clinical part of the dossier. If

feasible, biological activity may be evaluated as part of the non-clinical repeat dose toxicity

study (described below). In vivo evaluation of biological/ pharmacodynamic activity may be

dispensable if in vitro assays are available, which have been validated to reliably reflect the

clinically relevant pharmacodynamic activity of the RBP.

- Non-clinical toxicity as determined in at least one repeat dose toxicity study in a relevant

species and including toxicokinetic measurements. These measurements should include

determination and characterization of antibody responses, including anti-product antibody titres,

cross reactivity with homologous endogenous proteins, and product neutralizing capacity. The

duration of the studies should be sufficiently long to allow detection of potential differences in

toxicity and antibody responses between the SBP and RBP.

Besides being a part of the overall comparability exercise, the comparative repeat dose toxicity

study is considered to provide reassurance that no ´unexpected` toxicity will occur during

clinical use of the SBP. If performed with the final formulation intended for clinical use, the

repeat dose toxicity study will, in principle, allow for detection of potential toxicity associated

with both the drug substance and product- and process-related impurities.

Although the predictive value of animal models for immunogenicity in humans is considered low,

antibody measurements, if applicable, should be included in the repeat dose toxicity study to aid

in the interpretation of the toxicokinetic data and to help assess, as part of the overall

comparability exercise, whether important differences in structure or immunogenic impurities

exist between the SBP and RBP (the immunological response may be sensitive to differences not

detected by laboratory analytical procedures).

Depending on the route of administration, local tolerance may need to be evaluated. If feasible,

this evaluation may be performed as part of the described repeat dose toxicity study.

On the basis of the demonstration of similarity between the SBP and RBP by the additional

comparability exercise performed as part of the quality evaluation, normally other routine

toxicological studies such as safety pharmacology, reproductive toxicology, genotoxicity and

carcinogenicity studies are not generally requirements for the non-clinical testing of a SBP,

unless triggered by results of the repeat dose toxicity study or the local tolerance study and/or by

Page

19

other known toxicological properties of the RBP (e.g. known adverse effects of the RBP on

reproductive function).

10 Clinical evaluation

The main/pivotal clinical data should be generated using the product derived from the final

manufacturing process and therefore reflecting the product for which marketing authorization is

being sought. Any deviation from this recommendation needs to be justified and additional data

may be required, such as from PK bridging studies comparing the PK profiles of the products

from the previous and final formulations. For changes in the manufacturing process ICH Q5E

should be followed 7.

Clinical studies should be designed to demonstrate comparable safety and efficacy of the SBP to

the RBP and therefore need to employ testing strategies that are sensitive enough to detect

relevant differences between the products, if present (see below).

The clinical comparability exercise is a stepwise procedure that should begin with

pharmacokinetic and pharmacodynamic studies followed by the pivotal clinical trials. If at any

step relevant differences between the SBP and the RBP are detected, the reasons need to be

explored and justified. If this is not possible, the new product may not qualify as a SBP and a full

licensing (stand alone) application should be considered.

10.1 Pharmacokinetic (PK) studies

The PK profile is an essential part of the basic description of a medicinal product and should

always be investigated. PK studies should generally be performed for the routes of

administration applied for and using doses within the therapeutic dose range recommended for

the RBP.

PK studies must be comparative in nature and should be designed to enable detection of potential

differences between the SBP and the chosen RBP. This is usually best achieved by performing

single-dose, cross-over PK studies in a homogenous study population and by using a dose where

the sensitivity to detect differences is largest. For example, for a medicinal product with

saturable absorption (saturation kinetics), the lowest therapeutic dose would be most appropriate,

provided that the employed assay can measure the resulting drug plasma levels with sufficient

accuracy and precision. In order to reduce variability not related to differences between products,

PK studies could be performed in healthy volunteers, if considered ethical and scientifically

justified. If the investigated drug substance is known to have adverse effects and the

pharmacological effects or risks are considered unacceptable for healthy volunteers, it may be

necessary to perform the PK studies in the proposed patient population.

In general, single dose PK studies will suffice. However, in cases of dose or time-dependent

pharmacokinetics, resulting in markedly higher concentrations at steady-state than expected from

single dose data, a potential difference in the extent of absorption of the SBP and RBP may be

larger at steady-state than after single dose administration. In such cases, it may be advisable for

Page 20

the manufacturer to perform an additional comparative multiple dose study to ensure similar PK

profiles also at steady-state before commencing the confirmatory clinical trial(s). In steady-state

PK studies, the administration scheme should preferably use the highest customary dosage

recommended for the RBP.

The choice of single-dose studies, steady-state studies, or repeated determination of PK

parameters and the study population should be justified by the manufacturer. The cross-over

design eliminates inter-subject variability and therefore, compared to the parallel design, reduces

the sample size necessary to show equivalent PK profiles of the SBP and RBP. The treatment

phases should be separated by an adequate wash-out phase to avoid carry-over effects. The

cross-over design may not be appropriate for biological medicinal products with a long half-life

or for proteins for which formation of anti-product antibodies is likely. In parallel designs, care

should be taken to avoid relevant imbalances in all prognostic variables between treatment

groups that may affect the pharmacokinetics of the drug substance (e.g. ethnic origin, smoking

status, extensive/ poor metabolizer status of the study population).

PK comparison of the SBP and the RBP should not only include absorption/ bioavailability but

should also include elimination characteristics; i.e. clearance and/or elimination half-life, since

differences in elimination rate of the SBP and the RBP may exist.

Acceptance criteria for the demonstration of similar PK between the SBP and the RBP should be

pre-defined and appropriately justified. It is noted that the criteria used in standard clinical PK

comparability studies (bioequivalence studies) were developed for chemically-derived, orally

administered products and may not necessarily be applicable for biological medicinal products.

Due to the lack of established acceptance criteria designed for biologicals, the traditional 80-125 % equivalence range is often used. However, if the 90% confidence intervals of the ratio of

the population geometric means (test/ reference) for the main parameters under consideration

(usually rate and extent of absorption) fall outside this traditional range, the SBP may still be

considered similar to the RBP provided there is sufficient evidence for similarity from the quality,

non-clinical, PD, efficacy and safety comparisons.

Other PK studies, such as interaction studies (with drugs likely to be used concomitantly) or

studies in special populations (e.g. children, the elderly and patients with renal or hepatic

insufficiency) are not usually required for a SBP.

Historically, the PK evaluation of peptide or protein products has suffered from limitations in the

assay methodology thus limiting the usefulness of such studies. Special emphasis should

therefore be given to the analytical method selected and its capability to detect and follow the

time course of the protein (the parent molecule and/or degradation products) in a complex

biological matrix that contains many other proteins. The method should be optimized to have

satisfactory specificity, sensitivity and a range of quantification with adequate accuracy and

precision.

In some cases, the presence of measurable concentrations of endogenous protein may

substantially affect the measurement of the concentration-time profile of the administered

exogenous protein. In such cases, the manufacturer should describe and justify the approach to

minimize the influence of the endogenous protein on the results.

Page

21

10.2 Pharmacodynamic (PD) studies

Although comparative clinical trials are usually required for demonstration of similar efficacy

and safety of the SBP and RBP, it may be advisable for the manufacturer to ensure similar PD

profiles before proceeding to clinical trials, particularly if a difference in PK profiles of unknown

clinical relevance has been detected.

In many cases, PD parameters are investigated in the context of combined PK/PD studies. Such

studies may provide useful information on the relationship between dose/exposure and effect,

particularly if performed at different dose levels. In the comparative PD studies, PD effects

should be investigated in a suitable population using a dose/doses within the steep part of the

dose-response curve in order to best detect potential differences between the SBP and the RBP.

PD markers should be selected based on their clinical relevance.

10.3 Confirmatory pharmacokinetic/pharmacodynamic (PK/PD) studies

Usually, clinical trials are required to demonstrate similar efficacy between the SBP and the RBP.

In certain cases, however, comparative PK/PD studies may be appropriate, provided that 1) the

PK and PD properties of the RBP are well characterized, 2) at least one PD marker is a marker

linked to efficacy (e.g. an accepted surrogate marker for efficacy), and 3) the relationship

between dose/exposure, the relevant PD marker(s) and response/efficacy of the RBP is

established. Euglycaemic clamp studies would be an example for acceptable confirmatory

PK/PD studies for the comparison of efficacy of two insulins. In addition, absolute neutrophil

count and CD34+ cell count are the relevant PD markers for the activity of granulocyte colony

stimulating factor (G-CSF) and could be used in PK/PD studies in healthy volunteers to

demonstrate similar efficacy of two G-CSF-containing medicinal products.

The study population and dosage should represent a test system that is known to be sensitive to

detect potential differences between the SBP and the RBP. For example, in the case of insulin,

the study population should consist of non-obese healthy volunteers or patients with type 1

diabetes rather than insulin-resistant obese patients with type 2 diabetes. Otherwise, it will be

necessary to investigate a relevant dose range to demonstrate that the test system is

discriminatory 8. In addition, the acceptance ranges for demonstration of similarity in

confirmatory PK and PD parameters should be pre-defined and appropriately justified. If

appropriately designed and performed such PK/PD studies are often more sensitive to detect

potential differences in efficacy than trials using clinical endpoints.

10.4 Efficacy studies

Dose finding studies are not required for a SBP. Demonstration of comparable potency, PK and

PD profiles provide the basis for the use of the posology of the RBP in the confirmatory clinical

trial(s).

Similar efficacy of the SBP and the chosen RBP will usually have to be demonstrated in

adequately powered, randomized, and controlled clinical trial(s). The principles of such trials are

laid down in relevant ICH guidelines 8, 9. Clinical studies should preferably be double-blind or at a

Page 22

minimum observer-blind. In the absence of any blinding, careful justification will be required to

prove that the trial results are free from significant bias.

Potential differences between the SBP and the RBP should be investigated in a sensitive and

preferably well-established clinical model. For example, in the case of growth hormone (GH),

treatment-naïve children with GH deficiency usually represent the most appropriate study

population as opposed to children with non GH-deficient short stature that are usually less

sensitive to the effects of GH. Although adult patients with GH deficiency could also be

considered a “sensitive” population, the endpoint used to measure effects of GH treatment (i.e.

body composition) is less sensitive than the one used in children (i.e. longitudinal growth)

making an equivalence or non-inferiority margin more difficult to define.

In principle, equivalence designs (requiring lower and upper comparability margins) are clearly

preferred for the comparison of efficacy and safety of the SBP with the RBP. Non-inferiority

designs (requiring only one margin) may be considered if appropriately justified. While both of

the designs can be used, their advantages and disadvantages should be well understood. The

designs should be chosen regarding the possible advantages and disadvantages of each (see

section "Advantages and disadvantages of equivalence/ non-inferiority designs for SBPs"). For

statistical considerations see section “Statistical considerations for the design and analysis of

equivalence/ non-inferiority trials for SBPs” below.

Equivalence/ non-inferiority margins have to be pre-specified and justified based on clinical

relevance; i.e. the selected margin should represent the largest difference in efficacy that would

not matter in clinical practice. Treatment differences within this margin would thus, by definition,

be acceptable because they have no clinical relevance.

Similar efficacy implies that similar treatment effects can be achieved when using the same

dosage(s); in the head-to-head comparative trial(s), the same dosage(s) should be used for both

the SBP and RBP. In cases for which the medicinal product is titrated according to treatment

response (e.g. epoetin, insulin) rather than given at a fixed dosage (e.g. somatropin in GH-deficient children), equivalence/ non-inferiority should be demonstrated not only with regard to

treatment response but also with regard to dosage. This is best achieved by defining co-primary

endpoints that also include dosage.

Generally, equivalence trials are clearly preferable to ensure that the SBP is not clinically less or

more effective than the RBP when used at the same dosage(s). For medicinal products with a

wide safety margin, non-inferiority trials may also be acceptable. It should, however, be

considered that non-inferior efficacy, by definition, does not exclude the possibility of superior

efficacy of the SBP compared to the RBP which, if clinically relevant, would contradict the

principle of similarity.

Therefore, prior to initiating the confirmatory clinical trial, all comparative data generated

between the SBP and RBP up to this point should be carefully reviewed and analysed to

ascertain similarity of the SBP and the RBP. The confirmatory trial marks the last step of the

comparability exercise and prior demonstration of similar physicochemical characteristics,

potency and PK/PD profiles make superior efficacy of the SBP compared to the RBP highly

unlikely. However, in the rare event that, after completion of the study, the results would indeed

indicate statistically superior efficacy it should be excluded that this superiority is clinically

Page

23

meaningful and could be associated with increased adverse events if the SBP is prescribed at the

same dosage as the RBP. In the case of an equivalence trial clinically meaningful differences,

including superior efficacy, between the SBP and the RBP are excluded if the 95% confidence

interval of the treatment difference is fully contained within the pre-specified two-sided (upper

and lower) comparability margins. In the case of a non-inferiority trial, a post-hoc justification

that superior efficacy, if observed, is not clinically meaningful may be more difficult.

Whatever the pre-defined study design, the real results obtained from the clinical trial(s) will

determine whether the SBP and the RBP can be considered clinically similar. If clinically

relevant differences are found, the new product should not be considered similar to the RBP and

should be developed as a stand alone product.

Whereas several examples exist for licensing of SBPs based on equivalence trials (e.g.

recombinant human GH, epoetin and G-CSF in the EU), experience with non-inferiority trials for

this purpose is limited and mainly based on theoretical considerations. An additional advantage

of demonstration of equivalent efficacy (rather than non-inferior efficacy) is that this would

provide a stronger rationale for the possibility of extrapolation of efficacy data to other

indications of the RBP, particularly if these include different dosages than the one(s) tested in the

clinical trial (see section 10.7).

Advantages and disadvantages of equivalence/ non-inferiority designs for

SBPs

An equivalence trial is designed to confirm the absence of a clinically meaningful difference

between the SBP and the RBP. This is the most suitable design for confirming that SBP is

equivalent to the RBP which is in line with the principle of similarity since a non-inferiority trial

does not exclude the possibility that the SBP is shown to be statistically and clinically superior to

the RBP which contradicts the principle of similarity. The following table highlights the

advantages and disadvantages of each design.

Design

Equivalence

Advantages

Demonstration of equivalence

provides a strong rationale for the

possibility of extrapolation of

efficacy to other indications of the

RBP

Disadvantages

An equivalence trial tends to need a

larger sample size to achieve the same

study power as a non-inferiority trial

A finding of superiority would lead to

the failure of the equivalence trial.

Current experience for the There would be no option to show that

licensing of SBPs is based on the superiority observed is not

equivalence trials clinically relevant. However, a stand

alone application might still be an

option subject to a requirement for

additional studies

Page 24

Non-inferiority A non-inferiority trial requires a

smaller sample size to achieve the

same study power as an

equivalence trial.

Post-hoc justification that a finding of

statistically superior efficacy is not

clinically relevant is difficult. If the

superiority observed is considered

clinically relevant, then the SBP would

A finding of superiority of the

not be considered similar to the RBP

SBP compared to the RBP would

and should be developed as a stand

not lead to failure of a non-alone product.

inferiority trial, provided it can be

demonstrated that the superiority Demonstration that superior efficacy of

observed is not clinically relevant. the SBP is not associated with

increased adverse events if the SBP is

prescribed at the same dosage as the

RBP would be required in all cases.

Demonstration of non-inferiority does

not provide a strong rationale for the

possibility of extrapolation to other

indications of the RBP.

There is currently no experience with

licensing of SBPs based on non-inferiority trials.

Statistical considerations for the design and analysis of equivalence/ non-inferiority trials for SBPs

As indicated above, equivalence or non-inferiority studies may be acceptable for the comparison

of efficacy and safety of the SBP with the RBP. The choice of the clinical trial design will

depend on the product in question, its intended use, disease prevalence and the target population.

The specific design selected for a particular study should be clearly stated in the trial protocol

and justified. The statistical issues involved in designing, analysing and interpreting equivalence

and non-inferiority trials are complex and often very subtle. This section is intended to

emphasize the importance of the points that need to be considered in designing and analysing

equivalence and non-inferiority trials and does not provide a comprehensive overview of all

statistical considerations. In particular, a good understanding of statistical confidence intervals

and their application to equivalence and non-inferiority clinical trials is essential.

Irrespective of the trial design selected, a comparability margin should be specified during trial

design and clearly documented in the study protocol. For an equivalence trial, both the lower and

upper equivalence margins are required, while only one margin is required for a non-inferiority

trial. The selection of the margin should be given careful consideration and should be justified

both statistically and clinically. Adequate evidence of the effect size of the RBP should be

provided to support the proposed margin. The magnitude and variability of the effect size of the

RBP derived from historical trials should also be taken into consideration in determining the

Page

25

comparability margin both in terms of the endpoint chosen and the population to be studied. It

must be reasonably assured that if a difference between the RBP and SBP exists, then the study

is capable of showing that difference (this is referred to as “assay sensitivity”).

Statistical analysis for both equivalence and non-inferiority designs is generally based on the use

of two sided confidence intervals (typically at the 95% level) for the difference between

treatments. For equivalence trials, equivalence is demonstrated when the entire confidence

interval falls within the lower and upper equivalence margins. Non-inferiority evaluations are

one sided and statistical inference is based only on the lower or upper confidence limit,

whichever is appropriate for a given study. For example, if a lower margin is defined, non-inferiority is demonstrated when the lower limit of the confidence interval is above the non-inferiority margin. Analysis of non-inferiority trials can also be based on a one-sided confidence

interval at the 97.5% level.

Details of the sample size calculations should be provided in the study protocol. The basis of

estimates of any quantities used in the sample size calculation should also be clearly explained,

and these estimates will usually be based on results from earlier trials with the RBP or published

literature. Since the formulae for sample size calculations are slightly different between

equivalence and non-inferiority trials, and the two sided equivalence trial tends to need a larger

sample size than a one sided non-inferiority trial, sample size calculations should be based on

methods specifically designed for equivalence or non-inferiority trials. When estimating the

sample size for equivalence or non-inferiority trials it is usually assumed that there is no

difference between SBP and RBP. An equivalence trial could be underpowered if the true

difference is not zero. Similarly, a non-inferiority trial could be underpowered if the SBP is

actually less effective than the RBP. Determination of the appropriate sample size is dependent

on various factors including: the type of primary endpoint (e.g. binary, quantitative, time-to-event etc.), the pre-defined comparability margin, the probability of a type I error (falsely

rejecting the null hypothesis) and the probability of a type II error (erroneously failing to reject

the null hypothesis). Keeping the probability of a type II error low will increase the ability of the

study to show equivalence or non-inferiority of the SBP to the RBP. The expected rates of

patient dropouts and withdrawals should also be taken into consideration in the determination of

the sample size.

10.5 Safety

Pre-licensing safety data should be obtained in a sufficient number of patients to characterize the

safety profile of the SBP. Depending on their size and duration, efficacy trials may be sufficient

or may need to be extended to provide an adequate safety database. Comparison with the RBP

should include type, frequency and severity of adverse events/reactions. For cases in which

similar efficacy is demonstrated in confirmatory PK/PD studies but safety data relevant for the

target population cannot be deduced from these studies, safety data in the target population are

still needed. For example, for two soluble insulins, the euglycaemic clamp study is considered

the most sensitive method to detect differences in efficacy. However, immunogenicity and local

tolerance of subcutaneously administered SBP cannot be assessed in such a study and should

therefore be evaluated in the target population.

Page 26

Safety data should preferably be comparative. Comparison with an external control group is

usually hampered by differences in the investigated patient population and concomitant therapy,

observation period and/or reporting.

Safety data obtained from the clinical trials can be expected to mainly detect frequent and short-term adverse events/reactions. Such data are usually sufficient pre-licensing, but further close

monitoring of clinical safety of the SBP is usually necessary in the post-marketing phase (see

section 11).

10.6 Immunogenicity

Immunogenicity of biotherapeutic products should always be investigated pre-authorization.

Even if efficacy and safety of a SBP and RBP have been shown to be similar, immunogenicity

may still be different.

The immune response against a biotherapeutic is influenced by many factors such as the nature

of the drug substance, product- and process-related impurities, excipients and stability of the

product, route of administration, dosing regimen, and patient-, disease- and/or therapy-related

factors 10.

The consequences of unwanted immunogenicity may vary considerably, ranging from clinically

irrelevant to serious and life-threatening. Although neutralizing antibodies directly alter the

pharmacodynamic effect of a product (i.e. by directly blocking active site of the protein), binding

antibodies often affect pharmacokinetics and thereby also influence pharmacodynamics. Thus, an

altered effect of the product due to anti-product antibody formation might be a composite of

pharmacokinetic, pharmacodynamic and safety effects.

Immunogenicity of a biotherapeutic should always be investigated in humans since animal data

are usually not predictive of the immune response in humans. The frequency and type of

antibodies induced as well as possible clinical consequences of the immune response should be

compared for the SBP and the RBP. Comparison with an external control group is not considered

appropriate because this is usually hampered by differences in the investigated patient population,

observation period, sampling time points, assays employed, and interpretation of results.

Generally, the amount of immunogenicity data obtained from the comparative efficacy trial(s)

(i.e. trials that are powered for their primary efficacy endpoint) will allow detection of a marked

increase in immunogenicity of the SBP compared to the RBP and will be sufficient pre-licensing.

Where clinically meaningful or even serious antibody development has been encountered with

the RBP or the substance class but is too rare to be captured pre-licensing (e.g. cross-reacting

neutralizing anti-epoetin antibodies causing pure red cell aplasia), a specific risk management

plan (RMP) for the SBP may be necessary to assess this specific risk post-marketing (see section

11). In case similar efficacy is demonstrated in confirmatory PK/PD study(ies), immunogenicity

data in the target population are still needed (see section 10.5). If the manufacturer intends to

extrapolate efficacy and safety data to other approved indications of the RBP (see section 10.7),

care should be taken to ensure that immunogenicity is investigated in the patient population that

carries the highest risk of an immune response and immune-related adverse events.

Page

27

The manufacturer will need to justify their antibody testing strategy including the selection,

assessment, and characterization of assays, identification of appropriate sampling time points

including baseline, sample volumes and sample processing/storage as well as selection of

statistical methods for analysis of data. Antibody assays need to be validated for their intended

purpose. A screening assay of sufficient sensitivity should be used for antibody detection and a

neutralization assay should be available for further characterization of antibodies, if present.

Possible interference of the circulating antigen with the antibody assay(s) should be taken into

account. Detected antibodies need to be further characterized and their potential clinical

implications regarding safety, efficacy and pharmacokinetics evaluated. For example, the isotype

of the antibodies should be determined if they may be predictive of safety (e.g. development of

IgE antibodies correlates with the development of allergic and anaphylactic responses). If the

antibody incidence is higher with the use of the SBP compared to the RBP, the reason for the

difference needs to be investigated. Special attention should be paid to the possibility that the

immune response seriously affects the endogenous protein and its unique biological function.

The required observation period for immunogenicity testing will depend on the intended duration

of therapy and the expected time of antibody development and should be justified by the

manufacturer. In the case of chronic administration, one-year data will usually be appropriate

pre-licensing to assess antibody incidence and possible clinical implications. This is, for example,

the case for somatropin-containing products, where antibody development usually occurs within

the first 6-9 months of treatment but potential effects on growth would only be seen thereafter. In

some cases, shorter pre-licensing observation periods may be sufficient; e.g. for insulins, where

most susceptible patients will develop antibodies within the first 6 months of treatment and

clinical consequences, if any, would usually be observed around the same time as antibody

development. If considered clinically relevant, development of antibody titers, their persistence

over time, potential changes in the character of the antibody response and the possible clinical

implications should be assessed pre- and post-marketing.

Since pre-licensing immunogenicity data are often limited, further characterization of the

immunogenicity profile may be necessary post-marketing, particularly, if rare antibody-related

serious adverse events may occur that are not likely to be detected in the pre-marketing phase.

10.7 Extrapolation of efficacy and safety data to other clinical indications

If similar efficacy and safety of the SBP and RBP have been demonstrated for a particular

clinical indication, extrapolation of these data to other indications of the RBP (not studied in

independent clinical studies with the SBP) may be possible if all of the following conditions are

fulfilled:

• A sensitive clinical test model has been used that is able to detect potential differences

between the SBP and the RBP;

• The clinically relevant mechanism of action and/or involved receptor(s) are the same; e.g.

GH action in different conditions of short stature in children; erythropoiesis-stimulating action of

epoetins in different conditions associated with anaemia or for the purpose of autologous blood

donation. If the mechanism of action is different or not known a strong scientific rationale and

additional data (e.g. “PD fingerprint”, additional clinical data) will be needed;

Page 28

• Safety and immunogenicity of the SBP have been sufficiently characterized and there are

no unique/additional safety issues expected for the extrapolated indication(s), for which clinical

data on the SBP are not being provided; e.g. immunogenicity data in immunosuppressed patients

would not allow extrapolation to an indication in healthy subjects or patients with autoimmune

diseases while the reverse would be valid;

• If the efficacy trial used a non-inferiority study design and demonstrated acceptable

safety and efficacy of the SBP compared to the RBP, the applicant should provide convincing

arguments that this finding can be applied to the extrapolated indications; e.g. results from a non

inferiority trial in an indication where a low dose is used may be difficult to extrapolate to an

indication where a higher dose is used, from both efficacy and safety point of view.

If these prerequisites for extrapolation of efficacy and safety data of the SBP to other

indication(s) of the RBP are not fulfilled, the manufacturer will need to submit own clinical data

to support the desired indication(s).

If extrapolation of results from clinical studies for one indication to one or more different

indications is intended, a detailed scientific discussion on the benefit/ risk of such a proposal

should be provided based on the above criteria.

11 Pharmacovigilance

As for most biological medicines, data from pre-authorization clinical studies are usually too

limited to identify all potential unwanted effects of a SBP. In particular, rare adverse events are

unlikely to be encountered in the limited clinical trial populations being tested with the SBP.

Therefore, further close monitoring of the clinical safety of these products in all approved

indications and a continued benefit-risk assessment is necessary in the post-marketing phase.

The manufacturer should submit a safety specification and pharmacovigilance plan at the time of

submission of the marketing authorization application. The principles of pharmacovigilance

planning can be found in relevant guidelines such as ICH E2E 11. The safety specification should

describe important identified or potential safety issues for the RBP, the substance class and/or

any that are specific for the SBP. The pharmacovigilance plan should describe the planned post-marketing activities and methods based on the safety specification 11. In some cases, risk

minimization measures such as educational material for patients and/or treating physicians may

enhance the safe use of the SBP.

Any specific safety monitoring imposed on the RBP or product class should be incorporated into

the pharmacovigilance plan for the SBP, unless a compelling justification can be provided to

show that this is not necessary. Moreover, potential additional risks identified during the review

of the data obtained with the SBP should be subject to further safety monitoring (e.g. increased

immunogenicity that might result from a difference in the glycosylation profile).

Page

29

Post-marketing safety reports should include all information on product tolerability received by

the marketing authorization holder. The safety information must be evaluated in a scientific

manner and should include evaluation of the frequency and causality of adverse events.

Manufacturers should ensure that, at the time of the marketing authorization, they have in place

an appropriate pharmacovigilance system including the services of a qualified person responsible

for monitoring pharmacovigilance and the necessary means for the notification of adverse

reactions that occur in any of the countries where the product is marketed.

After the marketing authorization is granted, it is the responsibility of the NRA to closely

monitor the compliance of manufacturers with their marketing commitments, where appropriate,

and particularly with their pharmacovigilance obligations (as previously described).

In addition, as for all biotherapeutics, an adequate system is necessary to ensure specific

identification of the SBPs (i.e. traceability). The NRA shall provide a legal framework for proper

pharmacovigilance surveillance and ensure the ability to identify any biotherapeutics marketed in

their territory which is the subject of adverse reaction reports. This implies that an adverse

reaction report for any biotherapeutic should include, in addition to the International

Nonproprietary Names (INN) 12, other important indicators such as proprietary (brand) name,

manufacturer’s name, lot number and country of origin.

12 Prescribing information and label

The SBP should be clearly identifiable by a unique brand name. Where an INN is defined, this

should also be stated. WHO policy on INNs should be followed

(/medicines/services/inn/innquidance/en/). Provision of the lot

number is essential as this is an important part of production information and is critical for

traceability in cases where problems with a product are encountered.

The prescribing information for the SBP should be as similar as possible to that of the RBP

except for product-specific aspects, such as different excipient(s). This is particularly important

for posology and safety-related information, including contraindications, warnings and adverse

events. However, if the SBP has fewer indications than the RBP, the related text in various

sections may be omitted unless it is considered important to inform doctors and patients about

certain risks; e.g. because of potential off-label use. In such cases it should be clearly stated in

the prescribing information that the SBP is not indicated for use in the specific indication(s) and

the reasons why. The NRA may choose to mention the SBP nature of the product and the studies

that have been performed with the SBP including the specific RBP in the product information

and/or to include instructions for the prescribing physician on how to use SBP products.

13 Roles and responsibilities of NRAs

One of the responsibilities of a NRA is to set up appropriate regulatory oversight for the

licensing and post-marketing surveillance of SBPs that are developed and/or authorized for use

Page 30

in its area of jurisdiction. The experience and expertise of NRA in evaluating biotherapeutic

products is a key prerequisite for appropriate regulatory oversight of these products. The NRA is

responsible for determining a suitable regulatory framework for licensing SBPs. The NRA may

choose to utilize or amend existing pathways or develop a new pathway for this purpose.

As development of biotherapeutic products is a rapidly evolving area, regular review of the

NRAs for their licensing, the adequacy of the regulations for providing oversight, and the

processes and policies that constitute the regulatory framework is an essential component of a

well-functioning and up-to-date regulatory oversight for biotherapeutics.

A NRA may possess the regulatory authority for authorization of all new drugs and as such may

not need to amend its regulations to authorize SBPs. However, the EU has specifically amended

its regulations to provide an abbreviated regulatory pathway for SBPs (biosimilars) 13, 14, 15, 16. This

issue is subject of discussion in a number of other countries where development of SBPs is

ongoing. For instance, Health Canada and Japan have recently developed their guidelines for

manufacturers, and national guidelines are in development in some other countries. The

historical perspective of US FDA on the assessment of follow-on protein products has also been

published 17. In most instances, NRAs will need to provide guidance to manufacturers on the

information needed and regulatory requirements for the authorization of SBPs. A majority of

countries will either be using their existing legislation and applicable regulations or they will

amend or develop entirely novel frameworks for the authorization of SBPs. In some jurisdictions,

regulations for licensing subsequent entry versions of biotherapeutic products are intricately

linked with policies for innovation. Hence a NRA may need to coordinate with other

stakeholders for consistency.

Page

31

Authors and acknowledgements

The scientific basis for the evaluation and regulation of similar biotherapeutic products was

discussed and agreement for developing WHO Guidelines reached at the first WHO Informal

Consultation on Regulatory Evaluation of Therapeutic Biological Medicinal Products held in

Geneva, 19-20 April 2007, attended by the following participants:

Dr A. Bristow, Dr E. Gray, Dr R. Thorpe, and Dr J. S. Robertson, National Institute for

Biological Standardization and Control, Potters Bar, London, UK; Dr M. Cheraghali, Iran Blood

Transfusion Organization, Tehran, Iran; Dr L. G. Castanheira and Dr G. Garcia de Oliveira,

Agencia Nacional da Vigilancia Sanitaria, Brasília, Brazil; Dr E. Griffiths and Dr K. Nyarko,

Health Canada, Ottawa, Canada; Dr U. Kalinke, Paul-Ehrlich-Institut, Langen, Germany; Dr T.

Kawanishi and Dr T. Yamaguchi, National Institute for Health and Science, Tokyo, Japan; Dr J.

C. Krayenbühl and Ms M. Schmid-Appert, Swissmedic, Bern, Switzerland; Ms M. Poulis,

Therapeutic Goods Administration, Wooden, Australia; Dr H. Schellekens, Utrecht University,

Utrecht, Netherlands; Dr Y. Sohn, Korea Food and Drug Administration, Seoul, Republic of

Korea; Dr J. Southern, Ministry of Health, CapeTown, South Africa; Dr K. Webber, Food and

Drug Administration, Silverspring, Maryland, USA; Dr M. Weise, Federal Institute for Drugs

and Medical Devices, Bonn, Germany; Dr P. J. Gogoi, Ministry of Health & Family Welfare,

Guwahati, India; Dr W. Junzhi, National Institute for the Control of Pharmaceutical and

Biological Products, Beijing, China; Dr P. Richardson, European Medicines Agency, London,

UK; Dr S. Gairola, Serum Institute of India Ltd, Pune, India, Representative of the Developing

Country Vaccine Manufacturing Network (DVCMN); Dr J. Mascaro, Hoffman La Roche, Basel,

Switzerland, Representative of the International Federation of Pharmaceutical Manufacturers and

Associations (IFPMA); Dr A. Fox, Amgen, Cambridge, UK, Representative of IFPMA; Dr R.

Krause, IFPMA, Geneva, Switzerland; Dr M. Schiestl, Sandoz, Kundl/ Tirol, Austria,

Representative of the European Generic medicines Association (EGA); Ms S. Kox, EGA,

Brussels, Belgium; Dr A. Eshkol, International Association for Biologicals (IABS), Geneva,

Switzerland; Dr R. Balocco-Mattavelli, Dr S. Lasseur, Dr J. Dong, Quality Assurance and Safety

of Medicines unit, Medicines Policy and Standards Department, World Health Organization,

Geneva, Switzerland; Dr D. Wood, Dr I. Knezevic and Dr J. Joung, FCH/IVB/QSS, World

Health Organization, Geneva, Switzerland.

The first draft of the guidelines was developed by the members of the WHO drafting group on

similar biotherapeutic products following the meeting held at the Federal Institute for Drugs and

Medical devices (BfArM), Bonn, Germany, on 5 - 7 March 2008, attended by:

Dr Elwyn Griffiths and Dr Kwasi Nyarko, Biologics and Genetic Therapies Direcctorate, Health

Canada, Ottawa, Canada; Dr Hans-Karl Heim and Dr Martina Weise, Federal Institute for

Drugs and Medical Devices (BfArM), Bonn, Germany; Dr Yeowon Sohn, Korea Food and Drug

Administration, Seoul, Republic of Korea; Dr Ivana Knezevic and Dr Jeewon Joung,

FCH/IVB/QSS, World Health Organization, Geneva, Switzerland.

The second draft of these guidelines (BS/08.2101) was prepared by Dr Elwyn Griffiths and Dr

Kwasi Nyarko, Biologics and Genetic Therapies Directorate, Health Canada, Ottawa, Canada;

Dr Martina Weise, Federal Institute for Drugs and Medical Devices (BfArM), Bonn, Germany;

Dr Ivana Knezevic and Dr Jeewon Joung, FCH/IVB/QSS, World Health Organization, Geneva,

Page 32

Switzerland, after a WHO Informal Consultation on Regulatory Evaluation of Therapeutic

Biological Medicines in Seoul, Republic of Korea, 27-29 May, 2008, and acknowledgements are

due to the following participants:

Dr R. Thorpe and Dr M. Wadhwa, National Institute for Biological Standardization and Control,

Potters Bar, London, UK; Dr M. Cheraghali, Iran Blood Transfusion Organization, Tehran, Iran;

Dr P. Thanaphollert, Food and Drug Administration, Nonthaburi, Thailand; Dr E. Griffiths and

Dr K. Nyarko, Health Canada, Ottawa, Canada; Dr T. Yamaguchi, National Institute for Health

and Science, Tokyo, Japan; Dr Y. Sohn and Dr S. Hong, Korea Food and Drug Administration,

Seoul, Republic of Korea; Dr J. Southern, Ministry of Health, CapeTown, South Africa; Dr E.

Shacter, Food and Drug Administration, Bethesda, Maryland, USA; Dr M. Weise and Dr H.

Heim, Federal Institute for Drugs and Medical Devices, Bonn, Germany; Dr P. J. Gogoi,

Ministry of Health & Family Welfare, Guwahati, India; Dr W. Junzhi, National Institute for the

Control of Pharmaceutical and Biological Products, Beijing, China; Dr P. Richardson, European

Medicines Agency, London, UK; Dr S. Gairola, Serum Institute of India Ltd, Pune, India,

Representative of DCVMN; Dr H. Ji, LG life Science, Seoul, Republic of Korea, representative

of DCVMN; Dr J. Mascaro, Hoffman La Roche, Basel, Switzerland, Representative of IFPMA;

Dr A. Fox, Amgen, Cambridge, UK, Representative of IFPMA; Dr R. Krause, IFPMA, Geneva,

Switzerland; Dr M. Schiestl, Sandoz, Kundl/Tirol, Austria, Representative of EGA; Dr S. Eisen,

TEVA, London, UK, representative of EGA; Ms S. Kox, EGA, Brussels, Belgium; Dr M. L.

Pombo, Pan American Health Organization, Washington DC, USA; Dr I. Knezevic and Dr

Jeewon Joung, FCH/IVB/QSS, World Health Organization, Geneva, Switzerland.

Taking into account comments and advise provided by the ECBS on the BS/08.2101, the third

draft was prepared by the drafting group members following the meeting in Tokyo, Japan, 16

and 18 February, 2009, attended by:

Dr Seung Hwa Hong and Dr Jeewon Joung, Korea Food and Drug Administration, Seoul,

Republic of Korea; Dr Kwasi Nyarko, Biologics and Genetic Therapies Directorate, Health

Canada, Ottawa, Canada; Dr Peter Richardson, European Medicines Agency (EMEA), Quality

of Medicines Sector, London, UK; Dr Emily Shacter and Dr Keith Webber, Food and Drug

Administration, Bethesda, Maryland, USA; Dr Martina Weise, Federal Institute for Drugs and

Medical Devices (BfArM), Bonn, Germany; Dr Teruhide Yamaguchi, National Institute of

Health Sciences, Japan; Dr Ivana Knezevic and Dr Hye-Na Kang, FCH/IVB/QSS, World Health

Organization, Geneva, Switzerland.

The forth draft of these revised guidelines was prepared by Dr Elwyn Griffiths, Dr Catherine

Njue, and Dr Kwasi Nyarko, Biologics and Genetic Therapies Directorate, Health Canada,

Ottawa, Canada; Dr Hans-Karl Heim and Dr Martina Weise, Federal Institute for Drugs and

Medical Devices (BfArM), Bonn, Germany; Dr Jeewon Joung, Korea Food and Drug

Administration, Seoul, Republic of Korea; Dr Teruhide Yamaguchi, National Institute of Health

Sciences, Japan; Dr Ivana Knezevic and Dr Hye-Na Kang, FCH/IVB/QSS, World Health

Organization, Geneva, Switzerland, after a WHO/HC Consultation on Regulatory Considerations

in Evaluating Similar Biotherapeutic Products in Ottawa, Canada, 15-17 July, 2009, and

acknowledgements are due to the following participants:

Page

33

Mrs A. Abas, Ministry of Health Malaysia, Jalan University, Selangor, Malaysia; Dr K. Baek,

Korea Food and Drug Administration, Seoul, Republic of Korea; Dr S. Kozlowski,

FDA/CDER/OPS, Bethesda, MD, USA; Dr H. M. J. Leng, School of Pharmacy University of the

Western Cape, South Africa; Dr J. Luo, States Food and Drug Administration (SFDA), Beijing,

People's Republic of China; Mrs Y. H. Nunez, Centro para el Control Estatal de la Calidad de los

Medicamentos (CECMED), Habana, Cuba; Dr S. Shani, Ministry of Health and Social Welfare

Government of India FDA, New Delhi, India, Dr K. Shokraie, Food and Drug Ministry of Health,

Tehran, Iran; Dr K. Tungsanga, Chulalongkorn University, Bangkok, Thailand; Dr J. Wang,

National Institute for the Control of Pharmaceutical & Biological Products, Beijing, People's

Republic of China; Ms M. Chultem, Dr A. Klein, Dr A. Ridgway, and Dr J. Wang, Biologics and

Genetic Therapies Directorate, Health Canada, Ottawa, Canada; Dr H. Malhotra, SMS Medical

College Hospital, Jaipur, India, Representative of DCVMN; Dr P. D. Picon, Federal University

of Rio Grande do Sul, Rio Grande do Sul, Brazil, Representative of DCVMN; Dr J. Mascaro,

Elan Pharma International, Ireland, Representative of IFPMA; Dr A. Fox, Amgen, Cambridge,

UK, Representative of IFPMA; Dr S. Day, Roche Products Ltd, Hertfordshire, UK,

Representative of IFPMA; Dr M. Fletcher, Pfizer Global R&D, New London, USA,

Representative of IFPMA; Dr S. Eisen, TEVA, London, UK, representative of EGA; Dr I.

Ahmed, Hospira, IL, USA, Representative of EGA; Dr S. Balser, Sandoz Biopharmaceuticals,

Oberhaching, Germany, Representative of EGA; Dr. R. Krause, IFPMA, Geneva, Switzerland,

Representative of IABS.

Document WHO/BS/09.2110 was prepared by Dr Ivana Knezevic and Dr Hye-Na Kang, WHO

for consideration by the sixtieth meeting of the Expert Committee on Biological Standardization,

held in Geneva in 2009. Further changes were made to WHO/BS/09.2110 by the Expert

Committee on Biological Standardization, resulting in the present document. Special thanks for

Dr Catherine Njue, Health Canada, Ottawa, Canada and Dr Marie Bielsky, Medicines and

Healthcare products Regulatory Agency, London, UK for their comments and advice during the

ECBS meeting.

References

1. Guidelines for assuring the quality of pharmaceutical and biological products prepared by

recombinant DNA technology. In: WHO Expert Committee on Biological Standardization.

Forty-first report. Geneva, World Health Organization, 1991, Annex 3 (WHO Technical

Report Series, No. 814).

Requirements for the use of animal cells as in vitro substrates for the production of

biologicals. In: WHO Expert Committee on Biological Standardization. Forty-seventh

report. Geneva, World Health Organization, 1998, Annex 1 (WHO Technical Report Series,

No. 878).

WHO reference materials for cytokines/growth factors and endocrinological substances

(/bloodproducts/Catalogue/en/).

2.

3.

Page 34

4. Joung J, Robertson JS, Griffiths E, Knezevic I. WHO informal consultation on regulatory

evaluation of therapeutic biological medicinal products held at WHO Headquarters,

Geneva, 19-20 April 2007. Biologicals, 2008, 36(4):269-76.

Good manufacturing practices for biological products. In: WHO Expert Committee on

Biological Standardization. Forty-second report. Geneva, World Health Organization,

1992, Annex 1 (WHO Technical Report Series, No. 822).

ICH safety guidelines. Preclinical safety evaluation of biotechnology-derived

pharmaceuticals (S6), 1997.

ICH quality guidelines. Comparability of biotechnological/biological products subject to

changes in their manufacturing process (Q5E), 2004.

ICH efficacy guidelines. Choice of control group and related issues in clinical trials (E10),

2000.

ICH efficacy guidelines. Statistical principles for clinical trials (E9), 1998.

5.

6.

7.

8.

9.

10. Committee for Medicinal Products for Human Use. Guideline on immunogenicity

assessment of biotechnology-derived therapeutic proteins. London, European Medicine

Evaluation Agency, 2007 (CHMP/BMWP/14327).

11. ICH efficacy guidelines. Pharmacovigilance planning (E2E), 2004.

12. Meeting report on WHO Informal Consultation on International Nonproprietary Names

(INN) Policy for Biosimilar Products, 4-5 September, Geneva, 2006 (INN working report

07.211) (/medicines/services/inn/BiosimilarsINN_).

13. The European parliament and the council, Directive 2001/83/EC, Article 10(4), 6

November 2001.

14. Committee for Medicinal Products for Human Use. Guideline on similar biological

medicinal products. London, European Medicine Evaluation Agency, 2005

(CHMP/437/04).

15. Committee for Medicinal Products for Human Use. Guideline on similar biological

medicinal products containing biotechnology-derived proteins as active substance: Quality

issues. London, European Medicine Evaluation Agency, 2006 (CHMP/BMWP/49348).

16. Committee for Medicinal Products for Human Use. Guideline on similar biological

medicinal products containing biotechnology-derived proteins as active substance : non-clinical and clinical issues. London, European Medicine Evaluation Agency, 2006

(CHMP/BMWP/42832).

17. Woodcock J, Griffin J, Behrman R, Cherney B, Cresoenzi T, Fraser B, et al. FDA's assessment

of follow-on protein products: a historical perspective. Nature Reviews Drug Discovery,

2007, 6:437-42.