法国密封标准NFsealsstandards汇总

法国密封标准(NF seals standards)汇总

编号 中文名称 英文名称

(TESTING FOR LEAK TIGHTNESS BY MEANS OF

AMMONIA. LOCATING OF LEAKS BY OVERALL

PRESSURIZATION.)

(TESTING FOR LEAK TIGHTNESS BY MEANS OF

AMMONIA. LOCATING OF LEAKS BY THE

SUCTION CUP METHOD.)

(TESTING FOR LEAK TIGHTNESS.

RECOMMENDED PRACTICES FOR TESTING BY

MEANS OF A VACUUM CHAMBER.)

(TIGHTNESS CHECKS. RECOMMANDED

PRATICES FOR INVESTIGATING LEAKS USING

PRESSURISED GAS.)

(NON DESTRUCTIVE TESTING. TESTING FOR

LEAK TIGHTNESS. RECOMMENDED PRACTICES

FOR THE SPECIFICATION AND TESTING OF

GAS-TIGHTNESS.)

(Non destructive testing. Tightness testing. Testing by

accumulation or sniffing of gas.)

(Non destructive testing of steels tubes. Part 1 :

automatic electromagnetic testing of seamless and

welded (except submerged arc welded) ferromagnetic

steel tubes for verification of hydraulic leak-tightness.)

(Non-destructive testing of steel tubes - Part 2 :

automatic eddy current testing of seamless and welded

(except submerged arc-welded) austenitic and

austenitic-ferritic steel tubes for verification of)

(GAS TIGHTNESS OF EQUIPMENT FOR GAS

WELDING AND ALLIED PROCESS. (EUROPEAN

STANDARD EN 29090).)

(Aluminium and aluminium alloys. Anodizing. Part 5 :

assessment of quality of sealed anodic oxidation

coatings by measurement of admittance.)

(Aluminium and aluminium alloys. Anodizing. Part 6 :

用氨酸进行密封检验.渗NF A09-106-1979

漏的增压法定位

用氨酸进行的密封检验.NF A09-107-1979

渗漏定位法.气孔法

密封检验.减压箱检验的NF A09-108-1979

建议

密封检验.用压缩气寻找NF A09-110-1980

渗漏的建议

无损检验.密封检验.气体NF A09-490-1988 密封规范和检验用推荐方法

NF A09-491-1989

无损检验.密封性能试验.用聚气或吹气进行检测

钢管的无损检测.第1部分:证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验

钢管的无损检验.第2部分:检验液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管(埋弧焊除外)的自动涡流试验

NF

A49-875-1-1996

NF

A49-875-2-2000

气焊和相关工艺用设备NF A84-090-1992

的气体密封

铝和铝合金.阳极化.第5部分:用验收测量的密封阳极氧化物镀膜质量评估(欧洲标准EN

12373-5)

铝和铝合金.阳极化.第6NF

A91-455-5-1999

NF

A91-455-6-1999 部分:通过对未预先进行酸处理的浸入到磷酸/铬酸溶液中的质量损失的测量对密封阳极氧

铝及铝合金.阳极氧化.第7部分:测量经过磷酸和铬酸溶液酸处理浸渍后的质量损失来评定密封阳极氧化覆层的质量

assessment of quality of sealed anodic oxidation

coatings by measurement of the loss of mass after

immersion in phosphoric acid/chromic acid solution

without prior acid treatment.)

(Aluminium and aluminium alloys - Anodizing - Part

7 : assessment of quality of sealed anodic oxidation

coatings by measurement of the loss of mass after

immersion in phosphoric acid/chromic acid solut)

(GLASS. ANALYSIS OF SEALS OF TWO GLASSES

OBTAINED BY HOT WELDING.

(PHOTO-ELASTICIMETRIC METHOD).)

(Methods of test for dense shaped refractory products.

Part 3 : test methods for carbon-containing

refractories.)

(Degrees of protection provided by enclosures for

electrical equipment against external mechanical

impacts (ik code).)

NF

A91-455-7-2002

玻璃.热焊双层嵌内式密NF B30-104-1968 封玻璃的研究.(光弹性法)

密封成型耐火制品的试验方法.第3部分:含碳耐NF B40-336-1997

火制品的试验方法(欧洲标准EN 993-3)

电工设备外部自动碰撞NF C20-015-1995 的密封用提供保护的级别

NF C20-717-1995

环境试验.第2部分:试验.(Environmental testing. Part 2 : tests. Test Q : sealing.)

试验Q:密封

(Determination of polychlorinated biphenyle (pcbs) in

mineral insulating oils by packed column gas

chromatography (gc).)

(Automatic electrical controls for househod and similar

use. Part 2 : particular requirements for thermal motor

protectors for motor-compressors of hermetic and

semi-hermetic type.)

(Automatic electrical controls for household and

similar use - Part 2-4 : particular requirements for

thermal motor protectors for motor-compressors of

hermetic and semi-hermetic type.)

(Power transformer and reactor fittings - Part 3 :

protective relay for hermetically sealed

liquid-immersed transformers and reactors without

gaseous cushion.)

(Power transformes and reactor fittings - Part 3 :

protective relay for hermetically sealed

电工技术用流体.利用密封柱气相色谱法测量绝NF C27-234-1990

缘矿物油中的聚氯联二苯

家用和类似用途的自动电控制设备.第2部分:密NF C47-734-1993 封和半密封式电动压缩机热电动机保护装置的特殊要求

家用和类似用途的自动电控制器.第2-4部分:密NF

封和半密封电动压缩机C47-734/A2-2003

组的电动机热保护器的特殊要求

NF

C52-216-3-2002

NF

C52-216-3/A1-20电力变压器和反应堆配件.第3部分:无气垫的液体浸渍密封变压器和反应堆用保护继电器

电力变压器和电抗器的配件.第3部分:无气垫密

03 封的液浸式变压器和电抗器用保护继电器

liquid-immersed transformers and reactors without

gaseous cushion.)

(BATTERY CHARGERS FOR HOUSEHOLD AND

SIMILAR PURPOSES FOR SEALED

NICKEL-CADMIUM BATTERIES.

PERFORMANCE REQUIREMENTS.)

(Secondary cells and batteries containing alkaline or

other non acid electrolytes - Safety requirements for

portable sealed alkaline secondary cells and batteries.)

(Alkaline secondary cells and batteries. Sealed

nickel-cadmium rechargeable monobloc batteries in

button cell design.)

(Sealed nickel-cadmium prismatic rechargeable single

cells.)

(Secondary cells and batteries containing alkaline or

other non-acid electrolytes - Sealed nickel-cadmium

prismatic rechargeable single cells.)

家用和类似用途的蓄电NF C52-292-1982 池充电装置.镍镉密封蓄电池.工作性能规则

含碱性或非其它非酸性电解质的电池和蓄电池.NF C58-609-2001

便携密封碱性二次电池和蓄电池的安全要求

碱二次电池和蓄电池.密NF C58-611-1994 封镍镉可充电单块扭扣蓄电池设计

NF C58-622-1996

密封镍镉棱镜形可再充电单电池

含碱性或其它非酸性电解液的蓄电池和蓄电池NF C58-622-2003

组.棱柱形可充电密封镍铬单体电池

二次碱性电池和蓄电池(Alkaline secondary cells and batteries - Sealed

NF C58-625-1995 组.密封镍-镉圆柱形充电nickel-cadmium cylindrical rechargeable single cells.)

电池

碱性二次电池和电池组.NF

密封镉镍圆柱形可充单C58-625/A1-1996

体电池

碱性二次电池和电池组.NF

密封镉镍圆柱形可充单C58-625/A2-1999

体电池

架空线路用绝缘子和器NF C66-471-1978 材.金具.密封用拉杆（ＢＳ）

架空线路用绝缘子和器NF C66-473-1978 材.金具.密封加固用金属配件（ＲＳ）

NF C68-302-1999

电气装置的米制电缆密封装置

(Alkaline secondary cells and batteries - Sealed

nickel-cadmium cylindrical rechargeable single cells.)

(Alkaline secondary cells and batteries - Sealed

nickel-cadmium cylindrical rechargeable single cells.)

(INSULATORS AND FITTINGS FOR OVERHEAD

LINES. METAL FITTINGS. SEALING ARM (BS).)

(INSULATORS AND FITTINGS FOR OVERHEAD

LINES. METAL FITTINGS. SEALING

STRENGTHENING METAL FITTING (RS).)

(Metric cable glands for electrical installations.)

(Metric cable glands for electrical installations.)

NF 电气装置用米制电缆密C68-302/A1-2001 封圈

电子元件.ＣＥＮＥＬＥＣ质量保证体系.控制空NF C85-213-1982

间电荷电子管.特殊规范.盘形密封电子管

NF

C93-400-12-6-1997

电子设备用机电元件.基本试验过程和测量方法.第12部分:焊接试验.第6节:试验12f:防熔密封和机械焊接中的清洗

电子设备的电机元件.基本试验过程和测量方法.第14部分:密封试验.第7节:试验14G.撞击水

(Harmonized system of quality assessment for

electronic components. Blank detail specification. Disk

seal power tubes.)

(Electromechanical components for electronic

equipment. Basic testing procedures and measuring

methods. Part 12 : soldering tests. Section 6 : test 12f :

sealing against flux and cleaning solvents in machine

soldering.)

(Electromechanical components for electronic

equipment. Basic testing procedures and measuring

methods. Part 14 : sealing tests. Section 7 : test 14g :

impacting water.)

NF

C93-400-14-7-1998

NF

C93-472-6-1997

(ELECTROMECHANICAL COMPONENTS FOR

电子设备的电机元件.基ELECTRONIC EQUIPMENT. BASIC TESTING

本试验过程和测量方法.PROCEDURES AND MEASURING METHODS.

第12部分:焊接试验.第6PART 12 : SOLDERING TESTS. SECTION 6 : TEST

节:试验12F:机械焊接过12F : SEALING AGAINST FLUX AND CLEANING

程中对液体和清洁 SOLVENTS IN MACHINE SOLDERING.

(EUROPEAN STANDARD EN 60 512-12-6).)

光学纤维互联元件和无源元件.基本试验和测量过程.第2-23部分:试验.纤维光学装置非压力封闭密封

纤维光学连接装置和无源元件.基本试验和测量程序.第2-25部分:试验.闭合的密封持久性(欧洲标准EN 61 300-2-2

光纤互连设备和无源元件.基本试验和测量程序.第2部分第38节:试验.纤维光学设备的压合密封

(Fibre optic interconnecting devices and passive

components. Basic test and measurement procedures.

Part 2-23 : tests. Sealing for non-pressurized closures of

fibre optic devices.)

NF

C93-902-23-1997

NF

C93-902-25-1998

(Fibres optic interconnecting devices and passive

components. Basic test and measurements procedures.

Part 2-25 : tests. Sealing endurance for closures.)

NF

C93-902-38-1998

(Fibres optic interconnecting devices and passive

components. Basic test and measurements procedures.

Part 2-38 : tests. Sealing for pressurized closures of

fibre optic devices.)

(Mechanical standardization of semiconductor devices -

Part 6-8 : general rules for the preparation of outline

drawings of surface mounted semiconductor device

packages - Design guide for glass sealed)

(Semiconductor devices - Mechanical and climatic test

methods - Part 20 : resistance of plastic-encapsulated

半导体器件的机械标准化.第6-8部分:表面安装NF

半导体器件封装外形图C96-013-6-8-2002

绘制的一般规则.玻璃密封的陶瓷四边形扁平

NF

C96-022-20-2003

半导体器件.机械和气候试验方法.第20部分:塑

料密封的SMDs抗湿气和钎焊热的综合影响

NF

C96-022-31-2003

半导体器件.机械和气候试验方法.第31部分:塑料密封器件的易燃性(内部引起的)

SMDs to the combined effect of moisture and soldering

heat.)

(Semiconductor devices - Mechanical and climatic test

methods - Part 31 : flammability of

plastic-encapsulated devices (internally induced).)

(Specification for dedicated LPG appliances - Room

sealed LPG space heating equipment for installation in

vehicles and boats.)

专用液化石油气设施规范.车辆和小艇中安装的NF D35-357-2000

房间用密封式液化石油气空间加热设备

NF

D36-106-1-1997

(SEALING MATERIALS FOR METALLIC

和第1,第2及第3族气体THREADED JOINTS IN CONTACT WITH 1ST,

以及热水接触的金属螺2ND AND 3RD FAMILY GASES AND HOT

纹连接用密封材料.第1WATER. PART 1 : ANAEROBIE JOINTING

部分:厌氧密封材料 COMPOUNDS. (EUROPEAN STANDARD EN

751-1).)

和第1,第2及第3族气体以及热水接触的金属螺纹连接用密封材料.第2部分:非时效硬化的密封材料

和第1,第2及第3族气体以及热水接触的金属螺纹连接用密封材料.第3部分:非烧结的PTFE带材

(SEALING MATERIALS FOR METALLIC

THREADED JOINTS IN CONTACT WITH 1ST,

2ND AND 3RD FAMILY GASES AND HOT

WATER. PART 2 : NON-HARDENING JOINTING

COMPOUNDS. (EUROPEAN STANDARD EN

751-2).)

(SEALING MATERIALS FOR METALLIC

THREADED JOINTS IN CONTACT WITH 1 ST,

2ND AND 3RD FAMILY GASES AND HOT

WATER. PART 3 : UNSINTERED PTFE TAPES.

(EUROPEAN STANDARD EN 751-3).)

(Homogeneous rubber materials for dynamic seals in

domestic appliances using combustible gases up to 200

mbar.)

(Rubber materials for seals and diaphragms for gas

appliances and gas equipment.)

(Means for resealing threaded joints of gas pipework in

buildings.)

NF

D36-106-2-1997

NF

D36-106-3-1997

制作200mbar以下压力家用燃气设备用动态密NF D36-202-1991

封垫圈的匀质橡胶材料.(欧洲标准 EN 279)

NF D36-205-1995

NF D36-210-2001

燃气器具的密封和膜片用橡胶材料

建筑物燃气管道工程的螺纹接头再密封的方法

螺纹密封的(燃气)管道螺(Pipe threads where pressure tight joints are made on

NF E03-004-1981 纹(锥形外螺纹和圆柱形the threads (tapered external thread and parallel internal

内螺纹) thread).)

NF

E03-005-1-2003

非压力密封连接的管螺(Pipe threads where pressure-tight joints are not made

纹 第1部分:标记、尺寸on the threads - Part 1 : dimensions, tolerances and

和公差 designation.)

无螺纹密封的(燃气)管道(Pipe threads where pressure tight joints are not made

NF E03-005-1981 螺纹(圆柱形内螺纹和外on the threads (parallel internal and external threads).)

螺纹)

NF

E03-005-2-2003

非螺纹密封的管螺纹 第2部分:用极限量规检验

(Pipe threads where pressure-tight joints are not made

on the threads - Part 2 : verification by means of limit

gauges.)

(Checking of pipe threads where pressure tight joints

are made on the threards with limit gauges (according

to NF E 03-004).)

(Technical drawings. Seals for dynamic application.

Part 1 : general simplified representation.)

(Technical drawings. Seals of dynamic application. Part

2 : detailed simplified representation.)

(METRIC SCREW HEXAGON HEAD METAL

PLUGS WITH COLLAR JOINTS FOR USE WITH O.

RINGS.)

(RAG BOLTS.)

称作“煤气管道”的管路螺纹.用极限规检查圆柱NF E03-165-1984 螺纹.螺纹密封的管道螺纹(按标准ＮＦＥ０３－００４)

NF

E04-130-1-1995

NF

E04-130-2-1995

技术制图.动密封应用.第1部分:简化画法

技术制图.动密封应用.第2部分:简化画法细则

凸肩对接公制螺纹金属NF E27-433-1984 螺塞.六角头与Ｏ形密封垫圈

NF E27-811-1970 鱼尾形密封销

(PIPEWORKS. FLEXIBLE METAL HOSES

管道.双咬边金属软DOUBLE INTERLOCK,ASBESTOS

NF E29-833-1979 管.(石棉垫片，密封，圆PACKING,PRESSURE-TIGHT,CIRCULAR

截面，奥氏体不锈钢制)

SECTION,IN AUSTENITIC STAINLESS STEEL.)

NF E44-160-2003

NF E44-170-2001

NF E48-034-1990

无密封旋转动力泵.II级.规范

机械密封.主要尺寸、名称与符号、材料编码

液压传动.液压缸.小摩擦力活塞杆的密封壳.尺寸

(Seal-less rotodynamic pumps - Class II -

Specification.)

(Mechanical seals - Principal dimensions, designation

and material codes.)

(Hydraulic fluid power. Cylinders. Seal housing for

low-friction rods. Dimensions.)

(Hydraulic fluid power. Cylinders. Seal-incorporating

bearing ring housing for pistons. Dimensions.)

液压传动.千斤顶.活塞导NF E48-039-1987 向环密封垫圈连接槽.尺寸

NF

E48-050-1-1994

液压传动的连接和一般应用.油口和具有ISO261(Connections for fluid power and general use. Ports and

螺纹和O型环密封的螺stud ends with iso 261 threads and O-ring sealing. Part

柱端头.第1部分:载头壳1 : ports with O-ring seal in truncated housing.)

体内具有O形环的油口

液压传动的连接和一般(Connections for fluid power and general use. Ports and NF

E48-050-2-1994 应用.油口和具有ISO261stud ends with iso 261 threads and O-ring sealing. Part

螺纹和O型环密封的螺2 : heavy-duty (S series) stud ends. Dimensions, design,

柱端头.第2部分:重载(Stest methods and requirements.)

系列)螺柱端头.尺寸

液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第3部分:轻载(L系列)螺柱端头.尺寸

(Connections for fluid power and general use. Ports and

stud ends with iso 261 threads and O-ring sealing. Part

3 : light-duty (L series) stud ends. Dimensions, design,

test methods and requirements.)

NF

E48-050-3-1994

NF

E48-065-1-2000

一般用途和液压动力连接.带弹性体密封或金属(Connections for general use and fluid power - Ports

对金属密封的ISO 261螺and stud ends with ISO 261 threads with elastomeric or

纹的孔和钝末端.第1部metal-to-metal sealing - Part 1 : threaded ports.)

分:螺纹孔

一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第2部分:带弹性体密封的

一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第2部分:带金属对金属密

旋转轴唇型密封件.第2部分:词汇

土方机械操作者的工作环境.第3部分:操作者密封驾驶室的加压检验法

土方机械操作者的工作环境.第4部分:操作者密封驾驶室的通风,加热和/或空调检验法

土方机械操作者的工作环境.第5部分:操作者密封驾驶室的挡风玻璃的除霜系统的检验法

土方机械操作者的工作环境.第6部分:操作者密封驾驶室受太阳光照射效力的测定

(Connections for general use and fluid power - Ports

and stud ends with ISO 261 threads with elastomeric or

metal-to-metal sealing - Part 2 : stud ends with

elastomeric sealing (type E).)

(Connections for general use and fluid power - Ports

and stud ends with ISO 261 threads with elastomeric or

metal-to-metal sealing - Part 3 : stud ends with

metal-to-metal sealing (type B).)

(Rotary shaft lip type seals. Part 2 : vocabulary.)

(Earth-moving machinery. Operator enclosure

environment. Part 3 : operator enclosure pressurization

test method.)

(Earth-moving machinery. Operator enclosure

environment. Part 4 : operator enclosure ventilation,

heating and/or air-conditioning test method.)

(Earth-moving machinery. Operator enclosure

environment. Part 5 : windscreen defrosting system test

method.)

(Earth-moving machinery. Operator enclosure

environment. Part 6 : determination of effect of solar

heating on operator enclosure.)

NF

E48-065-2-2000

NF

E48-065-3-2000

NF E48-372-1997

NF

E58-045-3-1995

NF

E58-045-4-1995

NF

E58-045-5-1995

NF

E58-045-6-1995

NF E62-253-1976

NF E63-056-1974

NF F00-079-1992

机床构造标准部件.多轴头.密封条框环

压力机配套工具.密封导环

通用铁路设备.橡胶O型密封圈

铁路车辆.带Ｏ形密封圈的仪器管路的连接

铁路车辆. 带Ｏ形密封圈的塞子

(UNIT HEADS. MULTI SPINDLE HEADS. JOINT

HOUSING RING.)

(PRESS GUIDE BUSH.)

(RAILWAY EQUIPMENT IN GENERAL.

COMPACT-RUBBER “O“ RINGS.)

(RAILWAY TRACTION AND ROLLING STOCK.

PIPEWORK CONNECTIONS ON DEVICES FITTED

WITH O-RING SEAL PLUGS. INTERFACES.)

(RAILWAY TRACTION AND ROLLING

STOCK-PLUGS WITH O-RING SEAL.)

NF F11-025-1984

NF F11-050-1985

NF F11-051-1990

(RAILWAY ROLLING STOCK. SELECTION OF O

铁路车辆.O形密封圈圈RINGS. DESIGNATION,DIMENSIONS AND

的选择,标志.尺寸和公差

TOLERANCES.)

铁路车辆.有凸缘的气动要装置的接头和密封接触面

铁路车辆.空调系统空气密封性试验

铁路车辆.车辆及其附助装置空气密封性的测定方法.试验和结果的说明

铁路车辆.再循环密封抽水马桶里使用的添加剂

(Railway rolling stock. Connecting and airtight

interfaces for flanged pneumatic apparatuses.)

(RAILWAY ROLLING STOCK. AIRTIGHTNESS

TEST OF AN AIR-CONDITIONING SYSTEM FOR

RAILWAY VEHICLES.)

(RAILWAY ROLLING STOCK. MEASUREMENT

METHODS OF AIRTIGHTNESS OF RAILWAY

VEHICLE AND ITS ELEMENTS. TESTS AND

INTERPRETATION OF RESULTS.)

(RAILWAY ROLLING STOCK. ADDITIVE

PRODUCT USED IN RECIRCULATION

RETENTION TOILETS.)

NF F11-101-1994

NF F13-013-1991

NF F17-011-1991

NF F19-601-1991

(PACKAGING. PACKAGING FOR

TRANSPORTING LIQUIDS. METAL OR PLASTIC

液体运输包装.危险品运DRUMS AND JERRYCANS,COMPOSITE

输用组合包装内部容器、NF H00-070-1983 PACKAGING,INTERIOR CONTAINERS OF

混合包装金属或塑料桶.COMBINED PACKAGING FOR THE TRANSPORT

空气密封试验.操作方式

OF DANGEROUS MATERIALS. AIRTIGHTNESS

TEST. PROCEDURE.)

工业包装.挠性热密封防护材料.水蒸汽透过系数为1G/M2.24H≤P≤4G/M2.24H的聚乙烯基单层材料

(INDUSTRIAL PACKAGINGS. FLEXIBLE AND

HEAT SEALING PROTECTION MATERIALS.

POLYETHYLENE BASED MONOLAYER

MATERIAL HAVING A WATER VAPOUR

TRANSMISSION COEFFICIENT OF 1 G/M2. 24

INFERIOR OR EQUAL P INFERIOR OR EQUAL 4

NF

H00-311-1-1992

G/M2. 24 H.)

NF H31-342-2000

钢桶.最小总容量216.5升的密封顶盖桶

(Steel drums - Non-removable head (tight head) drums

with a minimum total capacity of 216,5 l.)

(WIDE-MOUTH GLASS CONTAINERS.

DEVIATION FROM FLATNESS OF TOP SEALING

SURFACE. TEST METHODS. (EUROPEAN

STANDARD EN 29885).)

宽口玻璃仪器.顶部密封NF H35-007-1994 表面的平面度偏差.试验方法

NF H35-100-2000

包装.夯具密封室镗孔直(Packaging - Cork mouth finish with a bore diameter of

径为18,5mm的软木嘴塞 18,5 mm for corks and tamper evident capsules.)

(AEROSOL DISPENSERS. RAPID TEST.

TIGHTNESS OF VALVE MECHANISMS AND

CLINCH.)

烟雾发生器.压力分配容器（气雾剂容器型）.气NF H44-020-1988

雾剂容器上阀门的机械密封和安装的快速试验

NF

H94-001-3-2000

NF L17-030-1988

NF L17-035-1987

包装机械的安全性.第3(Safety of packaging machines - Part 3 : form, fill and

部分:成型,填充和密封机 seal machines.)

航空工业.密封产品.分类和使用

航空工业.结构密封产品、产品试验

(Aerospace industry. Sealants. Classification and use.)

(Aerospace industry. Structural sealants. Tests on

products.)

(POWER TAKE-OFF,SQUARED SHAFT DRIVE.

TWO STUD FLANGE WITHOUT OIL SEAL

GASKET.)

(POWER TAKE-OFF,SQUARED SHAFT DRIVE.

FOUR STUD FLANGE WITHOUT OIL SEAL

GASKET.)

(CONNECTORS,AXIAL SEALING. INTERNAL

THREAD BOSSES,ISO METRIC THREAD

PROFILE AND B.N.A.E. TOLERANCES.)

(AIRCRAFT FLUID INSTALLATIONS.

CONNECTORS,AXIAL SEALING,MALE THREAD

FITTINGS. SIM THREAD. (RECH.).)

(CONNECTORS,AXIAL SEALING. MALE

THREAD FITTINGS,ISO METRIC THREAD

PROFILE AND B.N.A.E. TOLERANCES.)

(CONNECTORS,AXIAL SEALING. MALE

THREAD FITTINGS,ISO METRIC THREAD

PROFILE AND TOLERANCES.)

(CONNECTORS,AXIAL SEALING. INTERNAL

方轴传动装置.２销法兰.NF L34-111-1980

无油密封垫圈

方轴传动装置.４孔法兰.NF L34-113-1980

无油密封垫圈

轴向密封接头.ＩＳＯ米NF L40-101-1974 制阴螺纹剖面的凹端和BNAE公差

飞机的液体装置.国际单NF L40-102-1966 位米制螺纹凸端的轴向密封接头

轴向密封接头.ISO米制NF L40-103-1974 螺纹剖面的凸端和BNAE公差

轴向密封接头.ISO米制NF L40-104-1973 螺纹剖面的凸端和ISO米制螺纹公差

NF L40-105-1973 轴向密封接头.ISO 米制

阴螺纹剖面凸端和ISO米制螺纹公差

THREAD BOSSES,ISO METRIC THREAD

PROFILE AND TOLERANCES.)

航空和航天.经向密封接(Aerospace fitting joint assembly, radial sealing. Male

NF L40-112-1987 头.阳螺纹剖面和ISO 米thread fittings. ISO metric thread profile and tolerances.

制螺纹公差.尺寸 Dimensions.)

航空和航天.经向密封接(Aerospace fitting joint assembly, radial sealing.

NF L40-113-1987 头.阴螺纹剖面和ISO 米Internal thread bosses. ISO metric thread profile and

制螺纹公差.尺寸 tolerances. Dimensions.)

NF L40-114-1987

航空和航天.径向密封接头.环形接头.尺寸

(Aerospace fitting joint assembly, radial sealing.

O-rings. Dimensions.)

(Aerospace series - Pipe coupling 8 o30' up to 28 000

kPa - Dynamic beam seal - Metric series - Technical

specification.)

(Aerospace series - Pipe couplings 8 o30' - Dynamic

beam seal end for elbows, tees and crosses - Geometric

configuration.)

(Aerospace series - Pipe coupling 8 o30' - Dynamic

beam seal end for ferrule, welded - Geometric

configuration.)

航空航天系列.8°30'～

28 000 kPa管联接件.动NF L43-350-2002

态梁密封端.米制系列.技术规范

航空航天系列.管联接器8°30'.弯管、T形管和十NF L43-352-2002

字管用动态梁密封端.几何构型

航空航天系列.管联接器NF L43-353-2002 8°30'.金属包头焊接用动态梁密封端.几何构型

航空航天系列. 8°30'钛合(Aerospace series - Pipe couplings 8 o30' in titanium

NF L43-361-2002 金管连接件.带动态梁密alloy - Ferrules, welded, with dynamic beam seal end.)

封端的焊接卡套

航空航天系列.钛合金管(Aerospace series - Pipe coupling 8 o30' in titanium

NF L43-366-2002 联接器8°30'.带密封环的alloy - Adaptors, reduced pipe end, with lockring.)

异径管端接头

航空航天系列.8°30'钛合金管联接件.带动态粱密NF L43-388-2002

封端的端部焊接减径的卡套

(Aerospace series - Pipe coupling 8 o30' in titanium

alloy - Ferrules with dynamic beam seal end, welded

and reduced at pipe end.)

航空航天系列.钛合金管(Aerospace series - Pipe coupling 8 o30' in titanium

联接器8°30'.检修用带动NF L43-406-2002 alloy - Ferrules, welded with dynamic beam seal end,

态梁密封端的焊接金属for repair.)

包头

航空航天系列.管连接件(Aerospace series - Pipe coupling, 37 o - Design

NF L43-614-2003 37度.设计构型.英制.第1configuration - Inch series - Part 1 : male sealing ends,

部分:凸形密封球端 spherical.)

NF L43-617-2003 航空航天系列.管连接件(Aerospace series - Pipe coupling, 37 o - Design

37度.设计构型.英制.第4configuration - Inch series - Part 4 : female sealing

部分:凹口密封端 ends.)

航空航天系列.管连接件.温度范围:-55℃～ (Aerospace series - Pipe coupling - O-rings in rubber

NF L46-018-2002 135 ℃75 IRHD的晴基丁NBR, 75 IRHD, temperature range : - 55 oC to + 135

二烯橡胶(NBR)的O型oC.)

密封圈

NF L46-021-2002

NF L46-311-1966

航空航天系列.O形密封环凹槽.尺寸

飞行器的流体装置.螺纹密封塞.(RECH.)

(Aerospace series - O-ring grooves - Dimensions.)

(AIRCRAFT FLUID INSTALLATIONS. SCREWED

SEALING PLUGS. (RECH.).)

(SCREWED SEALING PLUGS,AXIAL SEALING.

ISO METRIC THREAD PROFILE AND

TOLERANCES.)

(Aerospace series - Pipe coupling 8 o30' in titanium

alloy - Ferrules, blind, with dynamic beam seal end.)

(Aerospace series. Elements of electrical and optical

connection. Test methods. Part 322 : hermeticity.)

(Aerospace series. Elements of electrical and optical

connection. Test methods. Part 324 : interfacial

sealing.)

(Aerospace series. Elements of electrical and optical

connection. Test methods. Part 407 : durability of

contact retention system and seals.)

(Aerospace series - Elements of electrical and optical

connection - Test methods - Part 512 : effectiveness of

non-removable fixing of hermetically sealed connector

shell.)

(Aerospace series - Elements of electrical and optical

connection - Test methods - Part 6323 : optical

elements - Thermal shock (Hermetically sealed

devices).)

轴向密封塞.ISO 米制螺NF L46-315-1979

纹剖面和公差

航空航天系列.钛合金

NF L46-332-2002 8°30'管接头.带动态梁密封端的单头卡套

航空航天系列.电气及光NF

学连接元件.试验方法.第L54-002-041-1998

322部分:密封性

航空航天系列.电气及光NF

学连接元件.试验方法.第L54-002-043-1998

324部分:界面密封

航空航天系列.电气及光NF 学连接的元件.试验方法.L54-002-050-1999 第407部分:接触保持系统和密封的耐久性

航空航天系列.电气和光学连接的元件.试验方法.NF

第512部分:密封的连接L54-002-080-2002

件外壳的非移动固定件的效果

航空航天系列.电气和光NF 学连接元件.试验方法.第L54-002-123-2003 6323部分:光学元件.热冲击(密封装置)

航空航天系列.电气及光(Aerospace series - Elements of electrical and optical

NF 学连接元件.试验方法.第connection - Test methods - Part 6324 : optical

L54-002-124-2002 6324部分:光学元件.界面elements - Interfacial sealing.)

间密封

航空器材.后部非密封的闭锁的,带塑料箱的,使用NF L54-191-1988

温度55℃-175℃的密封矩形电接头

NF L56-110-1966 圆柱形密封蓄电池

NF L58-147-1967 高灵敏度密封换向开关

NF L58-155-1964

飞行器电气开关设备.密封按钮开关

(CONNECTORS,ELECTRICAL,RECTANGULAR,WITH SEALED AND NON SEALED REAR,PLASTIC

SHELL,LOCKING DEVICE AND OPERATING

TEMPERATURES. 55 DEGREES C TO 175

DEGREES C.)

(SEALED CYLINDRICAL ELECTRIC

ACCUMULATORS.)

(SEALED PRESSURE SENSITIVE INVERTER

SWITCH.)

(SWITCHGEAR FOR AIRCRAFT. SEALED

PUSH-BUTTON SWITCHES.)

(SEALED PLUG-IN RELAYS.)

(SWITCHGEAR FOR AIRCRAFT. MINIATURE

SEALED REVERSE CURRENT DOUBLE POLE

RELAYS.)

(SWITCHGEAR FOR AIRCRAFT. MINIATURE

SEALED REVERSE CURRENT DOUBLE POLE

RELAYS.)

(SWITCHGEAR FOR AIRCRAFT. FIXING OF

BASE FOR 3 AMPERES DOUBLE POLE SEALED

REVERSE CURRENT RELAYS.)

(SWITCHGEAR FOR AIRCRAFT. 10 AMPERES

MINIATURE SEALED REVERSE CURRENT

DOUBLE POLE RELAYS.)

(SWITCHGEAR FOR AIRCRAFT. FIXING OF

BASE FOR 10 AMPERES MINIATURE SEALED

REVERSE CURRENT DOUBLE POLE RELAYS.)

(SWITCHGEAR FOR AIRCRAFT. MINIATURE

SEALED REVERSE CURRENT 4-POLE RELAYS.)

(SWITCHGEAR FOR AIRCRAFT. FIXING OF

BASE FOR 3 AMPERES SEALED REVERSE

CURRENT 4-POLE RELAYS.)

(SWITCHGEAR FOR AIRCRAFT. 10 AMPERES

MINIATURE SEALED REVERSE CURRENT

4-POLE RELAYS.)

(SWITCHGEAR FOR AIRCRAFT. FIXING OF

BASE FOR 10 AMPERES MINIATURE SEALED

REVERSE CURRENT 4-POLE RELAYS.)

NF L58-305-1975 插入式密封继电器

飞行器开关装置.双极反NF L58-320-1966

向密封小型继电器

飞行器电气开关设备.双NF L58-321-1963 极换向开关小型密封继电器

飞机电气设备.３A双极NF L58-322-1966 换向开关密封继电器支架的安装

飞机电气设备.双极１０NF L58-323-1966 A换向开关小型密封继电器

飞机电气设备.双极１０NF L58-324-1966 A换向开关密封继电器支架的安装

NF L58-325-1966

飞行器开关装置.4极反向密封小型继电器

飞机电气设备.四极3ANF L58-326-1966 转向开关密封继电器支架的安装

飞机电气设备.１７安转NF L58-327-1966 向四极开关小型密封继电器

飞机电气设备.四极１０NF L58-328-1966 安换向开关密封继电器支架的安装

飞行器开关装置.双极反NF L58-330-1966

向密封超小型继电器

NF L58-333-1968

NF L58-335-1968

１５A四极转向开关密封继电器

１５A双极转向开关小型密封继电器

(SWITCHGEAR FOR AIRCRAFT. SEALED

DOUBLE POLE REVERSE CURRENT MIDGET

RELAYS.)

(13 AMPERES 4-POLE SEALED REVERSE

CURRENT RELAYS.)

(SEALED MINIATURE DOUBLE POLE REVERSE

CURRENT 15 AMPERES RELAYS.)

(SEALED TRIPLE POLE RELAYS,10

AMPERES,HIGH STRENGTH (10 TIMES RATED

CURRENT).)

(NUCLEAR CTIVE

INGS-TEST FOR

CONTENTS LEAKAGE.)

(Nuclear energy. Sealed radioactive sources. General

and classification.)

(Unsealed radioactive substances. Identification and

certificate.)

(Limiting enclosures. Classification of enclosures

according to their sealing capacity.)

(Components for containment enclosures. Part 1 :

glove/bag ports, bungs for glove/bag ports, enclosure

rings and interchangeable units.)

(Components for containment enclosures. Part 2 :

gloves, welded bags, gaiters for remote-handling tongs

and for manipulators.)

(Components for containment enclosures - Part 3 :

transfer systems such as plain doors, airlock chambers,

double door transfer systems, leaktight connections for

waste drums.)

(Components for containment enclosures - Part 4 :

ventilation and gas-cleaning systems such as filters,

traps, safety and regulation valves, control and

protection devices.)

(PETROLEUM INDUSTRY. FLANGES AND SOLID

WEDGE STEEL GATE-VALVES.)

(Building covering. Extruded mastic sealing strips for

fibre-cement roofing. Specifications. Tests.)

带连接装置的１０A３NF L58-342-1975

相密封继电器.Ⅳ级

核能.放射性物质的包装.NF M60-301-1977

包装物件密封试验

NF M61-002-1984

NF M61-004-1984

NF M62-200-1982

NF

M62-301-1-1997

NF

M62-301-2-1997

核能.密封放射源.概述和分类

非密封放射物质.识别和证明

安全壳.按安全壳的密封性分类

密封罩用组件.第1部分:手套/布袋口,手套/布袋盖,密封环和互换部件

密封罩用组件.第2部分:机械手和遥控操作抓手用手套,焊接袋,鞋罩

密封罩用组件.第3部分:光面门用传送系统、气闸室、双开门用传送系统和废鼓形容器的密封连接

密封罩用组件.第4部分:通风和气体清洁系统(如:过滤器和疏水阀)的安全和调节阀门以及控制和保护装置

石油工业.带钢制法兰硬块密封物有斜座的阀门

建筑物覆盖物.纤维混凝土屋顶挤压胶合板密封NF

M62-301-3-2000

NF

M62-301-4-2001

NF M87-402-1973

NF P30-303-1998

带材.规范.试验

NF P30-305-1995

NF

P61-202-1-2003

NF

P61-202-2-1994

NF

P61-202-2-2003

(BUILDING COVERING. EXTRUDED MASTIC

屋顶.金属屋顶用挤压胶SEALING STRIPS FOR METALLIC ROOFING.

粘水泥密封片.规范.试验

SPECIFICATIONS. TEST.)

DTU 52-1.施工.密封地板.第1部分:技术规范

(DTU 52.1 - Execution of work - Sealed flooring - Part

1 : technical specifications.)

DTU 52.1.施工.私人市(DTU 52.1 - Execution of work - Private markets -

场.地板密封.第2部分:特Sealed flooring - Part 2 : special clauses book.)

殊条款

DTU 52.1.施工.专用市(DTU 52.1 - Execution of work - Private markets -

场.密封地板.第2部分:特Sealed flooring - Part 2 : special clauses.)

殊条款

弹性地板覆盖物.密封强度的测定

建筑物用玻璃.隔热玻璃组件.第4部分:封边密封件的物理特性的试验方法

密封性.糊状产品

(RESILIENT FLOOR COVERINGS.

DETERMINATION OF SEAM STRENGTH.

(EUROPEAN STANDARD EN 684).)

(Glass in building - Insulating glass units - Part 4 :

methods of test for the physical attributes of edge

seals.)

(WATERPROOFING. WATERPROOFING

MATERIALS.)

NF P62-128-1996

NF P78-474-2002

NF P84-304-1971

NF P84-308-1969

密封性.45S 板状沥青玻(LEAKTIGHTNESS. BITUMINIZED FIBREGLASS

璃油毡(45SVV板状沥青FELT 45 S WITH SLATE FINISH. (BITUMINIZED

油毡) FELT W 45 S WITH SLATE FINISH).)

密封性.高强度玻璃纱(36S.V.V.H.R.)加强沥青油毡

(WATERPROOFING. BITUMEN FELT WITH HIGH

STRENGTH GLASS-FIBRE BASE (TYPE 36 S V.V.

- H.R.). DEFINITION,SPECIFICATIONS.)

NF P84-313-1987

NF

P85-210-1-2002

DTU 44.1.建筑工程.使用(DTU 44.1 - Building works - Sealing joint front by

密封剂的密封接头面.第implementation of sealants - Part 1 : technical clauses.)

1部分:技术条款

DTU 44.1.建筑工程.个人(DTU 44.1 - Building works - Private contracts -

合同.使用密封剂的密封Sealing joint front by implementation of sealants - Part

接头面.第2部分:特殊条2 : special clauses.)

款

填缝产品.密封填缝用腻子.规范

木作密封填缝用产品.建(JOINTING PRODUCTS. SEALANTS FOR

WATER-TIGHT SEALING OF JOINTS.

SPECIFICATIONS.)

(SEALING PROFILES,JOINERY PRODUCTS.

NF

P85-210-2-2002

NF P85-305-1991

NF P85-411-1987

筑物与地梁之间的剖面.塑性PVC热塑材料

填缝料.细木作业的窗扇门扉和横梁之间的密封填料.橡胶材料

房屋建筑.接点密封.体积和容量变化的测定

缝隙.密封缝隙用弹性胶泥.平衡稳定性测定

缝隙.密封缝隙用弹性胶泥,拉力作用下附着粘度性能测定

缝隙.密封缝隙用弹性胶泥.循环试验测定附着粘度性能.拉伸.压缩

房屋建筑.连接件.受热、水和透过玻璃的人造光照射后密封胶的粘合性的测定

房屋建筑.密封剂.浸水后在保持的张力下粘接/附着特性的测定

房屋建筑.密封剂.浸水后在保持的张力下粘接/附着特性的测定

房屋建筑.密封剂.在变化温度下粘接/附着特性的测定

建筑结构.密封料.在可变温度下的粘附作用/粘聚性能的测定

房屋建筑.密封剂.抗压缩测定

密封缝隙用产品.腻子.通过剪切直至断裂进行粘PROFILES BETWEEN DOOR LEAF AND DOOR

FRAME. PLASTICIZED PVC THERMOPLASTIC

MATERIAL.)

(JOINTING PRODUCTS. SEALING JOINT

BETWEEN CASEMENT AND FRAME FOR WOOD

JOINERY. RUBBER-BASED MATERIALS.)

(Building construction. Sealants for joints.

Determination of change in mass and volume.)

(SEALS. ELASTOMER BASE MASTICS USED FOR

SEALING. DETERMINATION OF WEIGHT

STABILITY.)

(SEALS. ELASTOMER BASE MASTICS USED FOR

SEALING. DETERMINATION OF

ADHESIVNESS-COHESION. CHARACTERISTICS

UNDER TENSILE STRESS.)

(SEALS. ELASTOMER BASE MASTICS USED FOR

SEALING. DETERMINATION OF

ADHESIVNESS-COHESION CHARACTERISTICS

BY CYCLIC TENSILE-COMPRESSION TESTS.)

(Building construction - Jointing products -

Determination of adhesion/cohesion properties of

sealants after exposure to heat, water and artificial light

through glass.)

(Building construction. Sealants. Determination of

adhesion/cohesion properties at maintained extension

after immersion in water.)

(Building construction. Sealants. Determination of

adhesion/cohesion properties after immersion in water.)

(Building construction. Sealants. Determination of

adhesion/cohesion properties at variable temperatures.)

(Building construction. Sealants. Determination of

adhesion/cohesion properties at variable temperatures.)

(Building construction. Sealants. Determination of

resistance to compression.)

(JOINTING PRODUCTS. SEALANTS.

DETERMINATION OF ADHESIVE AND

NF P85-412-1988

NF P85-502-1998

NF P85-503-1972

NF P85-504-1972

NF P85-505-1972

NF P85-516-2003

NF P85-517-1998

NF P85-518-1998

NF P85-519-1998

NF

P85-519PR-1998

NF P85-521-1998

NF P85-522-1990

性-粘聚力测定.(欧洲标准EN 28394)

房屋建筑.密封缝隙用产品.单一成分腻子挤压性测定.(欧洲标准EN

28349)

密封剂.热处理后用耐久拉伸强度测定粘附力和内粘聚力测定

密封剂.热处理后进行拉伸试验直至拉断时的粘附力和内粘聚力的测定

连接产品.密封用釉料和化合物.粘滞油基密封剂.规范

连接产品.密封用釉料和化合物.粘滞油基密封剂.在张力负荷条件下粘着特性的测定

连接产品.密封用釉料和化合物.粘滞油基密封剂.抗压特性测定

连接产品.密封用釉料和化合物.粘滞油基密封剂.密封剂和层压玻璃之间混溶比试验

连接产品.密封用釉料和化合物.粘滞油基密封剂.弹性型密封剂.规范

连接产品.密封用釉料和化合物.粘滞油基密封剂.粘滞型密封剂.规范

密封缝隙用产品.密封用上釉材料和化合物.预制带材密封剂.规范

密封缝隙用产品.密封用上釉材料和化合物.预制带材密封剂.压力下特性COHESIVE FORCE BY SHEARING TO RUPTURE.)

(BUILDING CONSTRUCTION. JOINTING

PRODUCTS. DETERMINATION OF

EXTRUDABILITY OF ONE-COMPONENT

SEALANTS. (EUROPEAN STANDARD EN 28394).)

(Sealants - Determination of adhesive and cohesive

force by endurance tensile strength after thermal

treatment.)

(Sealants - Determination of adhesive and cohesive

force by tensile strength test until rupture after thermal

treatment.)

(JOINTING PRODUCTS. GLAZING MATERIALS

AND COMPOUNDS FOR SEALING. PLASTIC-OIL

BASED SEALANTS. SPECIFICATIONS.)

(Jointing products. Glazing materials and compounds

for sealing. Plastic-oil based sealants. Determination of

adhesion-cohesion properties under tensile loading.)

(JOINTING PRODUCTS. GLAZING MATERIALS

AND COMPOUNDS FOR SEALING. PLASTIC-OIL

BASED SEALANTS. DETERMINATION OF

COMPRESSIVE STRENGTH CHARACTERISTICS.)

(JOINTING PRODUCTS. GLAZING MATERIALS

AND COMPOUNDS FOR SEALING. PLASTIC-OIL

BASED SEALANTS. TEST OF SPECIFIC

COMPATIBILITY BETWEEN SEALANT AND

LAMINATED GLASS.)

(JOINTING PRODUCTS. GLAZING MATERIALS

AND COMPOUNDS FOR SEALING. ELASTIC

TYPE SEALANTS. SPECIFICATIONS.)

(JOINTING PRODUCTS. GLAZING MATERIALS

AND COMPOUNDS FOR SEALING. PLASTIC

TYPE SEALANTS. SPECIFICATIONS.)

(Jointing products. Glazing materials and compounds

for sealing. Sealants in preformed strips.

Specifications.)

(Jointing products. Glazing materials and compounds

for sealing. Sealants in preformed strips. Determination

of characteristics under compression.)

NF P85-524-1991

NF P85-527-2003

NF P85-528-2003

NF P85-530-1992

NF P85-531-1992

NF P85-532-1992

NF P85-533-1992

NF P85-540-1992

NF P85-541-1992

NF P85-550-1998

NF P85-551-1998

的测定

密封缝隙用产品.密封用上釉材料和化合物.预制带材密封剂.拉力下粘着力的测定

密封缝隙用产品.密封用上釉材料和化合物.预制带材密封剂.流变稳定性的评估

密封缝隙用产品.密封用上釉材料和化合物.预制带材密封剂.热稳定性的评估

连接产品.密封用釉料和化合物.粘滞油基密封剂.由柔软蜂窝状材料制成的热垫层.规范

连接产品.密封用釉料和化合物.粘滞油基密封剂.由柔窝状材料制成的热垫层.抗压特性测定

密封缝隙用产品.凸凹磁砖粘接胶合.规范

密封缝隙用产品.凸凹磁砖粘接胶合.试验方法

热用接缝密封胶.第11部分:功能试验中沥青试验块制备以及与沥青路面兼容性测定的试验方法

(Jointing products. Glazing materials and compounds

for sealing. Sealants in preformed strips. Determination

of adhesion-cohesion properties under tensile.)

(JOINTING PRODUCTS. GLAZING MATERIALS

AND COMPOUNDS FOR SEALING. SEALANTS IN

PREFORMED STRIPS. ASSESSMENT OF

RHEOLOGICAL STABILITY.)

(JOINTING PRODUCTS. GLAZING MATERIALS

AND COMPOUNDS FOR SEALING. SEALANTS IN

PREFORMED STRIPS. DETERMINATION OF

HEAT STABILITY.)

(JOINTING PRODUCTS. GLAZING MATERIALS

AND COMPOUDS FOR SEALING. BEDDING

DEVICES MADE OF FLEXIBLE CELLULAR

MATERIALS. SPECIFICATIONS.)

(Jointing products. Glazing materials and compounds

for sealing. Bedding devices made of flexible cellular

materials. Determination of characteristics under

compression loading.)

(JOINTING PRODUCTS. MASTICS FOR BONDING

OF CONVEX OR CONCAVE TILES.

SPECIFICATIONS.)

(JOINTING PRODUCTS. MASTICS FOR BONDING

OF CONNEX OR CONCAVE TILES. TEST

METHODS.)

(Hot applied joint sealants - Part 11 : test method for

the preparation of asphalt test blocks used in the

function test and for the determination of compatibility

with asphalt pavements.)

NF P85-552-1998

NF P85-553-1998

NF P85-554-1998

NF P85-560-1992

NF P85-561-1992

NF P85-610-1998

NF P85-611-1998

NF

P98-880-11-2003

NF

P98-880-3-2003

NF

P98-880-9-2003

NF

P98-897-1-2003

热用接缝密封胶.第3部(Hot applied joint sealants - Part 3 : test method for the

分:渗透性和回复性(回弹determination of penetration and recovery (resilience).)

性)测定的试验方法

热用接缝密封胶.第9部分:与沥青路面兼容性测定的试验方法

冷用接缝密封胶.第1部分:硬化速度测定的试验方法

(Hot applied joint sealants - Part 9 : test method for the

determination of compatibility with asphalt

pavements.)

(Cold applied joint sealants - Part 1 : test method for

the determination of rate of cure.)

NF

P98-897-2-2003

NF

P98-897-3-2003

冷用接缝密封胶.第2部分:指触干时间测定的试验方法

冷用接缝密封胶.第3部分:自动找平特性测定的试验方法

冷用接缝密封胶.第4部分:浸入到试验燃料后质量和体积变化测定的试验方法

冷用接缝密封胶.第5部分:测定耐水解作用的试验方法

冷用密封胶.第6部分:浸入到化学液后粘着性/凝聚性测定的试验方法

冷用密封胶.第7部分:耐火性测定的试验方法

冷用接缝密封胶.第8部分:用紫外线辐射法进行人工风化特性测定的试验方法

道路车辆.气动制动系统.第1部分:带平面密封面的管,阳模管配合件,螺纹孔

道路车辆.气动制动系统.第1部分:带锥形密封面的管,阳模管配合件,螺纹孔

(Cold applied joint sealants - Part 2 : test method for

the determination of tack free time.)

(Cold applied joint sealants - Part 3 : test method for

the determination of self-levelling properties.)

(Cold applied joint sealants - Part 4 : test method for

the determination of the change in mass and volume

after immersion in test fuel.)

(Cold applied joint sealants - Part 5 : test method for

the determination of the resistance to hydrolysis.)

(Cold applied joint sealants - Part 6 : test method for

the determination of the adhesion/cohesion properties

after immersion in chemical liquids.)

(Cold applied joint sealants - Part 7 : test method for

the determination of the resistance to flame.)

(Cold applied joint sealants - Part 8 : test method for

the determination of the artificial weathering by

UV-irradiation.)

(Road vehicles. Pneumatic braking systems. Part 1 :

pipes, male fittings and tapped holes with facial sealing

surface.)

(Road vehicles. Pneumatic braking systems. Part 2 :

pipes, male fittings and tapped holes with conical

sealing surface.)

(Road vehicles. Elastomeric O-rings for hydraulic drum

brake wheel cylinders using a petroleum base hydraulic

brake fluid (service temperature 120 degrees C max.).)

(ROAD VEHICLES. ELASTOMERIC CUPS AND

SEALS FOR CYLINDERS FOR HYDRAULIC

BRAKING SYSTEMS USING A PETROLEUM

BASE HYDRAULIC BRAKE FLUID (SERVICE

TEMPERATURE 120 DEGRES C MAX.).)

(Road vehicles. Elastomeric seals for hydraulic disc

NF

P98-897-4-2003

NF

P98-897-5-2003

NF

P98-897-6-2003

NF

P98-897-7-2003

NF

P98-897-8-2003

NF

R12-634-1-1998

NF

R12-634-2-1998

道路车辆.使用石油基液压制动液(最高工作温度NF R12-645-1987

120℃)C)的鼓式闸轮液压缸用弹性O形密封圈

道路车辆.使用石 油基液压制动液(最高工作温NF R12-646-1987

度120℃)C)的液压制动系统用弹性环和密封件

NF R12-647-1987 道路车辆.使用石油基液

压制动液(最高工作温度120℃)C)的盘式制动液压缸用弹性密封件

道路车辆.线路板密封和NF R13-459-1998 非密封连接件连接界面.总则

道路车辆.非密封机载连接器用连接界面.1.5MMNF R13-480-1999

和/或2.8MM一栈接触连接器

NF

R16-214-1-1992

内燃机.高压注油管用钢管.第1部分:密封冷拔单壁钢管的要求

brake cylinders using a petroleum base hydraulic brake

fluid (service temperature 120 degrees C max).)

(Road vehicles. Connection interface for on-board

sealed and unsealed connectors. General.)

(ROAD VEHICLES. CONNECTION INTERFACE

FOR UNSEALED ON-BOARD CONNECTORS.

CATEGORY 1,5 MM AND/OR 2,8 MM ONE STACK

CONTACT CONNECTORS.)

(Compression-ignition engines. Steel tubes for

high-pressure fuel injection pipes. Part 1 : requirements

for seamless cold-drawn single-wall tubes.)

(ROAD VEHICLES. THREADING CONNECTION

FOR COMPONENTS INCLUDING AN “0“ RING.

DIMENSIONAL CHARACTERISTICS.)

(RADIAL FRICTION SEALING RINGS.)

(ACOUSTICS. NOISE EMITTED BY

REFRIGERATION EQUIPMENTS WITH

HERMETIC AND ACCESSIBLE HERMETIC

COMPRESSORS. TEST CODE FOR MEASURING

THE SOUND POWER.)

(ACOUSTICS. DETERMINATION OF SOUND

INSULATION PERFORMANCES OF

ENCLOSURES. PART 1 : MEASUREMENTS

UNDER LABORATORY CONDITIONS (FOR

DECLARATION PURPOSES). (EUROPEAN

STANDARD EN ISO 11546-1).)

(ACOUSTICS. DETERMINATION OF SOUND

INSULATION PERFORMANCES OF

ENCLOSURES. PART 2 : MEASUREMENTS IN

SITU (FOR ACCEPTANCE AND VERIFICATION

PURPOSES). (EUROPEAN STANDARD EN ISO

11546-2).)

(Portable fire extinguishers. Part 2 : tightness, dielectric

test, tamping test, special provisions.)

(Packaging materials and systems for medical devices

which are to be sterilized - Part 9 : uncoated nonwoven

materials of polyolefines for use in the manufacture of

heat sealable pouches, reels and lid)

道路车辆.带O型密封圈NF R94-301-1989

的螺纹连接尺寸特征

NF R99-001-1943 径向摩擦密封垫圈

声学.装有密封和半密封压缩机的制冷设备发出的噪音.声功率测量试验规则

NF S31-123-1986

NF

S31-620-1-1996

声学.密封罩隔声性能的测定.第1部分:申报用实验室条件下的测量

NF

S31-620-2-1996

声学.密封罩隔声性能的测定.第2部分:验收和校验部位的测量

NF S61-906-1996

轻便式灭火器.第2部分:密封性,介电试验,填塞试验和特殊设备

要消毒的医疗设备用包装材料和系统.第9部分:加热密封袋、卷轴和盖用未涂覆非织造聚烯烃材NF S98-059-2000

料.要求和试验方法

要消毒的医疗设备用包装材料和系统.第10部分:加热密封袋、卷轴和盖用胶粘涂覆非织造聚烯烃材料.要求和试验

弹性密封.排水设施用管接头密封用材料的要求.第1部分:硫化橡胶

(Packaging materials and systems for medical devices

which are to be sterilized - Part 10 : adhesive coated

nonwoven materials of polyolefines for use in the

manufacture of heat sealable pouches, reels)

(Elastomeric seals. Materials requirements for pipe

joint seals used in water and drainage applications. Part

1 : vulcanized rubber.)

NF S98-060-2000

NF

T47-305-1-1996

NF 弹性密封件.给水排水用(Elastomeric seals - Material requirements for pipe

T47-305-1/A2-200管道连接密封件的材料joints seals used in water and drainage applications -

3 要求.第1部分:硫化橡胶 Part 1 : vulcanized rubber.)

NF

T47-305-2-2000

弹性密封件.水和排水设施用管接头密封件材料的要求.第2部分:热塑性弹性材料

(Elastomeric seals - Materials requirements for pipe

joint seals used in water and drainage applications -

Part 2 : thermoplastic elastomers.)

(Elastomeric seals - Material requirements for pipe

joints seals used in water and drainage applications -

Part 2 : thermoplastic elastomers.)

(Elastomeric seals - Materials requirements for pipe

joint seals used in water and drainage applications -

Part 3 : cellular material of vulcanized rubber.)

(Elastomeric seals - Material requirements for joint

seals used in water and drainage applications - Part 3 :

cellular materials of vulcanized rubber.)

(Elastomeric seals - Materials requirements for pipe

joint seals used in water and drainage applications -

Part 4 : cast polyurethane sealing elements.)

(Elastomeric seals - Material requirements for pipe

joint seals in water and drainage applications - Part 4 :

cast polyurethane sealing elements.)

(Elastomeric seals - Materials requirements for seals

used in pipes and fittings carrying gas and hydrocarbon

fluids.)

(RUBBER O-RINGS. GENERAL PURPOSE

弹性密封件.给水排水用NF

管道连接密封件的材料T47-305-2/A1-200要求.第2部分:热塑弹性3

体

NF

T47-305-3-2000

弹性密封件.水和排水设施用管接头密封件材料的要求.第3部分:硫化橡胶泡沫材料

弹性密封件.给水排水用NF

管道连接密封件的材料T47-305-3/A1-200要求.第3部分:硫化橡胶3

多孔材料

NF

T47-305-4-2000

弹性密封件.水和排水设施用管接头密封件材料的要求.第4部分:铸造聚氨基甲酸乙酯密封元件

弹性密封件.给水排水用NF

管道连接密封件的材料T47-305-4/A1-200要求.第4部分:聚氨酯密3

封铸件

弹性密封件.输送气体和NF T47-306-2003 碳氢液体的管道和配件用密封件的材料要求

NF T47-504-1991 橡胶环形密封圈.静力学

和动力学工业应用的普通质量的一般用途的产品.精度级G.质量级4

PRODUCTS OF ORDINARY QUALITY FOR

STATIC AND DYNAMIC INDUSTRIAL

APPLICATIONS. PRECISION CLASS G. QUALITY

CLASS 4.)

(RUBBER O-RINGS. GENERAL PURPOSE

PRODUCTS OF SUPERIOR QUALITY FOR

STATIC AND DYNAMIC INDUSTRIAL

APPLICATIONS. PRECISION CLASS G. QUALITY

CLASS 2.)

(Asbestos and rubber compressed sheets for seals.

Measurement of dimensions.)

(ASBESTOS AND RUBBER COMPRESSED

SHEETS FOR SEALS. DETERMINATION OF

DENSITY.)

(Asbestos and rubber compressed sheets for seals.

Determination of tensile strength.)

(Asbestos and rubber compressed sheets for seals.

Liquid immersion test.)

(ASBESTOS AND RUBBER COMPRESSED

SHEETS FOR SEALS. BREAKING STRENGTH

AFTER LIQUID IMMERSION.)

(ASBESTOS AND RUBBER COMPRESSED

SHEETS FOR SEALS. RESISTANCE TO

HYDRAULIC PRESSURE AT AMBIENT

TEMPERATURE.)

(Asbestos and rubber compressed sheets for seals.

Determination of bending resistance.)

(Asbestos and rubber compressed sheets for seals.

Accelerated ageing test on oven.)

(PLASTICS PIPING SYSTEMS. MECHANICAL

JOINTS BETWEEN FITTINGS AND POLYOLEFIN

PRESSURE PIPES. TEST METHOD FOR

LEAKTIGHTNESS UNDER INTERNAL PRESSURE

OF ASSEMBLIES SUBJECTED TO BENDING.

(EUROPEAN STANDARD EN 713).)

(THERMOPLASTICS PIPING SYSTEMS.

NON-END-LOAD-BEARING ELASTOMERIC

SEALING RING TYPE JOINTS BETWEEN

PRESSURE PIPES AND MOULDED FITTINGS.

橡胶环形密封圈.静力学和动力学工业应用的普NF T47-505-1991

通质量的一般用途的产品.精度级G.质量级2

NF T48-101-1994

密封用石棉和橡胶压缩薄板.尺寸的测定

密封用石棉和橡胶压缩NF T48-102-1994

薄板.密度的测定

NF T48-103-1994

NF T48-105-1994

密封用石棉和橡胶压缩薄板.拉伸强度的测定

密封用石棉和橡胶压缩薄板.液体浸泡试验

密封用石棉和橡胶压缩NF T48-106-1994 薄板.液体浸泡后撕裂强度试验

密封用石棉和橡胶压缩NF T48-107-1994 薄板.常温下抗液压强度试验

NF T48-108-1994

密封用石棉和橡胶压缩薄板.抗弯曲强度试验

密封用石棉和橡胶压缩NF T48-109-1994 薄板.干燥箱的人工老化试验

塑料管道系统.配件和聚烯烃压力管的机械接合.NF T54-008-1994

在弯曲时内部压力引起的密封性的试验方法

热塑料管道系统.压力管和模塑配件的合成橡胶NF T54-009-1994

密封环型接合.在无轴向推力时内部流体静力学

压力下密封性的试验 TEST METHOD FOR LEAKIGHTNESS UNDER

INTERNAL HYDROSTATIC PRESSURE WITHOUT

END THRUST. (EUROPEAN STANDARD EN 714).)

(THERMOPLASTICS PIPING SYSTEMS.

END-LOAD BEARING JOINTS BETWEEN SMALL

DIAMETER PRESSURE PIPES AND FITTINGS.

TEST METHOD FOR LEAKTIGHTNESS UNDER

INTERNAL WATER PRESSURE, INCLUDING END

THRUST. (EUROPEAN STANDARD EN 715).)

(PLASTICS PIPING SYSTEMS. ELASTOMERIC

SEALING RING TYPE JOINTS AND

MECHANICAL JOINTS FOR THERMOPLASTICS

PRESSURE PIPING. TEST METHOD FOR

LEAKTIGHTNESS UNDER EXTERNAL

HYDROSTATIC PRESSURE. (EUROPEAN

STANDARD EN 911).)

(Plastics. Un-plasticized PVC parts dor piping. Simple

assemblies with sealing rings for domestic water

drainage piping. End use test. Specification.)

(Unplasticized polyvinyl chloride pipes and fittings.

Assembly by sealing rings for pressure pipelines.

Dimensional caracteristics.)

(Plastics. Unplasticized polyvinyl chloride pipes and

fittings. Assembly by sealing rings for pressure

pipelines. Fitness for use.)

(Plastics piping systems. Injection-moulded

thermoplastics fittings for elastic sealing ring type

joints for pressure piping. Test method for resistance to

a short-term internal pressure without end thrust.)

(PLASTICS. THERMOPLASTIC AND

THERMOSETTING VALVES. TEST OF

RESISTANCE TO PRESSURE.)

(Plastics piping systems. Thermoplastics piping

systems for soil and waste discharge. Test method for

airtightness of joints.)

(Plastics piping systems. Thermoplastics piping

systems for buried non-pressure applications. Test

methods for leaktightness of elastomeric sealing ring

type joints.)

塑料管道系统.压力管和配件的机械和胶合接合.NF T54-010-1994 在包含轴向推力的内部水压下密封性的试验方法

塑料管道系统.热塑塑料压力管道用的弹性密封NF T54-012-1995 环型接头和机械接头.外部液压条件下防漏密封试验方法

塑料.未增塑聚氯乙烯管道元件.生活污水无压排NF T54-037-1981

放设备用密封圈接头.使

用特性

装配有压力管用密封圈NF T54-038-1981 的未增塑聚氯乙烯管和接头.尺寸特性

塑料.未增塑聚氯乙烯压NF T54-039-1988 力管用密封圈的固定接头.使用特性.规范

塑料管道系统.压力管道用弹性密封圈型接头的NF T54-041-1994 热注塑料配件.耐无轴向力短暂内压力性能的试验方法

塑料.热固塑料阀.耐压和NF T54-082-1988

密封性试验

塑料管道系统.土壤和废NF T54-902-1995 料排出用热塑管道系统.粘接处密封度试验方法

塑料管道系统.埋置非压管道设备用热塑管道系NF T54-906-1996

统.弹性密封环型接头耐泄漏性试验方法

塑料管道系统.与未增塑聚氯乙烯管一起使用的NF T54-923-2000 未增塑聚氯乙烯弹性密封环式套筒接头.负压下密封试验法

热塑性管道系统.地下常压排污设施用接头.用密NF T54-926-2000 封压力评定法测定带热塑性弹性体(TPE)密封件接头的长期密封性

塑料管道系统.与未增塑聚氯乙烯管一起使用的NF T54-937-2000 弹性密封环式套筒接头.内压下角度偏转密封试验法

塑料管道系统.热水和冷NF T54-941-1999 水系统.真空密封性的检验方法

塑料管道系统.玻璃纤维增强热固塑料管和配件.NF T57-221-1996

短期内部压力下管壁密封性的检验的试验方法

塑料管道系统.玻璃纤维增强热固性塑料(GRP)构NF T57-224-1997 件.检验带有弹性密封件的刚性锁定的管套筒接头设计的试验方法

石油产品.润滑脂和燃烧NF T60-103-1968 油在密封容器中闪点的测定

国防用高能材料.物理-化学分析和性能.高能材料NF T70-365-2003 和密封衬里、抑制剂和热保护层之间粘结的特征.剪切试验

国防用高能材料.物理-化学分析和性能.高能材料NF T70-366-2003 和密封衬里、抑制剂和热保护之间的粘结特征.正常拉伸

NF V08-406-1993 密封容器中的加热食(Plastics piping systems - Elastomeric-sealing-ring-type

socket joints of unplasticized poly(vinyl chloride)

(PVC-U) for use with PVC-U pipes - Test method for

leaktightness under negative pressure.)

(Thermoplastics piping systems - Joints for buried

non-pressure sewage applications - Test method for

long-term sealing performance of joints with

thermoplastic elastomer (TPE) seals by estimating the)

(Plastics piping systems - Elastomeric-sealing-ring-type

socket joints for use with unplasticized poly(vinyl

chloride) (PVC-U) pipes - Test method for

leaktightness under internal pressure and with ang)

(Plastics piping systems - Systems for hot and cold

water - Test method for leaktightness under vacuum.)

(Plastics piping systems. Glass-reinforced

thermosetting plastics (grp) pipes and fittings. Test

methods to prove the leaktightness of the wall under

short-term internal pressure.)

(Plastics piping systems. Glass-reinforced

thermosetting plastics (GRP) components. Test

methods to prove the design of rigid locked

socket-and-spigot joints with elastomeric seals.)

(PETROLEUM PRODUCTS. CLOSED CUP FLASH

POINT OF LUBRICANTS AND FUEL OILS.)

(Energetic materials for defense - Physical-chemical

analysis and properties - Characterisation of the

bonding between energetic materials and liners,

inhibitors and thermal protections, shear.)

(Energetic materials for defense - Physical-chemical

analysis and properties - Characterisation of the

bonding between energetic materials and liners,

inhibitors and thermal protections, normal tractio)

(Heat-processed foods in hermetically sealed

物.pH值的测定

密封管中水流量的测定.NF X10-111-1988 均匀流量速度场的流速计测量法

密封管道中液体流量的NF X10-112-1977 测定.均匀流量速度场的双皮托管测量法

圆截面密封管道中液体NF X10-113-1982 流量的测定.剖面上一点流速的测定方法

密封管道中水流量的测NF X10-131-1974 定.示踪法.第1部分：综合

密封管道中水流量的测定.示踪法.第2部分：使NF X10-132-1975

用非放射性示踪物的恒流量喷射法

密封管道中水流量的测定.示踪法.第3部分：放NF X10-133-1977

射性示踪物恒流量喷射法

密封管道中水流量的测定.示踪法.第6部分：非NF X10-136-1977

放射性示踪物的过渡时间法

密封管道中水流量的测定.示踪法.第7部分：放NF X10-137-1977

射性示踪物的过渡时间法

密封管道中气体流量的NF X10-141-1982 测定.示踪法.第1部分：综合

密封管道中气体流量的测定.示踪法.第4部分：NF X10-144-1982

放射性示踪物的过渡时间法

NF X42-122-1998 生物工艺学.设备.密封性containers. Determination of ph.)

(MEASUREMENT OF CLEAN WATER FLOW IN

CLOSED CONDUITS. VELOCITY-AREA METHOD

USING CURRENT-METERS IN FULL CONDUITS

AND UNDER REGULAR FLOW CONDITIONS.)

(MEASUREMENT OF FLUID FLOW IN CLOSED

TY AREA METHOD USING

PITOT STATIC TUBES.)

(DETERMINATION OF FLOWRATE OF FLUIDS IN

CLOSED CONDUITS OF CIRCULAR

CROSS-SECTION. METHOD OF VELOCITY

MEASUREMENT AT ONE POINT OF THE

CROSS-SECTION.)

(MEASUREMENT OF WATER FLOW IN CLOSED

METHODS PART

I:GENERAL)

(MEASUREMENT OF WATER FLOW IN CLOSED

CONDUITS. TRACER METHODS PART II :

CONSTANT RATE INJECTION METHOD USING

NON-RADIOACTIVE TRACERS)

(MEASUREMENT OF WATER FLOW RATE IN

CLOSED CONDUITS. TRACER METHODS. PART

III: CONSTANT RATE INJECTION METHOD

USING RADIOACTIVE TRACERS.)

(MEASUREMENT OF WATER FLOW IN CLOSED

CONDUITS. TRACER METHODS-PAR

VI:TRANSIT TIME METHOD USING

NON-RADIOACTIVE TRACERS.)

(MEASUREMENT OF WATER FLOW IN CLOSED

CONDUITS. TRACER METHODS. PART

VII:TRANSIT TIME METHOD USING

RADIOACTIVE TRACERS.)

(Measurement of gas flow in conduits. Tracer methods.

Part 1 general.)

(MEASUREMENT OF GAS FLOW IN CONDUITS.

TRACER METHODS. PART 4 : TRANSIT TIME

METHOD USING RADIOACTIVE TRACERS.)

(Equipment. Guidance on testing procedures for

测试程序指南(欧洲标准EN 12298)

NF X42-131-1999

生物技术.轴密封件的性能标准

leaktightness.)

(Biotechnology. Performance criteria for shaft seals.)

(ROOFING. FASTENERS. DETERMINATION OF

THE CHARACTERISTIC RESISTANCE OF THE

ASSEMBLY. TEST METHOD TO DETERMINE

THE PULL-OUT LOAD OF FIXINGS OUT OF

INSULATING MATERIAL OR SEALING COATING

FROM THE FRAME.)

(AFTER-SALES SERVICE. AFTER-SALES

SERVICE INDEPENDENT REPAIR ENGINEERS

AND SERVICE PROVIDERS OPERATING ON

BEHALF OF THE DISTRIBUTION NETWORKS.)

英文名称

屋顶. 固定件.组件抗性的测定.测定绝缘材料或XP P 30-313-1997

框架密封包覆固定拉力负荷的测试方法

密封后装置.密封后装置独立修理工程和得益于分配网络的装置提供者操作

中文名称

XP X

50-004-1997

编号